Newer
Older
MAV_CMD_COMPONENT_ARM_DISARM,
true, // show error if fails
armed ? 1.0f : 0.0f);
}
bool Vehicle::flightModeSetAvailable(void)
{
return _firmwarePlugin->isCapable(this, FirmwarePlugin::SetFlightModeCapability);
}
QStringList Vehicle::flightModes(void)
{
{
return _firmwarePlugin->flightMode(_base_mode, _custom_mode);
}
void Vehicle::setFlightMode(const QString& flightMode)
{
uint8_t base_mode;
uint32_t custom_mode;
if (_firmwarePlugin->setFlightMode(flightMode, &base_mode, &custom_mode)) {
// setFlightMode will only set MAV_MODE_FLAG_CUSTOM_MODE_ENABLED in base_mode, we need to move back in the existing
// states.
uint8_t newBaseMode = _base_mode & ~MAV_MODE_FLAG_DECODE_POSITION_CUSTOM_MODE;
newBaseMode |= base_mode;
mavlink_message_t msg;
mavlink_msg_set_mode_pack_chan(_mavlink->getSystemId(),
_mavlink->getComponentId(),
priorityLink()->mavlinkChannel(),
&msg,
id(),
newBaseMode,
custom_mode);
sendMessageOnLink(priorityLink(), msg);
qWarning() << "FirmwarePlugin::setFlightMode failed, flightMode:" << flightMode;
}
}
bool Vehicle::hilMode(void)
{
return _base_mode & MAV_MODE_FLAG_HIL_ENABLED;
}
void Vehicle::setHilMode(bool hilMode)
{
mavlink_message_t msg;
uint8_t newBaseMode = _base_mode & ~MAV_MODE_FLAG_DECODE_POSITION_HIL;
if (hilMode) {
newBaseMode |= MAV_MODE_FLAG_HIL_ENABLED;
}
mavlink_msg_set_mode_pack_chan(_mavlink->getSystemId(),
_mavlink->getComponentId(),
priorityLink()->mavlinkChannel(),
&msg,
id(),
newBaseMode,
_custom_mode);
sendMessageOnLink(priorityLink(), msg);
void Vehicle::requestDataStream(MAV_DATA_STREAM stream, uint16_t rate, bool sendMultiple)
{
mavlink_message_t msg;
mavlink_request_data_stream_t dataStream;
dataStream.req_stream_id = stream;
dataStream.req_message_rate = rate;
dataStream.start_stop = 1; // start
dataStream.target_system = id();
dataStream.target_component = _defaultComponentId;
mavlink_msg_request_data_stream_encode_chan(_mavlink->getSystemId(),
_mavlink->getComponentId(),
priorityLink()->mavlinkChannel(),
&msg,
&dataStream);
if (sendMultiple) {
// We use sendMessageMultiple since we really want these to make it to the vehicle
sendMessageMultiple(msg);
} else {
sendMessageOnLink(priorityLink(), msg);
}
void Vehicle::_sendMessageMultipleNext(void)
{
if (_nextSendMessageMultipleIndex < _sendMessageMultipleList.count()) {
qCDebug(VehicleLog) << "_sendMessageMultipleNext:" << _sendMessageMultipleList[_nextSendMessageMultipleIndex].message.msgid;
sendMessageOnLink(priorityLink(), _sendMessageMultipleList[_nextSendMessageMultipleIndex].message);
if (--_sendMessageMultipleList[_nextSendMessageMultipleIndex].retryCount <= 0) {
_sendMessageMultipleList.removeAt(_nextSendMessageMultipleIndex);
} else {
_nextSendMessageMultipleIndex++;
}
}
if (_nextSendMessageMultipleIndex >= _sendMessageMultipleList.count()) {
_nextSendMessageMultipleIndex = 0;
}
}
void Vehicle::sendMessageMultiple(mavlink_message_t message)
{
SendMessageMultipleInfo_t info;
info.message = message;
info.retryCount = _sendMessageMultipleRetries;
_sendMessageMultipleList.append(info);
}
void Vehicle::_missionManagerError(int errorCode, const QString& errorMsg)
{
Q_UNUSED(errorCode);
qgcApp()->showMessage(tr("Mission transfer failed. Retry transfer. Error: %1").arg(errorMsg));
void Vehicle::_geoFenceManagerError(int errorCode, const QString& errorMsg)
{
Q_UNUSED(errorCode);
qgcApp()->showMessage(tr("GeoFence transfer failed. Retry transfer. Error: %1").arg(errorMsg));
}
void Vehicle::_rallyPointManagerError(int errorCode, const QString& errorMsg)
{
Q_UNUSED(errorCode);
qgcApp()->showMessage(tr("Rally Point transfer failed. Retry transfer. Error: %1").arg(errorMsg));
