SurveyMissionItem.cc

/****************************************************************************
 *
 *   (c) 2009-2016 QGROUNDCONTROL PROJECT <http://www.qgroundcontrol.org>
 *
 * QGroundControl is licensed according to the terms in the file
 * COPYING.md in the root of the source code directory.
 *
 ****************************************************************************/


#include "SurveyMissionItem.h"
#include "JsonHelper.h"
#include "MissionController.h"
#include "QGCGeo.h"
#include "QGroundControlQmlGlobal.h"
#include "QGCQGeoCoordinate.h"

#include <QPolygonF>

QGC_LOGGING_CATEGORY(SurveyMissionItemLog, "SurveyMissionItemLog")

const char* SurveyMissionItem::jsonComplexItemTypeValue =           "survey";

const char* SurveyMissionItem::_jsonGridObjectKey =                 "grid";
const char* SurveyMissionItem::_jsonGridAltitudeKey =               "altitude";
const char* SurveyMissionItem::_jsonGridAltitudeRelativeKey =       "relativeAltitude";
const char* SurveyMissionItem::_jsonGridAngleKey =                  "angle";
const char* SurveyMissionItem::_jsonGridSpacingKey =                "spacing";
const char* SurveyMissionItem::_jsonTurnaroundDistKey =             "turnAroundDistance";
const char* SurveyMissionItem::_jsonCameraTriggerDistanceKey =      "cameraTriggerDistance";
const char* SurveyMissionItem::_jsonCameraTriggerInTurnaroundKey =  "cameraTriggerInTurnaround";
const char* SurveyMissionItem::_jsonHoverAndCaptureKey =            "hoverAndCapture";
const char* SurveyMissionItem::_jsonGroundResolutionKey =           "groundResolution";
const char* SurveyMissionItem::_jsonFrontalOverlapKey =             "imageFrontalOverlap";
const char* SurveyMissionItem::_jsonSideOverlapKey =                "imageSideOverlap";
const char* SurveyMissionItem::_jsonCameraSensorWidthKey =          "sensorWidth";
const char* SurveyMissionItem::_jsonCameraSensorHeightKey =         "sensorHeight";
const char* SurveyMissionItem::_jsonCameraResolutionWidthKey =      "resolutionWidth";
const char* SurveyMissionItem::_jsonCameraResolutionHeightKey =     "resolutionHeight";
const char* SurveyMissionItem::_jsonCameraFocalLengthKey =          "focalLength";
const char* SurveyMissionItem::_jsonCameraObjectKey =               "camera";
const char* SurveyMissionItem::_jsonCameraNameKey =                 "name";
const char* SurveyMissionItem::_jsonManualGridKey =                 "manualGrid";
const char* SurveyMissionItem::_jsonCameraOrientationLandscapeKey = "orientationLandscape";
const char* SurveyMissionItem::_jsonFixedValueIsAltitudeKey =       "fixedValueIsAltitude";
const char* SurveyMissionItem::_jsonRefly90DegreesKey =             "refly90Degrees";

const char* SurveyMissionItem::settingsGroup =                  "Survey";
const char* SurveyMissionItem::manualGridName =                 "ManualGrid";
const char* SurveyMissionItem::gridAltitudeName =               "GridAltitude";
const char* SurveyMissionItem::gridAltitudeRelativeName =       "GridAltitudeRelative";
const char* SurveyMissionItem::gridAngleName =                  "GridAngle";
const char* SurveyMissionItem::gridSpacingName =                "GridSpacing";
const char* SurveyMissionItem::turnaroundDistName =             "TurnaroundDist";
const char* SurveyMissionItem::cameraTriggerDistanceName =      "CameraTriggerDistance";
const char* SurveyMissionItem::cameraTriggerInTurnaroundName =  "CameraTriggerInTurnaround";
const char* SurveyMissionItem::hoverAndCaptureName =            "HoverAndCapture";
const char* SurveyMissionItem::groundResolutionName =           "GroundResolution";
const char* SurveyMissionItem::frontalOverlapName =             "FrontalOverlap";
const char* SurveyMissionItem::sideOverlapName =                "SideOverlap";
const char* SurveyMissionItem::cameraSensorWidthName =          "CameraSensorWidth";
const char* SurveyMissionItem::cameraSensorHeightName =         "CameraSensorHeight";
const char* SurveyMissionItem::cameraResolutionWidthName =      "CameraResolutionWidth";
const char* SurveyMissionItem::cameraResolutionHeightName =     "CameraResolutionHeight";
const char* SurveyMissionItem::cameraFocalLengthName =          "CameraFocalLength";
const char* SurveyMissionItem::cameraTriggerName =              "CameraTrigger";
const char* SurveyMissionItem::cameraOrientationLandscapeName = "CameraOrientationLandscape";
const char* SurveyMissionItem::fixedValueIsAltitudeName =       "FixedValueIsAltitude";
const char* SurveyMissionItem::cameraName =                     "Camera";

SurveyMissionItem::SurveyMissionItem(Vehicle* vehicle, QObject* parent)
    : ComplexMissionItem(vehicle, parent)
    , _sequenceNumber(0)
    , _dirty(false)
    , _mapPolygon(this)
    , _cameraOrientationFixed(false)
    , _missionCommandCount(0)
    , _refly90Degrees(false)
    , _ignoreRecalc(false)
    , _surveyDistance(0.0)
    , _cameraShots(0)
    , _coveredArea(0.0)
    , _timeBetweenShots(0.0)
    , _metaDataMap(FactMetaData::createMapFromJsonFile(QStringLiteral(":/json/Survey.SettingsGroup.json"), this))
    , _manualGridFact                   (settingsGroup, _metaDataMap[manualGridName])
    , _gridAltitudeFact                 (settingsGroup, _metaDataMap[gridAltitudeName])
    , _gridAltitudeRelativeFact         (settingsGroup, _metaDataMap[gridAltitudeRelativeName])
    , _gridAngleFact                    (settingsGroup, _metaDataMap[gridAngleName])
    , _gridSpacingFact                  (settingsGroup, _metaDataMap[gridSpacingName])
    , _turnaroundDistFact               (settingsGroup, _metaDataMap[turnaroundDistName])
    , _cameraTriggerDistanceFact        (settingsGroup, _metaDataMap[cameraTriggerDistanceName])
    , _cameraTriggerInTurnaroundFact    (settingsGroup, _metaDataMap[cameraTriggerInTurnaroundName])
    , _hoverAndCaptureFact              (settingsGroup, _metaDataMap[hoverAndCaptureName])
    , _groundResolutionFact             (settingsGroup, _metaDataMap[groundResolutionName])
    , _frontalOverlapFact               (settingsGroup, _metaDataMap[frontalOverlapName])
    , _sideOverlapFact                  (settingsGroup, _metaDataMap[sideOverlapName])
    , _cameraSensorWidthFact            (settingsGroup, _metaDataMap[cameraSensorWidthName])
    , _cameraSensorHeightFact           (settingsGroup, _metaDataMap[cameraSensorHeightName])
    , _cameraResolutionWidthFact        (settingsGroup, _metaDataMap[cameraResolutionWidthName])
    , _cameraResolutionHeightFact       (settingsGroup, _metaDataMap[cameraResolutionHeightName])
    , _cameraFocalLengthFact            (settingsGroup, _metaDataMap[cameraFocalLengthName])
    , _cameraOrientationLandscapeFact   (settingsGroup, _metaDataMap[cameraOrientationLandscapeName])
    , _fixedValueIsAltitudeFact         (settingsGroup, _metaDataMap[fixedValueIsAltitudeName])
    , _cameraFact                       (settingsGroup, _metaDataMap[cameraName])
{
    _editorQml = "qrc:/qml/SurveyItemEditor.qml";