void Vehicle::_addNewMapTrajectoryPoint(void)
{
if (_mapTrajectoryHaveFirstCoordinate) {
// Keep three minutes of trajectory on mobile due to perf impact of lines
#ifdef __mobile__
if (_mapTrajectoryList.count() * _mapTrajectoryMsecsBetweenPoints > 3 * 1000 * 60) {
_mapTrajectoryList.removeAt(0)->deleteLater();
}
_mapTrajectoryList.append(new CoordinateVector(_mapTrajectoryLastCoordinate, _coordinate, this));
_flightDistanceFact.setRawValue(_flightDistanceFact.rawValue().toDouble() + _mapTrajectoryLastCoordinate.distanceTo(_coordinate));
}
_mapTrajectoryHaveFirstCoordinate = true;
_mapTrajectoryLastCoordinate = _coordinate;
_flightTimeFact.setRawValue((double)_flightTimer.elapsed() / 1000.0);
void Vehicle::_clearTrajectoryPoints(void)
{
_mapTrajectoryList.clearAndDeleteContents();
}
void Vehicle::_clearCameraTriggerPoints(void)
{
_cameraTriggerPoints.clearAndDeleteContents();
}
void Vehicle::_mapTrajectoryStart(void)
{
_mapTrajectoryHaveFirstCoordinate = false;
_clearTrajectoryPoints();
_flightDistanceFact.setRawValue(0);
}
void Vehicle::_mapTrajectoryStop()
{
_mapTrajectoryTimer.stop();
}
if (_missionManagerInitialRequestSent) {
return;
}
if (_parameterManager->parametersReady() && _vehicleCapabilitiesKnown) {
_missionManagerInitialRequestSent = true;
if (_settingsManager->appSettings()->autoLoadMissions()->rawValue().toBool()) {
QString missionAutoLoadDirPath = _settingsManager->appSettings()->missionSavePath();
if (!missionAutoLoadDirPath.isEmpty()) {
QDir missionAutoLoadDir(missionAutoLoadDirPath);
QString autoloadFilename = missionAutoLoadDir.absoluteFilePath(tr("AutoLoad%1.%2").arg(_id).arg(AppSettings::planFileExtension));
if (QFile(autoloadFilename).exists()) {
_initialPlanRequestComplete = true; // We aren't going to load from the vehicle, so we are done
PlanMasterController::sendPlanToVehicle(this, autoloadFilename);
return;
}
} else {
if (!_parameterManager->parametersReady()) {
qCDebug(VehicleLog) << "Delaying _startPlanRequest due to parameters not ready";
} else if (!_vehicleCapabilitiesKnown) {
qCDebug(VehicleLog) << "Delaying _startPlanRequest due to vehicle capabilities not known";
void Vehicle::_missionLoadComplete(void)
{
// After the initial mission request completes we ask for the geofence
if (!_geoFenceManagerInitialRequestSent) {
_geoFenceManagerInitialRequestSent = true;
if (_geoFenceManager->supported()) {
qCDebug(VehicleLog) << "_missionLoadComplete requesting GeoFence";
_geoFenceManager->loadFromVehicle();
} else {
qCDebug(VehicleLog) << "_missionLoadComplete GeoFence not supported skipping";
_geoFenceLoadComplete();
}
}
}
void Vehicle::_geoFenceLoadComplete(void)
{
// After geofence request completes we ask for the rally points
if (!_rallyPointManagerInitialRequestSent) {
_rallyPointManagerInitialRequestSent = true;
if (_rallyPointManager->supported()) {
qCDebug(VehicleLog) << "_missionLoadComplete requesting Rally Points";
_rallyPointManager->loadFromVehicle();
} else {
qCDebug(VehicleLog) << "_missionLoadComplete Rally Points not supported skipping";
_rallyPointLoadComplete();
}
}
}
void Vehicle::_rallyPointLoadComplete(void)
{
qCDebug(VehicleLog) << "_missionLoadComplete _initialPlanRequestComplete = true";
if (!_initialPlanRequestComplete) {
_initialPlanRequestComplete = true;
void Vehicle::_parametersReady(bool parametersReady)
{
if (parametersReady) {
// Vehicle is no longer communicating with us, disconnect all links
LinkManager* linkMgr = _toolbox->linkManager();
for (int i=0; i<_links.count(); i++) {
// FIXME: This linkInUse check is a hack fix for multiple vehicles on the same link.
// The real fix requires significant restructuring which will come later.
if (!_toolbox->multiVehicleManager()->linkInUse(_links[i], this)) {
linkMgr->disconnectLink(_links[i]);
}
void Vehicle::_imageReady(UASInterface*)
{
if(_uas)
{
QImage img = _uas->getImage();
_toolbox->imageProvider()->setImage(&img, _id);
_flowImageIndex++;
emit flowImageIndexChanged();
}
}
void Vehicle::_remoteControlRSSIChanged(uint8_t rssi)
{
if (_rcRSSIstore < 0 || _rcRSSIstore > 100) {
_rcRSSIstore = rssi;
}
// Low pass to git rid of jitter
_rcRSSIstore = (_rcRSSIstore * 0.9f) + ((float)rssi * 0.1);
uint8_t filteredRSSI = (uint8_t)ceil(_rcRSSIstore);
if(_rcRSSIstore < 0.1) {
filteredRSSI = 0;
}
if(_rcRSSI != filteredRSSI) {
_rcRSSI = filteredRSSI;
emit rcRSSIChanged(_rcRSSI);
}
}
void Vehicle::virtualTabletJoystickValue(double roll, double pitch, double yaw, double thrust)
{
// The following if statement prevents the virtualTabletJoystick from sending values if the standard joystick is enabled
if ( !_joystickEnabled ) {
_uas->setExternalControlSetpoint(roll, pitch, yaw, thrust, 0, JoystickModeRC);
}
void Vehicle::setConnectionLostEnabled(bool connectionLostEnabled)
{
if (_connectionLostEnabled != connectionLostEnabled) {
_connectionLostEnabled = connectionLostEnabled;
emit connectionLostEnabledChanged(_connectionLostEnabled);
}
}
void Vehicle::_connectionLostTimeout(void)
{
if (highLatencyLink()) {
// No connection timeout on high latency links
return;
}
if (_connectionLostEnabled && !_connectionLost) {
_connectionLost = true;
_heardFrom = false;
Lorenz Meier
committed
_maxProtoVersion = 0;
_say(QString(tr("%1 communication lost")).arg(_vehicleIdSpeech()));
Lorenz Meier
committed
// Reset link state
for (int i = 0; i < _links.length(); i++) {
_mavlink->resetMetadataForLink(_links.at(i));
}
}
}
void Vehicle::_connectionActive(void)
{
_connectionLostTimer.start();
if (_connectionLost) {
_connectionLost = false;
emit connectionLostChanged(false);
_say(QString(tr("%1 communication regained")).arg(_vehicleIdSpeech()));
Lorenz Meier
committed
// Re-negotiate protocol version for the link
sendMavCommand(MAV_COMP_ID_ALL, // Don't know default component id yet.
Lorenz Meier
committed
false, // No error shown if fails
_toolbox->audioOutput()->say(text.toLower());
bool Vehicle::fixedWing(void) const
{
return QGCMAVLink::isFixedWing(vehicleType());
return QGCMAVLink::isRover(vehicleType());
bool Vehicle::sub(void) const
{
return QGCMAVLink::isSub(vehicleType());
bool Vehicle::multiRotor(void) const
{
return QGCMAVLink::isMultiRotor(vehicleType());
return _firmwarePlugin->isVtol(this);
bool Vehicle::supportsThrottleModeCenterZero(void) const
{
return _firmwarePlugin->supportsThrottleModeCenterZero();
}
bool Vehicle::supportsNegativeThrust(void) const
{
return _firmwarePlugin->supportsNegativeThrust();
}
bool Vehicle::supportsRadio(void) const
{
return _firmwarePlugin->supportsRadio();
}
bool Vehicle::supportsJSButton(void) const
{
return _firmwarePlugin->supportsJSButton();
}
bool Vehicle::supportsMotorInterference(void) const
{
return _firmwarePlugin->supportsMotorInterference();
}
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
QString Vehicle::vehicleTypeName() const {
static QMap<int, QString> typeNames = {
{ MAV_TYPE_GENERIC, tr("Generic micro air vehicle" )},
{ MAV_TYPE_FIXED_WING, tr("Fixed wing aircraft")},
{ MAV_TYPE_QUADROTOR, tr("Quadrotor")},
{ MAV_TYPE_COAXIAL, tr("Coaxial helicopter")},
{ MAV_TYPE_HELICOPTER, tr("Normal helicopter with tail rotor.")},