    // NULL check since object creation during unit testing passes NULL for vehicle
    if (_vehicle && _vehicle->multiRotor()) {
        _turnaroundDistFact.setRawValue(0);
    }

    connect(&_gridSpacingFact,                  &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(&_gridAngleFact,                    &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(&_turnaroundDistFact,               &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(&_cameraTriggerDistanceFact,        &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(&_cameraTriggerInTurnaroundFact,    &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(&_hoverAndCaptureFact,              &Fact::valueChanged,                        this, &SurveyMissionItem::_generateGrid);
    connect(this,                               &SurveyMissionItem::refly90DegreesChanged,  this, &SurveyMissionItem::_generateGrid);

    connect(&_gridAltitudeFact,                 &Fact::valueChanged, this, &SurveyMissionItem::_updateCoordinateAltitude);

    connect(&_gridAltitudeRelativeFact,         &Fact::valueChanged, this, &SurveyMissionItem::_setDirty);

    // Signal to Qml when camera value changes so it can recalc
    connect(&_groundResolutionFact,             &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_frontalOverlapFact,               &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_sideOverlapFact,                  &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraSensorWidthFact,            &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraSensorHeightFact,           &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraResolutionWidthFact,        &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraResolutionHeightFact,       &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraFocalLengthFact,            &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);
    connect(&_cameraOrientationLandscapeFact,   &Fact::valueChanged, this, &SurveyMissionItem::_cameraValueChanged);

    connect(&_cameraTriggerDistanceFact, &Fact::valueChanged, this, &SurveyMissionItem::timeBetweenShotsChanged);

    connect(&_mapPolygon, &QGCMapPolygon::dirtyChanged, this, &SurveyMissionItem::_polygonDirtyChanged);
    connect(&_mapPolygon, &QGCMapPolygon::pathChanged,  this, &SurveyMissionItem::_generateGrid);
}

void SurveyMissionItem::_setSurveyDistance(double surveyDistance)
{
    if (!qFuzzyCompare(_surveyDistance, surveyDistance)) {
        _surveyDistance = surveyDistance;
        emit complexDistanceChanged(_surveyDistance);
    }
}

void SurveyMissionItem::_setCameraShots(int cameraShots)
{
    if (_cameraShots != cameraShots) {
        _cameraShots = cameraShots;
        emit cameraShotsChanged(this->cameraShots());
    }
}

void SurveyMissionItem::_setCoveredArea(double coveredArea)
{
    if (!qFuzzyCompare(_coveredArea, coveredArea)) {
        _coveredArea = coveredArea;
        emit coveredAreaChanged(_coveredArea);
    }
}

void SurveyMissionItem::_clearInternal(void)
{
    // Bug workaround
    while (_simpleGridPoints.count() > 1) {
        _simpleGridPoints.takeLast();
    }
    emit gridPointsChanged();
    _simpleGridPoints.clear();
    _transectSegments.clear();

    _missionCommandCount = 0;

    setDirty(true);

    emit specifiesCoordinateChanged();
    emit lastSequenceNumberChanged(lastSequenceNumber());
}

int SurveyMissionItem::lastSequenceNumber(void) const
{
    return _sequenceNumber + _missionCommandCount;
}

void SurveyMissionItem::setCoordinate(const QGeoCoordinate& coordinate)
{
    if (_coordinate != coordinate) {
        _coordinate = coordinate;
        emit coordinateChanged(_coordinate);
    }
}

void SurveyMissionItem::setDirty(bool dirty)
{
    if (_dirty != dirty) {
        _dirty = dirty;
        emit dirtyChanged(_dirty);
    }
}

void SurveyMissionItem::save(QJsonArray&  missionItems)
{
    QJsonObject saveObject;

    saveObject[JsonHelper::jsonVersionKey] =                    3;
    saveObject[VisualMissionItem::jsonTypeKey] =                VisualMissionItem::jsonTypeComplexItemValue;
    saveObject[ComplexMissionItem::jsonComplexItemTypeKey] =    jsonComplexItemTypeValue;
    saveObject[_jsonManualGridKey] =                            _manualGridFact.rawValue().toBool();
    saveObject[_jsonFixedValueIsAltitudeKey] =                  _fixedValueIsAltitudeFact.rawValue().toBool();
    saveObject[_jsonHoverAndCaptureKey] =                       _hoverAndCaptureFact.rawValue().toBool();
    saveObject[_jsonRefly90DegreesKey] =                        _refly90Degrees;
    saveObject[_jsonCameraTriggerDistanceKey] =                 _cameraTriggerDistanceFact.rawValue().toDouble();

    QJsonObject gridObject;
    gridObject[_jsonGridAltitudeKey] =          _gridAltitudeFact.rawValue().toDouble();
    gridObject[_jsonGridAltitudeRelativeKey] =  _gridAltitudeRelativeFact.rawValue().toBool();
    gridObject[_jsonGridAngleKey] =             _gridAngleFact.rawValue().toDouble();
    gridObject[_jsonGridSpacingKey] =           _gridSpacingFact.rawValue().toDouble();
    gridObject[_jsonTurnaroundDistKey] =        _turnaroundDistFact.rawValue().toDouble();

    saveObject[_jsonGridObjectKey] = gridObject;

    if (!_manualGridFact.rawValue().toBool()) {
        QJsonObject cameraObject;
        cameraObject[_jsonCameraNameKey] =                  _cameraFact.rawValue().toString();
        cameraObject[_jsonCameraOrientationLandscapeKey] =  _cameraOrientationLandscapeFact.rawValue().toBool();
        cameraObject[_jsonCameraSensorWidthKey] =           _cameraSensorWidthFact.rawValue().toDouble();
        cameraObject[_jsonCameraSensorHeightKey] =          _cameraSensorHeightFact.rawValue().toDouble();
        cameraObject[_jsonCameraResolutionWidthKey] =       _cameraResolutionWidthFact.rawValue().toDouble();
        cameraObject[_jsonCameraResolutionHeightKey] =      _cameraResolutionHeightFact.rawValue().toDouble();
        cameraObject[_jsonCameraFocalLengthKey] =           _cameraFocalLengthFact.rawValue().toDouble();
        cameraObject[_jsonGroundResolutionKey] =            _groundResolutionFact.rawValue().toDouble();
        cameraObject[_jsonFrontalOverlapKey] =              _frontalOverlapFact.rawValue().toInt();
        cameraObject[_jsonSideOverlapKey] =                 _sideOverlapFact.rawValue().toInt();