{ MAV_TYPE_ANTENNA_TRACKER, tr("Ground installation")},
{ MAV_TYPE_GCS, tr("Operator control unit / ground control station")},
{ MAV_TYPE_AIRSHIP, tr("Airship, controlled")},
{ MAV_TYPE_FREE_BALLOON, tr("Free balloon, uncontrolled")},
{ MAV_TYPE_ROCKET, tr("Rocket")},
{ MAV_TYPE_GROUND_ROVER, tr("Ground rover")},
{ MAV_TYPE_SURFACE_BOAT, tr("Surface vessel, boat, ship")},
{ MAV_TYPE_SUBMARINE, tr("Submarine")},
{ MAV_TYPE_HEXAROTOR, tr("Hexarotor")},
{ MAV_TYPE_OCTOROTOR, tr("Octorotor")},
{ MAV_TYPE_TRICOPTER, tr("Octorotor")},
{ MAV_TYPE_FLAPPING_WING, tr("Flapping wing")},
{ MAV_TYPE_KITE, tr("Flapping wing")},
{ MAV_TYPE_ONBOARD_CONTROLLER, tr("Onboard companion controller")},
{ MAV_TYPE_VTOL_DUOROTOR, tr("Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter")},
{ MAV_TYPE_VTOL_QUADROTOR, tr("Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter")},
{ MAV_TYPE_VTOL_TILTROTOR, tr("Tiltrotor VTOL")},
{ MAV_TYPE_VTOL_RESERVED2, tr("VTOL reserved 2")},
{ MAV_TYPE_VTOL_RESERVED3, tr("VTOL reserved 3")},
{ MAV_TYPE_VTOL_RESERVED4, tr("VTOL reserved 4")},
{ MAV_TYPE_VTOL_RESERVED5, tr("VTOL reserved 5")},
{ MAV_TYPE_GIMBAL, tr("Onboard gimbal")},
{ MAV_TYPE_ADSB, tr("Onboard ADSB peripheral")},
};
return typeNames[_vehicleType];
}
/// Returns the string to speak to identify the vehicle
QString Vehicle::_vehicleIdSpeech(void)
{
if (_toolbox->multiVehicleManager()->vehicles()->count() > 1) {
return QString(tr("vehicle %1")).arg(id());
void Vehicle::_handleFlightModeChanged(const QString& flightMode)
_say(QString(tr("%1 %2 flight mode")).arg(_vehicleIdSpeech()).arg(flightMode));
emit guidedModeChanged(_firmwarePlugin->isGuidedMode(this));
}
void Vehicle::_announceArmedChanged(bool armed)
{
_say(QString("%1 %2").arg(_vehicleIdSpeech()).arg(armed ? QString(tr("armed")) : QString(tr("disarmed"))));
void Vehicle::_setFlying(bool flying)
_flying = flying;
emit flyingChanged(flying);
}
}
void Vehicle::_setLanding(bool landing)
{
if (armed() && _landing != landing) {
_landing = landing;
emit landingChanged(landing);
}
}
bool Vehicle::guidedModeSupported(void) const
{
return _firmwarePlugin->isCapable(this, FirmwarePlugin::GuidedModeCapability);
}
bool Vehicle::pauseVehicleSupported(void) const
{
return _firmwarePlugin->isCapable(this, FirmwarePlugin::PauseVehicleCapability);
}
bool Vehicle::orbitModeSupported() const
{
return _firmwarePlugin->isCapable(this, FirmwarePlugin::OrbitModeCapability);
bool Vehicle::takeoffVehicleSupported() const
{
return _firmwarePlugin->isCapable(this, FirmwarePlugin::TakeoffVehicleCapability);
}
void Vehicle::guidedModeRTL(void)
{
if (!guidedModeSupported()) {
qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
return;
}
_firmwarePlugin->guidedModeRTL(this);
}
void Vehicle::guidedModeLand(void)
{
if (!guidedModeSupported()) {
qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
return;
}
_firmwarePlugin->guidedModeLand(this);
}
void Vehicle::guidedModeTakeoff(double altitudeRelative)
qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
_firmwarePlugin->guidedModeTakeoff(this, altitudeRelative);
double Vehicle::minimumTakeoffAltitude(void)
{
return _firmwarePlugin->minimumTakeoffAltitude(this);
}
void Vehicle::startMission(void)
{
_firmwarePlugin->startMission(this);
}
void Vehicle::guidedModeGotoLocation(const QGeoCoordinate& gotoCoord)
{
if (!guidedModeSupported()) {
qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
if (!coordinate().isValid()) {
return;
}
double maxDistance = 1000.0;
if (coordinate().distanceTo(gotoCoord) > maxDistance) {
qgcApp()->showMessage(QString("New location is too far. Must be less than %1 %2").arg(qRound(FactMetaData::metersToAppSettingsDistanceUnits(maxDistance).toDouble())).arg(FactMetaData::appSettingsDistanceUnitsString()));
return;
}
_firmwarePlugin->guidedModeGotoLocation(this, gotoCoord);
}
void Vehicle::guidedModeChangeAltitude(double altitudeChange)
qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
_firmwarePlugin->guidedModeChangeAltitude(this, altitudeChange);
void Vehicle::guidedModeOrbit(const QGeoCoordinate& centerCoord, double radius, double velocity, double altitude)
{
if (!orbitModeSupported()) {
qgcApp()->showMessage(QStringLiteral("Orbit mode not supported by Vehicle."));
return;
}
_firmwarePlugin->guidedModeOrbit(this, centerCoord, radius, velocity, altitude);
}
void Vehicle::pauseVehicle(void)
{
if (!pauseVehicleSupported()) {
qgcApp()->showMessage(QStringLiteral("Pause not supported by vehicle."));
return;
}
_firmwarePlugin->pauseVehicle(this);
}
Danny Schrader
committed
void Vehicle::abortLanding(double climbOutAltitude)
{
sendMavCommand(defaultComponentId(),
MAV_CMD_DO_GO_AROUND,
true, // show error if fails
Danny Schrader
committed
climbOutAltitude);
}
bool Vehicle::guidedMode(void) const
{
return _firmwarePlugin->isGuidedMode(this);
}
void Vehicle::setGuidedMode(bool guidedMode)
{
return _firmwarePlugin->setGuidedMode(this, guidedMode);
}
void Vehicle::emergencyStop(void)
{
MAV_CMD_COMPONENT_ARM_DISARM,
true, // show error if fails
0.0f,
21196.0f); // Magic number for emergency stop
void Vehicle::setCurrentMissionSequence(int seq)
{
if (!_firmwarePlugin->sendHomePositionToVehicle()) {
seq--;
}
mavlink_message_t msg;
mavlink_msg_mission_set_current_pack_chan(_mavlink->getSystemId(),
_mavlink->getComponentId(),
priorityLink()->mavlinkChannel(),
&msg,
id(),
_compID,
seq);
sendMessageOnLink(priorityLink(), msg);
void Vehicle::sendMavCommand(int component, MAV_CMD command, bool showError, float param1, float param2, float param3, float param4, float param5, float param6, float param7)
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
MavCommandQueueEntry_t entry;
entry.component = component;
entry.command = command;
entry.showError = showError;
entry.rgParam[0] = param1;
entry.rgParam[1] = param2;
entry.rgParam[2] = param3;
entry.rgParam[3] = param4;
entry.rgParam[4] = param5;
entry.rgParam[5] = param6;
entry.rgParam[6] = param7;
_mavCommandQueue.append(entry);
if (_mavCommandQueue.count() == 1) {
_mavCommandRetryCount = 0;
_sendMavCommandAgain();
}
}
void Vehicle::_sendMavCommandAgain(void)
{
Gus Grubba
committed
if(!_mavCommandQueue.size()) {
qWarning() << "Command resend with no commands in queue";
_mavCommandAckTimer.stop();
return;
}
MavCommandQueueEntry_t& queuedCommand = _mavCommandQueue[0];
if (_mavCommandRetryCount++ > _mavCommandMaxRetryCount) {
if (queuedCommand.command == MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES) {
// We aren't going to get a response back for capabilities, so stop waiting for it before we ask for mission items
qCDebug(VehicleLog) << "Vehicle failed to responded to MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES. Setting no capabilities. Starting Plan request.";
if (queuedCommand.command == MAV_CMD_REQUEST_PROTOCOL_VERSION) {
Lorenz Meier
committed
// We aren't going to get a response back for the protocol version, so assume v1 is all we can do.