        saveObject[_jsonCameraObjectKey] = cameraObject;
    }

    // Polygon shape
    _mapPolygon.saveToJson(saveObject);

    missionItems.append(saveObject);
}

void SurveyMissionItem::setSequenceNumber(int sequenceNumber)
{
    if (_sequenceNumber != sequenceNumber) {
        _sequenceNumber = sequenceNumber;
        emit sequenceNumberChanged(sequenceNumber);
        emit lastSequenceNumberChanged(lastSequenceNumber());
    }
}

bool SurveyMissionItem::load(const QJsonObject& complexObject, int sequenceNumber, QString& errorString)
{
    QJsonObject v2Object = complexObject;

    // We need to pull version first to determine what validation/conversion needs to be performed.
    QList<JsonHelper::KeyValidateInfo> versionKeyInfoList = {
        { JsonHelper::jsonVersionKey, QJsonValue::Double, true },
    };
    if (!JsonHelper::validateKeys(v2Object, versionKeyInfoList, errorString)) {
        return false;
    }

    int version = v2Object[JsonHelper::jsonVersionKey].toInt();
    if (version != 2 && version != 3) {
        errorString = tr("%1 does not support this version of survey items").arg(qgcApp()->applicationName());
        return false;
    }
    if (version == 2) {
        // Convert to v3
        if (v2Object.contains(VisualMissionItem::jsonTypeKey) && v2Object[VisualMissionItem::jsonTypeKey].toString() == QStringLiteral("survey")) {
            v2Object[VisualMissionItem::jsonTypeKey] = VisualMissionItem::jsonTypeComplexItemValue;
            v2Object[ComplexMissionItem::jsonComplexItemTypeKey] = jsonComplexItemTypeValue;
        }
    }

    QList<JsonHelper::KeyValidateInfo> mainKeyInfoList = {
        { JsonHelper::jsonVersionKey,                   QJsonValue::Double, true },
        { VisualMissionItem::jsonTypeKey,               QJsonValue::String, true },
        { ComplexMissionItem::jsonComplexItemTypeKey,   QJsonValue::String, true },
        { QGCMapPolygon::jsonPolygonKey,                QJsonValue::Array,  true },
        { _jsonGridObjectKey,                           QJsonValue::Object, true },
        { _jsonCameraObjectKey,                         QJsonValue::Object, false },
        { _jsonCameraTriggerDistanceKey,                QJsonValue::Double, true },
        { _jsonManualGridKey,                           QJsonValue::Bool,   true },
        { _jsonFixedValueIsAltitudeKey,                 QJsonValue::Bool,   true },
        { _jsonHoverAndCaptureKey,                      QJsonValue::Bool,   false },
        { _jsonRefly90DegreesKey,                       QJsonValue::Bool,   false },
    };
    if (!JsonHelper::validateKeys(v2Object, mainKeyInfoList, errorString)) {
        return false;
    }

    QString itemType = v2Object[VisualMissionItem::jsonTypeKey].toString();
    QString complexType = v2Object[ComplexMissionItem::jsonComplexItemTypeKey].toString();
    if (itemType != VisualMissionItem::jsonTypeComplexItemValue || complexType != jsonComplexItemTypeValue) {
        errorString = tr("%1 does not support loading this complex mission item type: %2:%3").arg(qgcApp()->applicationName()).arg(itemType).arg(complexType);
        return false;
    }

    _ignoreRecalc = true;

    _mapPolygon.clear();

    setSequenceNumber(sequenceNumber);

    _manualGridFact.setRawValue             (v2Object[_jsonManualGridKey].toBool(true));
    _fixedValueIsAltitudeFact.setRawValue   (v2Object[_jsonFixedValueIsAltitudeKey].toBool(true));
    _gridAltitudeRelativeFact.setRawValue   (v2Object[_jsonGridAltitudeRelativeKey].toBool(true));
    _hoverAndCaptureFact.setRawValue        (v2Object[_jsonHoverAndCaptureKey].toBool(false));

    _refly90Degrees = v2Object[_jsonRefly90DegreesKey].toBool(false);

    QList<JsonHelper::KeyValidateInfo> gridKeyInfoList = {
        { _jsonGridAltitudeKey,                 QJsonValue::Double, true },
        { _jsonGridAltitudeRelativeKey,         QJsonValue::Bool,   true },
        { _jsonGridAngleKey,                    QJsonValue::Double, true },
        { _jsonGridSpacingKey,                  QJsonValue::Double, true },
        { _jsonTurnaroundDistKey,               QJsonValue::Double, true },
    };
    QJsonObject gridObject = v2Object[_jsonGridObjectKey].toObject();
    if (!JsonHelper::validateKeys(gridObject, gridKeyInfoList, errorString)) {
        return false;
    }
    _gridAltitudeFact.setRawValue           (gridObject[_jsonGridAltitudeKey].toDouble());
    _gridAngleFact.setRawValue              (gridObject[_jsonGridAngleKey].toDouble());
    _gridSpacingFact.setRawValue            (gridObject[_jsonGridSpacingKey].toDouble());
    _turnaroundDistFact.setRawValue         (gridObject[_jsonTurnaroundDistKey].toDouble());
    _cameraTriggerDistanceFact.setRawValue  (v2Object[_jsonCameraTriggerDistanceKey].toDouble());

    if (!_manualGridFact.rawValue().toBool()) {
        if (!v2Object.contains(_jsonCameraObjectKey)) {
            errorString = tr("%1 but %2 object is missing").arg("manualGrid = false").arg("camera");
            return false;
        }

        QJsonObject cameraObject = v2Object[_jsonCameraObjectKey].toObject();

        // Older code had typo on "imageSideOverlap" incorrectly being "imageSizeOverlap"
        QString incorrectImageSideOverlap = "imageSizeOverlap";
        if (cameraObject.contains(incorrectImageSideOverlap)) {
            cameraObject[_jsonSideOverlapKey] = cameraObject[incorrectImageSideOverlap];
            cameraObject.remove(incorrectImageSideOverlap);
        }