// If the max protocol version is uninitialized, fall back to v1.
qCDebug(VehicleLog) << "Vehicle failed to responded to MAV_CMD_REQUEST_PROTOCOL_VERSION. Starting Plan request.";
Lorenz Meier
committed
if (_maxProtoVersion == 0) {
qCDebug(VehicleLog) << "Setting _maxProtoVersion to 100 since not yet set.";
Lorenz Meier
committed
_setMaxProtoVersion(100);
} else {
qCDebug(VehicleLog) << "Leaving _maxProtoVersion at current value" << _maxProtoVersion;
Lorenz Meier
committed
}
emit mavCommandResult(_id, queuedCommand.component, queuedCommand.command, MAV_RESULT_FAILED, true /* noResponsefromVehicle */);
if (queuedCommand.showError) {
qgcApp()->showMessage(tr("Vehicle did not respond to command: %1").arg(_toolbox->missionCommandTree()->friendlyName(queuedCommand.command)));
}
_mavCommandQueue.removeFirst();
_sendNextQueuedMavCommand();
return;
}
// We always let AUTOPILOT_CAPABILITIES go through multiple times even if we don't get acks. This is because
// we really need to get capabilities and version info back over a lossy link.
if (queuedCommand.command != MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES) {
if (px4Firmware()) {
// Older PX4 firmwares are inconsistent with repect to sending back an Ack from a COMMAND_LONG, hence we can't support retry logic for it.
if (_firmwareMajorVersion != versionNotSetValue) {
// If no version set assume lastest master dev build, so acks are suppored
if (_firmwareMajorVersion <= 1 && _firmwareMinorVersion <= 5 && _firmwarePatchVersion <= 3) {
// Acks not supported in this version
return;
}
}
} else {
if (queuedCommand.command == MAV_CMD_START_RX_PAIR) {
// The implementation of this command comes from the IO layer and is shared across stacks. So for other firmwares
// we aren't really sure whether they are correct or not.
return;
}
}
qCDebug(VehicleLog) << "Vehicle::_sendMavCommandAgain retrying command:_mavCommandRetryCount" << queuedCommand.command << _mavCommandRetryCount;
_mavCommandAckTimer.start();
mavlink_message_t msg;
mavlink_command_long_t cmd;
cmd.command = queuedCommand.command;
cmd.param1 = queuedCommand.rgParam[0];
cmd.param2 = queuedCommand.rgParam[1];
cmd.param3 = queuedCommand.rgParam[2];
cmd.param4 = queuedCommand.rgParam[3];
cmd.param5 = queuedCommand.rgParam[4];
cmd.param6 = queuedCommand.rgParam[5];
cmd.param7 = queuedCommand.rgParam[6];
cmd.target_system = _id;
cmd.target_component = queuedCommand.component;
mavlink_msg_command_long_encode_chan(_mavlink->getSystemId(),
_mavlink->getComponentId(),
priorityLink()->mavlinkChannel(),
&msg,
&cmd);
sendMessageOnLink(priorityLink(), msg);
void Vehicle::_sendNextQueuedMavCommand(void)
{
if (_mavCommandQueue.count()) {
_mavCommandRetryCount = 0;
_sendMavCommandAgain();
}
}
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
void Vehicle::_handleCommandAck(mavlink_message_t& message)
{
bool showError = false;
mavlink_command_ack_t ack;
mavlink_msg_command_ack_decode(&message, &ack);
if (ack.command == MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES && ack.result != MAV_RESULT_ACCEPTED) {
// We aren't going to get a response back for capabilities, so stop waiting for it before we ask for mission items
qCDebug(VehicleLog) << QStringLiteral("Vehicle responded to MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES with error(%1). Setting no capabilities. Starting Plan request.").arg(ack.result);
_setCapabilities(0);
}
if (ack.command == MAV_CMD_REQUEST_PROTOCOL_VERSION && ack.result != MAV_RESULT_ACCEPTED) {
// The autopilot does not understand the request and consequently is likely handling only
// MAVLink 1
qCDebug(VehicleLog) << QStringLiteral("Vehicle responded to MAV_CMD_REQUEST_PROTOCOL_VERSION with error(%1).").arg(ack.result);
if (_maxProtoVersion == 0) {
qCDebug(VehicleLog) << "Setting _maxProtoVersion to 100 since not yet set.";
_setMaxProtoVersion(100);
} else {
qCDebug(VehicleLog) << "Leaving _maxProtoVersion at current value" << _maxProtoVersion;
}
// FIXME: Is this missing here. I believe it is a bug. Debug to verify. May need to go into Stable.