        QList<JsonHelper::KeyValidateInfo> cameraKeyInfoList = {
            { _jsonGroundResolutionKey,             QJsonValue::Double, true },
            { _jsonFrontalOverlapKey,               QJsonValue::Double, true },
            { _jsonSideOverlapKey,                  QJsonValue::Double, true },
            { _jsonCameraSensorWidthKey,            QJsonValue::Double, true },
            { _jsonCameraSensorHeightKey,           QJsonValue::Double, true },
            { _jsonCameraResolutionWidthKey,        QJsonValue::Double, true },
            { _jsonCameraResolutionHeightKey,       QJsonValue::Double, true },
            { _jsonCameraFocalLengthKey,            QJsonValue::Double, true },
            { _jsonCameraNameKey,                   QJsonValue::String, true },
            { _jsonCameraOrientationLandscapeKey,   QJsonValue::Bool,   true },
        };
        if (!JsonHelper::validateKeys(cameraObject, cameraKeyInfoList, errorString)) {
            return false;
        }

        _cameraFact.setRawValue(cameraObject[_jsonCameraNameKey].toString());
        _cameraOrientationLandscapeFact.setRawValue(cameraObject[_jsonCameraOrientationLandscapeKey].toBool(true));

        _groundResolutionFact.setRawValue       (cameraObject[_jsonGroundResolutionKey].toDouble());
        _frontalOverlapFact.setRawValue         (cameraObject[_jsonFrontalOverlapKey].toInt());
        _sideOverlapFact.setRawValue            (cameraObject[_jsonSideOverlapKey].toInt());
        _cameraSensorWidthFact.setRawValue      (cameraObject[_jsonCameraSensorWidthKey].toDouble());
        _cameraSensorHeightFact.setRawValue     (cameraObject[_jsonCameraSensorHeightKey].toDouble());
        _cameraResolutionWidthFact.setRawValue  (cameraObject[_jsonCameraResolutionWidthKey].toDouble());
        _cameraResolutionHeightFact.setRawValue (cameraObject[_jsonCameraResolutionHeightKey].toDouble());
        _cameraFocalLengthFact.setRawValue      (cameraObject[_jsonCameraFocalLengthKey].toDouble());
    }

    // Polygon shape
    /// Load a polygon from json
    ///     @param json Json object to load from
    ///     @param required true: no polygon in object will generate error
    ///     @param errorString Error string if return is false
    /// @return true: success, false: failure (errorString set)
    if (!_mapPolygon.loadFromJson(v2Object, true /* required */, errorString)) {
        _mapPolygon.clear();
        return false;
    }

    _ignoreRecalc = false;
    _generateGrid();

    return true;
}

double SurveyMissionItem::greatestDistanceTo(const QGeoCoordinate &other) const
{
    double greatestDistance = 0.0;
    for (int i=0; i<_simpleGridPoints.count(); i++) {
        QGeoCoordinate currentCoord = _simpleGridPoints[i].value<QGeoCoordinate>();
        double distance = currentCoord.distanceTo(other);
        if (distance > greatestDistance) {
            greatestDistance = distance;
        }
    }
    return greatestDistance;
}

void SurveyMissionItem::_setExitCoordinate(const QGeoCoordinate& coordinate)
{
    if (_exitCoordinate != coordinate) {
        _exitCoordinate = coordinate;
        emit exitCoordinateChanged(coordinate);
    }
}

bool SurveyMissionItem::specifiesCoordinate(void) const
{
    return _mapPolygon.count() > 2;
}

void _calcCameraShots()
{

}

void SurveyMissionItem::_convertTransectToGeo(const QList<QList<QPointF>>& transectSegmentsNED, const QGeoCoordinate& tangentOrigin, QList<QList<QGeoCoordinate>>& transectSegmentsGeo)
{
    transectSegmentsGeo.clear();

    for (int i=0; i<transectSegmentsNED.count(); i++) {
        QList<QGeoCoordinate>   transectCoords;
        const QList<QPointF>&   transectPoints = transectSegmentsNED[i];

        for (int j=0; j<transectPoints.count(); j++) {
            QGeoCoordinate coord;
            const QPointF& point = transectPoints[j];
            convertNedToGeo(point.y(), point.x(), 0, tangentOrigin, &coord);
            transectCoords.append(coord);
        }
        transectSegmentsGeo.append(transectCoords);
    }
}

/// Reorders the transects such that the first transect is the shortest distance to the specified coordinate
/// and the first point within that transect is the shortest distance to the specified coordinate.
///     @param distanceCoord Coordinate to measure distance against
///     @param transects Transects to test and reorder
void SurveyMissionItem::_optimizeTransectsForShortestDistance(const QGeoCoordinate& distanceCoord, QList<QList<QGeoCoordinate>>& transects)
{
    double rgTransectDistance[4];
    rgTransectDistance[0] = transects.first().first().distanceTo(distanceCoord);
    rgTransectDistance[1] = transects.first().last().distanceTo(distanceCoord);
    rgTransectDistance[2] = transects.last().first().distanceTo(distanceCoord);
    rgTransectDistance[3] = transects.last().last().distanceTo(distanceCoord);

    int shortestIndex = 0;
    double shortestDistance = rgTransectDistance[0];
    for (int i=1; i<3; i++) {
        if (rgTransectDistance[i] < shortestDistance) {
            shortestIndex = i;
            shortestDistance = rgTransectDistance[i];
        }
    }

    if (shortestIndex > 1) {
        // We need to reverse the order of segments
        QList<QList<QGeoCoordinate>> rgReversedTransects;
        for (int i=transects.count() - 1; i>=0; i--) {
            rgReversedTransects.append(transects[i]);
        }
        transects = rgReversedTransects;
    }
    if (shortestIndex & 1) {
        // We need to reverse the points within each segment
        for (int i=0; i<transects.count(); i++) {
            QList<QGeoCoordinate> rgReversedCoords;
            QList<QGeoCoordinate>& rgOriginalCoords = transects[i];
            for (int j=rgOriginalCoords.count()-1; j>=0; j--) {
                rgReversedCoords.append(rgOriginalCoords[j]);
            }
            transects[i] = rgReversedCoords;
        }
    }
}

void SurveyMissionItem::_appendGridPointsFromTransects(QList<QList<QGeoCoordinate>>& rgTransectSegments)
{
    for (int i=0; i<rgTransectSegments.count(); i++) {
        _simpleGridPoints.append(QVariant::fromValue(rgTransectSegments[i].first()));
        _simpleGridPoints.append(QVariant::fromValue(rgTransectSegments[i].last()));
    }
}

qreal SurveyMissionItem::_ccw(QPointF pt1, QPointF pt2, QPointF pt3)
{
    return (pt2.x()-pt1.x())*(pt3.y()-pt1.y()) - (pt2.y()-pt1.y())*(pt3.x()-pt1.x());
}

qreal SurveyMissionItem::_dp(QPointF pt1, QPointF pt2)
{
    return (pt2.x()-pt1.x())/qSqrt((pt2.x()-pt1.x())*(pt2.x()-pt1.x()) + (pt2.y()-pt1.y())*(pt2.y()-pt1.y()));
}

void SurveyMissionItem::_swapPoints(QList<QPointF>& points, int index1, int index2)
{
    QPointF temp = points[index1];
    points[index1] = points[index2];
    points[index2] = temp;
}

QList<QPointF> SurveyMissionItem::_convexPolygon(const QList<QPointF>& polygon)
{
    // We use the Graham scan algorithem to convert the possibly concave polygon to a convex polygon
    // https://en.wikipedia.org/wiki/Graham_scan

    QList<QPointF> workPolygon(polygon);

    // First point must be lowest y-coordinate point
    for (int i=1; i<workPolygon.count(); i++) {
        if (workPolygon[i].y() < workPolygon[0].y()) {
            _swapPoints(workPolygon, i, 0);
        }
    }

    // Sort the points by angle with first point
    for (int i=1; i<workPolygon.count(); i++) {
        qreal angle = _dp(workPolygon[0], workPolygon[i]);
        for (int j=i+1; j<workPolygon.count(); j++) {
            if (_dp(workPolygon[0], workPolygon[j]) > angle) {
                _swapPoints(workPolygon, i, j);
                angle = _dp(workPolygon[0], workPolygon[j]);
            }
        }
    }

    // Perform the the Graham scan

    workPolygon.insert(0, workPolygon.last());  // Sentinel for algo stop
    int convexCount = 1;                        // Number of points on the convex hull.

    for (int i=2; i<=polygon.count(); i++) {
        while (_ccw(workPolygon[convexCount-1], workPolygon[convexCount], workPolygon[i]) <= 0) {
            if (convexCount > 1) {
                convexCount -= 1;
            } else if (i == polygon.count()) {
                break;
            } else {
                i++;
            }
        }
        convexCount++;
        _swapPoints(workPolygon, convexCount, i);
    }

    return workPolygon.mid(1, convexCount);
}

void SurveyMissionItem::_generateGrid(void)
{
    if (_ignoreRecalc) {
        return;
    }

    if (_mapPolygon.count() < 3 || _gridSpacingFact.rawValue().toDouble() <= 0) {
        _clearInternal();
        return;
    }

    _simpleGridPoints.clear();
    _transectSegments.clear();
    _reflyTransectSegments.clear();

    QList<QPointF>          polygonPoints;
    QList<QList<QPointF>>   transectSegments;

    // Convert polygon to NED
    QGeoCoordinate tangentOrigin = _mapPolygon.pathModel().value<QGCQGeoCoordinate*>(0)->coordinate();
    qCDebug(SurveyMissionItemLog) << "Convert polygon to NED - tangentOrigin" << tangentOrigin;
    for (int i=0; i<_mapPolygon.count(); i++) {
        double y, x, down;
        QGeoCoordinate vertex = _mapPolygon.pathModel().value<QGCQGeoCoordinate*>(i)->coordinate();
        if (i == 0) {
            // This avoids a nan calculation that comes out of convertGeoToNed
            x = y = 0;
        } else {
            convertGeoToNed(vertex, tangentOrigin, &y, &x, &down);
        }
        polygonPoints += QPointF(x, y);
        qCDebug(SurveyMissionItemLog) << "vertex:x:y" << vertex << polygonPoints.last().x() << polygonPoints.last().y();
    }

    polygonPoints = _convexPolygon(polygonPoints);

    double coveredArea = 0.0;
    for (int i=0; i<polygonPoints.count(); i++) {
        if (i != 0) {
            coveredArea += polygonPoints[i - 1].x() * polygonPoints[i].y() - polygonPoints[i].x() * polygonPoints[i -1].y();
        } else {
            coveredArea += polygonPoints.last().x() * polygonPoints[i].y() - polygonPoints[i].x() * polygonPoints.last().y();
        }
    }
    _setCoveredArea(0.5 * fabs(coveredArea));

    // Generate grid
    int cameraShots = 0;
    cameraShots += _gridGenerator(polygonPoints, transectSegments, false /* refly */);
    _convertTransectToGeo(transectSegments, tangentOrigin, _transectSegments);
    //_optimizeTransectsForShortestDistance(?, _transectSegments);
    _appendGridPointsFromTransects(_transectSegments);
    qDebug() << _transectSegments.count();
    if (_refly90Degrees) {
        QVariantList reflyPointsGeo;

        transectSegments.clear();
        cameraShots += _gridGenerator(polygonPoints, transectSegments, true /* refly */);
        _convertTransectToGeo(transectSegments, tangentOrigin, _reflyTransectSegments);
        _optimizeTransectsForShortestDistance(_transectSegments.last().last(), _reflyTransectSegments);
        _appendGridPointsFromTransects(_reflyTransectSegments);
    }

    // Calc survey distance
    double surveyDistance = 0.0;
    for (int i=1; i<_simpleGridPoints.count(); i++) {
        QGeoCoordinate coord1 = _simpleGridPoints[i-1].value<QGeoCoordinate>();
        QGeoCoordinate coord2 = _simpleGridPoints[i].value<QGeoCoordinate>();
        surveyDistance += coord1.distanceTo(coord2);
    }
    _setSurveyDistance(surveyDistance);

    if (cameraShots == 0 && _triggerCamera()) {
        cameraShots = (int)ceil(surveyDistance / _triggerDistance());
    }
    _setCameraShots(cameraShots);

    emit gridPointsChanged();

    // Determine command count for lastSequenceNumber

    _missionCommandCount= 0;
    for (int i=0; i<_transectSegments.count(); i++) {
        const QList<QGeoCoordinate>& transectSegment = _transectSegments[i];

        _missionCommandCount += transectSegment.count();    // This accounts for all waypoints
        if (_hoverAndCaptureEnabled()) {
            // Internal camera trigger points are entry point, plus all points before exit point
            _missionCommandCount += transectSegment.count() - (_hasTurnaround() ? 2 : 0) - 1;
        } else if (_triggerCamera()) {
            _missionCommandCount += 2;                          // Camera on/off at entry/exit
        }
    }
    emit lastSequenceNumberChanged(lastSequenceNumber());

    // Set exit coordinate
    if (_simpleGridPoints.count()) {
        QGeoCoordinate coordinate = _simpleGridPoints.first().value<QGeoCoordinate>();
        coordinate.setAltitude(_gridAltitudeFact.rawValue().toDouble());
        setCoordinate(coordinate);
        QGeoCoordinate exitCoordinate = _simpleGridPoints.last().value<QGeoCoordinate>();
        exitCoordinate.setAltitude(_gridAltitudeFact.rawValue().toDouble());
        _setExitCoordinate(exitCoordinate);
    }

    setDirty(true);
}

void SurveyMissionItem::_updateCoordinateAltitude(void)
{
    _coordinate.setAltitude(_gridAltitudeFact.rawValue().toDouble());
    _exitCoordinate.setAltitude(_gridAltitudeFact.rawValue().toDouble());
    emit coordinateChanged(_coordinate);
    emit exitCoordinateChanged(_exitCoordinate);
    setDirty(true);
}