//_startPlanRequest();
}
if (_mavCommandQueue.count() && ack.command == _mavCommandQueue[0].command) {
_mavCommandAckTimer.stop();
showError = _mavCommandQueue[0].showError;
_mavCommandQueue.removeFirst();
}
emit mavCommandResult(_id, message.compid, ack.command, ack.result, false /* noResponsefromVehicle */);
if (showError) {
QString commandName = _toolbox->missionCommandTree()->friendlyName((MAV_CMD)ack.command);
switch (ack.result) {
case MAV_RESULT_TEMPORARILY_REJECTED:
qgcApp()->showMessage(tr("%1 command temporarily rejected").arg(commandName));
break;
case MAV_RESULT_DENIED:
qgcApp()->showMessage(tr("%1 command denied").arg(commandName));
break;
case MAV_RESULT_UNSUPPORTED:
qgcApp()->showMessage(tr("%1 command not supported").arg(commandName));
break;
case MAV_RESULT_FAILED:
qgcApp()->showMessage(tr("%1 command failed").arg(commandName));
break;
default:
// Do nothing
break;
}
}
_sendNextQueuedMavCommand();
}
void Vehicle::setPrearmError(const QString& prearmError)
{
_prearmError = prearmError;
emit prearmErrorChanged(_prearmError);
if (!_prearmError.isEmpty()) {
_prearmErrorTimer.start();
}
}
void Vehicle::_prearmErrorTimeout(void)
{
setPrearmError(QString());
}
void Vehicle::setFirmwareVersion(int majorVersion, int minorVersion, int patchVersion, FIRMWARE_VERSION_TYPE versionType)
{
_firmwareMajorVersion = majorVersion;
_firmwareMinorVersion = minorVersion;
_firmwarePatchVersion = patchVersion;
_firmwareVersionType = versionType;
emit firmwareVersionChanged();
}
void Vehicle::setFirmwareCustomVersion(int majorVersion, int minorVersion, int patchVersion)
{
_firmwareCustomMajorVersion = majorVersion;
_firmwareCustomMinorVersion = minorVersion;
_firmwareCustomPatchVersion = patchVersion;
emit firmwareCustomVersionChanged();
}
QString Vehicle::firmwareVersionTypeString(void) const
{
switch (_firmwareVersionType) {
case FIRMWARE_VERSION_TYPE_DEV:
return QStringLiteral("dev");
case FIRMWARE_VERSION_TYPE_ALPHA:
return QStringLiteral("alpha");
case FIRMWARE_VERSION_TYPE_BETA:
return QStringLiteral("beta");
case FIRMWARE_VERSION_TYPE_RC:
return QStringLiteral("rc");
case FIRMWARE_VERSION_TYPE_OFFICIAL:
default:
return QStringLiteral("");
}
sendMavCommand(_defaultComponentId, MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN, true, 1.0f);
void Vehicle::setSoloFirmware(bool soloFirmware)
{
if (soloFirmware != _soloFirmware) {
_soloFirmware = soloFirmware;
emit soloFirmwareChanged(soloFirmware);
}
}
// Temporarily removed, waiting for new command implementation
void Vehicle::motorTest(int motor, int percent, int timeoutSecs)
{
doCommandLongUnverified(_defaultComponentId, MAV_CMD_DO_MOTOR_TEST, motor, MOTOR_TEST_THROTTLE_PERCENT, percent, timeoutSecs);
QString Vehicle::brandImageIndoor(void) const
return _firmwarePlugin->brandImageIndoor(this);
}
QString Vehicle::brandImageOutdoor(void) const
{
return _firmwarePlugin->brandImageOutdoor(this);
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
QStringList Vehicle::unhealthySensors(void) const
{
QStringList sensorList;
struct sensorInfo_s {
uint32_t bit;
const char* sensorName;
};
static const sensorInfo_s rgSensorInfo[] = {
{ MAV_SYS_STATUS_SENSOR_3D_GYRO, "Gyro" },
{ MAV_SYS_STATUS_SENSOR_3D_ACCEL, "Accelerometer" },
{ MAV_SYS_STATUS_SENSOR_3D_MAG, "Magnetometer" },
{ MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE, "Absolute pressure" },
{ MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE, "Differential pressure" },
{ MAV_SYS_STATUS_SENSOR_GPS, "GPS" },
{ MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW, "Optical flow" },