QPointF SurveyMissionItem::_rotatePoint(const QPointF& point, const QPointF& origin, double angle)
{
    QPointF rotated;
    double radians = (M_PI / 180.0) * angle;

    rotated.setX(((point.x() - origin.x()) * cos(radians)) - ((point.y() - origin.y()) * sin(radians)) + origin.x());
    rotated.setY(((point.x() - origin.x()) * sin(radians)) + ((point.y() - origin.y()) * cos(radians)) + origin.y());

    return rotated;
}

void SurveyMissionItem::_intersectLinesWithRect(const QList<QLineF>& lineList, const QRectF& boundRect, QList<QLineF>& resultLines)
{
    QLineF topLine      (boundRect.topLeft(),       boundRect.topRight());
    QLineF bottomLine   (boundRect.bottomLeft(),    boundRect.bottomRight());
    QLineF leftLine     (boundRect.topLeft(),       boundRect.bottomLeft());
    QLineF rightLine    (boundRect.topRight(),      boundRect.bottomRight());

    for (int i=0; i<lineList.count(); i++) {
        QPointF intersectPoint;
        QLineF intersectLine;
        const QLineF& line = lineList[i];

        int foundCount = 0;
        if (line.intersect(topLine, &intersectPoint) == QLineF::BoundedIntersection) {
            intersectLine.setP1(intersectPoint);
            foundCount++;
        }
        if (line.intersect(rightLine, &intersectPoint) == QLineF::BoundedIntersection) {
            if (foundCount == 0) {
                intersectLine.setP1(intersectPoint);
            } else {
                if (foundCount != 1) {
                    qWarning() << "Found more than two intersecting points";
                }
                intersectLine.setP2(intersectPoint);
            }
            foundCount++;
        }
        if (line.intersect(bottomLine, &intersectPoint) == QLineF::BoundedIntersection) {
            if (foundCount == 0) {
                intersectLine.setP1(intersectPoint);
            } else {
                if (foundCount != 1) {
                    qWarning() << "Found more than two intersecting points";
                }
                intersectLine.setP2(intersectPoint);
            }
            foundCount++;
        }
        if (line.intersect(leftLine, &intersectPoint) == QLineF::BoundedIntersection) {
            if (foundCount == 0) {
                intersectLine.setP1(intersectPoint);
            } else {
                if (foundCount != 1) {
                    qWarning() << "Found more than two intersecting points";
                }
                intersectLine.setP2(intersectPoint);
            }
            foundCount++;
        }

        if (foundCount == 2) {
            resultLines += intersectLine;
        }
    }
}

void SurveyMissionItem::_intersectLinesWithPolygon(const QList<QLineF>& lineList, const QPolygonF& polygon, QList<QLineF>& resultLines)
{
    for (int i=0; i<lineList.count(); i++) {
        int foundCount = 0;
        QLineF intersectLine;
        const QLineF& line = lineList[i];

        for (int j=0; j<polygon.count()-1; j++) {
            QPointF intersectPoint;
            QLineF polygonLine = QLineF(polygon[j], polygon[j+1]);
            if (line.intersect(polygonLine, &intersectPoint) == QLineF::BoundedIntersection) {
                if (foundCount == 0) {
                    foundCount++;
                    intersectLine.setP1(intersectPoint);
                } else {
                    foundCount++;
                    intersectLine.setP2(intersectPoint);
                    break;
                }
            }
        }

        if (foundCount == 2) {
            resultLines += intersectLine;
        }
    }
}

/// Adjust the line segments such that they are all going the same direction with respect to going from P1->P2
void SurveyMissionItem::_adjustLineDirection(const QList<QLineF>& lineList, QList<QLineF>& resultLines)
{
    qreal firstAngle = 0;
    for (int i=0; i<lineList.count(); i++) {
        const QLineF& line = lineList[i];
        QLineF adjustedLine;

        if (i == 0) {
            firstAngle = line.angle();
        }

        if (qAbs(line.angle() - firstAngle) > 1.0) {
            adjustedLine.setP1(line.p2());
            adjustedLine.setP2(line.p1());
        } else {
            adjustedLine = line;
        }

        resultLines += adjustedLine;
    }
}

int SurveyMissionItem::_gridGenerator(const QList<QPointF>& polygonPoints,  QList<QList<QPointF>>& transectSegments, bool refly)
{
    int cameraShots = 0;

    double gridAngle = _gridAngleFact.rawValue().toDouble() + (refly ? 90 : 0);
    double gridSpacing = _gridSpacingFact.rawValue().toDouble();

    qCDebug(SurveyMissionItemLog) << "SurveyMissionItem::_gridGenerator gridSpacing:gridAngle:refly" << gridSpacing << gridAngle << refly;

    transectSegments.clear();

    // Convert polygon to bounding rect

    qCDebug(SurveyMissionItemLog) << "Polygon";
    QPolygonF polygon;
    for (int i=0; i<polygonPoints.count(); i++) {
        qCDebug(SurveyMissionItemLog) << polygonPoints[i];
        polygon << polygonPoints[i];
    }
    polygon << polygonPoints[0];
    QRectF smallBoundRect = polygon.boundingRect();
    QPointF center = smallBoundRect.center();
    qCDebug(SurveyMissionItemLog) << "Bounding rect" << smallBoundRect.topLeft().x() << smallBoundRect.topLeft().y() << smallBoundRect.bottomRight().x() << smallBoundRect.bottomRight().y();

    // Rotate the bounding rect around it's center to generate the larger bounding rect
    QPolygonF boundPolygon;
    boundPolygon << _rotatePoint(smallBoundRect.topLeft(),      center, gridAngle);
    boundPolygon << _rotatePoint(smallBoundRect.topRight(),     center, gridAngle);
    boundPolygon << _rotatePoint(smallBoundRect.bottomRight(),  center, gridAngle);
    boundPolygon << _rotatePoint(smallBoundRect.bottomLeft(),   center, gridAngle);
    boundPolygon << boundPolygon[0];
    QRectF largeBoundRect = boundPolygon.boundingRect();
    qCDebug(SurveyMissionItemLog) << "Rotated bounding rect" << largeBoundRect.topLeft().x() << largeBoundRect.topLeft().y() << largeBoundRect.bottomRight().x() << largeBoundRect.bottomRight().y();

    // Create set of rotated parallel lines within the expanded bounding rect. Make the lines larger than the
    // bounding box to guarantee intersection.
    QList<QLineF> lineList;
    float x = largeBoundRect.topLeft().x() - (gridSpacing / 2);
    while (x < largeBoundRect.bottomRight().x()) {
        float yTop =    largeBoundRect.topLeft().y() - 100.0;
        float yBottom = largeBoundRect.bottomRight().y() + 100.0;

        lineList += QLineF(_rotatePoint(QPointF(x, yTop), center, gridAngle), _rotatePoint(QPointF(x, yBottom), center, gridAngle));
        qCDebug(SurveyMissionItemLog) << "line(" << lineList.last().x1() << ", " << lineList.last().y1() << ")-(" << lineList.last().x2() <<", " << lineList.last().y2() << ")";

        x += gridSpacing;
    }

    // Now intersect the lines with the polygon
    QList<QLineF> intersectLines;
#if 1
    _intersectLinesWithPolygon(lineList, polygon, intersectLines);
#else
    // This is handy for debugging grid problems, not for release
    intersectLines = lineList;
#endif

    // Make sure all lines are going to same direction. Polygon intersection leads to line which
    // can be in varied directions depending on the order of the intesecting sides.
    QList<QLineF> resultLines;
    _adjustLineDirection(intersectLines, resultLines);

    // Calc camera shots here if there are no images in turnaround
    if (_triggerCamera() && !_imagesEverywhere()) {
        for (int i=0; i<resultLines.count(); i++) {
            cameraShots += (int)ceil(resultLines[i].length() / _triggerDistance());
        }
    }

    // Turn into a path
    for (int i=0; i<resultLines.count(); i++) {
        QLineF          transectLine;
        QList<QPointF>  transectPoints;
        const QLineF&   line = resultLines[i];

        float turnaroundPosition = _turnaroundDistance() / line.length();

        if (i & 1) {
            transectLine = QLineF(line.p2(), line.p1());
        } else {
            transectLine = QLineF(line.p1(), line.p2());
        }

        // Build the points along the transect

        if (_hasTurnaround()) {
            transectPoints.append(transectLine.pointAt(-turnaroundPosition));
        }

        // Polygon entry point
        transectPoints.append(transectLine.p1());

        // For hover and capture we need points for each camera location
        if (_triggerCamera() && _hoverAndCaptureEnabled()) {
            if (_triggerDistance() < transectLine.length()) {
                int innerPoints = floor(transectLine.length() / _triggerDistance());
                qCDebug(SurveyMissionItemLog) << "innerPoints" << innerPoints;
                float transectPositionIncrement = _triggerDistance() / transectLine.length();
                for (int i=0; i<innerPoints; i++) {
                    transectPoints.append(transectLine.pointAt(transectPositionIncrement * (i + 1)));
                }
            }
        }

        // Polygon exit point
        transectPoints.append(transectLine.p2());

        if (_hasTurnaround()) {
            transectPoints.append(transectLine.pointAt(1 + turnaroundPosition));
        }

        transectSegments.append(transectPoints);
    }

    return cameraShots;
}

int SurveyMissionItem::_appendWaypointToMission(QList<MissionItem*>& items, int seqNum, QGeoCoordinate& coord, CameraTriggerCode cameraTrigger, QObject* missionItemParent)
{
    double  altitude =          _gridAltitudeFact.rawValue().toDouble();
    bool    altitudeRelative =  _gridAltitudeRelativeFact.rawValue().toBool();

    qCDebug(SurveyMissionItemLog) << "_appendWaypointToMission seq:trigger" << seqNum << (cameraTrigger != CameraTriggerNone);

    MissionItem* item = new MissionItem(seqNum++,
                                        MAV_CMD_NAV_WAYPOINT,
                                        altitudeRelative ? MAV_FRAME_GLOBAL_RELATIVE_ALT : MAV_FRAME_GLOBAL,
                                        cameraTrigger == CameraTriggerHoverAndCapture ? 1 : 0,  // Hold time (1 second for hover and capture to settle vehicle before image is taken)
                                        0.0, 0.0,
                                        std::numeric_limits<double>::quiet_NaN(),   // Yaw unchanged
                                        coord.latitude(),
                                        coord.longitude(),
                                        altitude,
                                        true,                                       // autoContinue
                                        false,                                      // isCurrentItem
                                        missionItemParent);
    items.append(item);

    switch (cameraTrigger) {
    case CameraTriggerOff:
    case CameraTriggerOn:
        item = new MissionItem(seqNum++,
                               MAV_CMD_DO_SET_CAM_TRIGG_DIST,
                               MAV_FRAME_MISSION,
                               cameraTrigger == CameraTriggerOn ? _triggerDistance() : 0,
                               0, 0, 0, 0, 0, 0,               // param 2-7 unused
                               true,                           // autoContinue
                               false,                          // isCurrentItem
                               missionItemParent);
        items.append(item);
        break;
    case CameraTriggerHoverAndCapture:
        item = new MissionItem(seqNum++,
                               MAV_CMD_IMAGE_START_CAPTURE,
                               MAV_FRAME_MISSION,
                               0,                  // Interval
                               1,                  // Take 1 photo
                               -1,                 // Mav resolution
                               0, 0,               // Param 4-5 unused
                               0,                  // Camera ID
                               7,                  // Param 7 unused
                               true,               // autoContinue
                               false,              // isCurrentItem
                               missionItemParent);
        items.append(item);
        item = new MissionItem(seqNum++,
                               MAV_CMD_NAV_DELAY,
                               MAV_FRAME_MISSION,
                               0.5,                // Delay in seconds, give some time for image to be taken
                               -1, -1, -1,         // No time
                               0, 0, 0,            // Param 5-7 unused
                               true,               // autoContinue
                               false,              // isCurrentItem
                               missionItemParent);
        items.append(item);
    default:
        break;
    }

    return seqNum;
}

bool SurveyMissionItem::_nextTransectCoord(const QList<QGeoCoordinate>& transectPoints, int pointIndex, QGeoCoordinate& coord)
{
    if (pointIndex > transectPoints.count()) {
        qWarning() << "Bad grid generation";
        return false;
    }

    coord = transectPoints[pointIndex];
    return true;
}

/// Appends the mission items for the survey
///     @param items Mission items are appended to this list
///     @param missionItemParent Parent object for newly created MissionItem objects
///     @param seqNum[in,out] Sequence number to start from
///     @param hasRefly true: misison has a refly section
///     @param buildRefly: true: build the refly section, false: build the first section
/// @return false: Generation failed
bool SurveyMissionItem::_appendMissionItemsWorker(QList<MissionItem*>& items, QObject* missionItemParent, int& seqNum, bool hasRefly, bool buildRefly)
{
    qCDebug(SurveyMissionItemLog) << "hasTurnaround:triggerCamera:hoverAndCapture:imagesEverywhere:hasRefly:buildRefly" << _hasTurnaround() << _triggerCamera() << _hoverAndCaptureEnabled() << _imagesEverywhere() << hasRefly << buildRefly;