{ MAV_SYS_STATUS_SENSOR_VISION_POSITION, "Computer vision position" },
{ MAV_SYS_STATUS_SENSOR_LASER_POSITION, "Laser based position" },
{ MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH, "External ground truth" },
{ MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL, "Angular rate control" },
{ MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION, "Attitude stabilization" },
{ MAV_SYS_STATUS_SENSOR_YAW_POSITION, "Yaw position" },
{ MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL, "Z/altitude control" },
{ MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL, "X/Y position control" },
{ MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS, "Motor outputs / control" },
{ MAV_SYS_STATUS_SENSOR_RC_RECEIVER, "RC receiver" },
{ MAV_SYS_STATUS_SENSOR_3D_GYRO2, "Gyro 2" },
{ MAV_SYS_STATUS_SENSOR_3D_ACCEL2, "Accelerometer 2" },
{ MAV_SYS_STATUS_SENSOR_3D_MAG2, "Magnetometer 2" },
{ MAV_SYS_STATUS_GEOFENCE, "GeoFence" },
{ MAV_SYS_STATUS_AHRS, "AHRS" },
{ MAV_SYS_STATUS_TERRAIN, "Terrain" },
{ MAV_SYS_STATUS_REVERSE_MOTOR, "Motors reversed" },
{ MAV_SYS_STATUS_LOGGING, "Logging" },
{ MAV_SYS_STATUS_SENSOR_BATTERY, "Battery" },
};
for (size_t i=0; i<sizeof(rgSensorInfo)/sizeof(sensorInfo_s); i++) {
const sensorInfo_s* pSensorInfo = &rgSensorInfo[i];
if ((_onboardControlSensorsEnabled & pSensorInfo->bit) && !(_onboardControlSensorsHealth & pSensorInfo->bit)) {
sensorList << pSensorInfo->sensorName;
}
}
return sensorList;
}
void Vehicle::setOfflineEditingDefaultComponentId(int defaultComponentId)
{
if (_offlineEditingVehicle) {
_defaultComponentId = defaultComponentId;
} else {
qWarning() << "Call to Vehicle::setOfflineEditingDefaultComponentId on vehicle which is not offline";
}
}
MAV_CMD_DO_DIGICAM_CONTROL,
true, // show errors
0.0, 0.0, 0.0, 0.0, // param 1-4 unused
1.0, // trigger camera
0.0, // param 6 unused
1.0); // test shot flag
void Vehicle::setVtolInFwdFlight(bool vtolInFwdFlight)
{
if (_vtolInFwdFlight != vtolInFwdFlight) {
sendMavCommand(_defaultComponentId,
MAV_CMD_DO_VTOL_TRANSITION,
true, // show errors
vtolInFwdFlight ? MAV_VTOL_STATE_FW : MAV_VTOL_STATE_MC, // transition state
0, 0, 0, 0, 0, 0); // param 2-7 unused
const char* VehicleGPSFactGroup::_latFactName = "lat";
const char* VehicleGPSFactGroup::_lonFactName = "lon";
const char* VehicleGPSFactGroup::_hdopFactName = "hdop";
const char* VehicleGPSFactGroup::_vdopFactName = "vdop";
const char* VehicleGPSFactGroup::_courseOverGroundFactName = "courseOverGround";
const char* VehicleGPSFactGroup::_countFactName = "count";
const char* VehicleGPSFactGroup::_lockFactName = "lock";
VehicleGPSFactGroup::VehicleGPSFactGroup(QObject* parent)
: FactGroup(1000, ":/json/Vehicle/GPSFact.json", parent)
, _latFact (0, _latFactName, FactMetaData::valueTypeDouble)
, _lonFact (0, _lonFactName, FactMetaData::valueTypeDouble)
, _hdopFact (0, _hdopFactName, FactMetaData::valueTypeDouble)
, _vdopFact (0, _vdopFactName, FactMetaData::valueTypeDouble)
, _courseOverGroundFact (0, _courseOverGroundFactName, FactMetaData::valueTypeDouble)
, _countFact (0, _countFactName, FactMetaData::valueTypeInt32)
, _lockFact (0, _lockFactName, FactMetaData::valueTypeInt32)
{
_addFact(&_latFact, _latFactName);
_addFact(&_lonFact, _lonFactName);
_addFact(&_hdopFact, _hdopFactName);
_addFact(&_vdopFact, _vdopFactName);
_addFact(&_courseOverGroundFact, _courseOverGroundFactName);
_addFact(&_lockFact, _lockFactName);
_addFact(&_countFact, _countFactName);
_latFact.setRawValue(std::numeric_limits<float>::quiet_NaN());