    QList<QList<QGeoCoordinate>>& transectSegments = buildRefly ? _reflyTransectSegments : _transectSegments;

    if (!buildRefly && _imagesEverywhere()) {
        // We are taking images in turnaround, so we start command once at beginning
        MissionItem* item = new MissionItem(seqNum++,
                                            MAV_CMD_DO_SET_CAM_TRIGG_DIST,
                                            MAV_FRAME_MISSION,
                                            _triggerDistance(),
                                            0, 0, 0, 0, 0, 0,       // param 2-7 unused
                                            true,                   // autoContinue
                                            false,                  // isCurrentItem
                                            missionItemParent);
        items.append(item);
    }

    for (int segmentIndex=0; segmentIndex<transectSegments.count(); segmentIndex++) {
        int pointIndex = 0;
        QGeoCoordinate coord;
        CameraTriggerCode cameraTrigger;
        const QList<QGeoCoordinate>& segment = transectSegments[segmentIndex];

        qCDebug(SurveyMissionItemLog) << "segment.count" << segment.count();

        if (_hasTurnaround()) {
            // Add entry turnaround point
            if (!_nextTransectCoord(segment, pointIndex++, coord)) {
                return false;
            }
            seqNum = _appendWaypointToMission(items, seqNum, coord, CameraTriggerNone, missionItemParent);
        }

        // Add polygon entry point
        if (!_nextTransectCoord(segment, pointIndex++, coord)) {
            return false;
        }
        cameraTrigger = _imagesEverywhere() || !_triggerCamera() ? CameraTriggerNone : (_hoverAndCaptureEnabled() ? CameraTriggerHoverAndCapture : CameraTriggerOn);
        seqNum = _appendWaypointToMission(items, seqNum, coord, cameraTrigger, missionItemParent);

        // Add internal hover and capture points
        if (_hoverAndCaptureEnabled()) {
            int lastHoverAndCaptureIndex = segment.count() - 1 - (_hasTurnaround() ? 1 : 0);
            qCDebug(SurveyMissionItemLog) << "lastHoverAndCaptureIndex" << lastHoverAndCaptureIndex;
            for (; pointIndex < lastHoverAndCaptureIndex; pointIndex++) {
                if (!_nextTransectCoord(segment, pointIndex, coord)) {
                    return false;
                }
                seqNum = _appendWaypointToMission(items, seqNum, coord, CameraTriggerHoverAndCapture, missionItemParent);
            }
        }

        // Add polygon exit point
        if (!_nextTransectCoord(segment, pointIndex++, coord)) {
            return false;
        }
        cameraTrigger = _imagesEverywhere() || !_triggerCamera() ? CameraTriggerNone : (_hoverAndCaptureEnabled() ? CameraTriggerNone : CameraTriggerOff);
        seqNum = _appendWaypointToMission(items, seqNum, coord, cameraTrigger, missionItemParent);

        if (_hasTurnaround()) {
            // Add exit turnaround point
            if (!_nextTransectCoord(segment, pointIndex++, coord)) {
                return false;
            }
            seqNum = _appendWaypointToMission(items, seqNum, coord, CameraTriggerNone, missionItemParent);
        }

        qCDebug(SurveyMissionItemLog) << "last PointIndex" << pointIndex;
    }

    if (((hasRefly && buildRefly) || !hasRefly) && _imagesEverywhere()) {
        // Turn off camera at end of survey
        MissionItem* item = new MissionItem(seqNum++,
                                            MAV_CMD_DO_SET_CAM_TRIGG_DIST,
                                            MAV_FRAME_MISSION,
                                            0.0,                    // trigger distance (off)
                                            0, 0, 0, 0, 0, 0,       // param 2-7 unused
                                            true,                   // autoContinue
                                            false,                  // isCurrentItem
                                            missionItemParent);
        items.append(item);
    }

    return true;
}

void SurveyMissionItem::appendMissionItems(QList<MissionItem*>& items, QObject* missionItemParent)
{
    int seqNum = _sequenceNumber;

    if (!_appendMissionItemsWorker(items, missionItemParent, seqNum, _refly90Degrees, false /* buildRefly */)) {
        return;
    }

    if (_refly90Degrees) {
        _appendMissionItemsWorker(items, missionItemParent, seqNum, _refly90Degrees, true /* buildRefly */);
    }
}

int SurveyMissionItem::cameraShots(void) const
{
    return _triggerCamera() ? _cameraShots : 0;
}

void SurveyMissionItem::_cameraValueChanged(void)
{
    emit cameraValueChanged();
}

double SurveyMissionItem::timeBetweenShots(void) const
{
    return _cruiseSpeed == 0 ? 0 : _triggerDistance() / _cruiseSpeed;
}

void SurveyMissionItem::setMissionFlightStatus  (MissionController::MissionFlightStatus_t& missionFlightStatus)
{
    ComplexMissionItem::setMissionFlightStatus(missionFlightStatus);
    if (!qFuzzyCompare(_cruiseSpeed, missionFlightStatus.vehicleSpeed)) {
        _cruiseSpeed = missionFlightStatus.vehicleSpeed;
        emit timeBetweenShotsChanged();
    }
}

void SurveyMissionItem::_setDirty(void)
{
    setDirty(true);
}

bool SurveyMissionItem::hoverAndCaptureAllowed(void) const
{
    return _vehicle->multiRotor() || _vehicle->vtol();
}

double SurveyMissionItem::_triggerDistance(void) const {
    return _cameraTriggerDistanceFact.rawValue().toDouble();
}

bool SurveyMissionItem::_triggerCamera(void) const
{
    return _triggerDistance() > 0;
}

bool SurveyMissionItem::_imagesEverywhere(void) const
{
    return _triggerCamera() && _cameraTriggerInTurnaroundFact.rawValue().toBool();
}

bool SurveyMissionItem::_hoverAndCaptureEnabled(void) const
{
    return hoverAndCaptureAllowed() && !_imagesEverywhere() && _triggerCamera() && _hoverAndCaptureFact.rawValue().toBool();
}

bool SurveyMissionItem::_hasTurnaround(void) const
{
    return _turnaroundDistance() > 0;
}

double SurveyMissionItem::_turnaroundDistance(void) const
{
    return _turnaroundDistFact.rawValue().toDouble();
}

void SurveyMissionItem::applyNewAltitude(double newAltitude)
{
    _gridAltitudeFact.setRawValue(newAltitude);
}

void SurveyMissionItem::setRefly90Degrees(bool refly90Degrees)
{
    if (refly90Degrees != _refly90Degrees) {
        _refly90Degrees = refly90Degrees;
        emit refly90DegreesChanged(refly90Degrees);
    }
}

void SurveyMissionItem::_polygonDirtyChanged(bool dirty)
{
    if (dirty) {
        setDirty(true);
    }
}