Vehicle.cc

        }
    }

    emit remoteControlRSSIChanged(channels.rssi);
    emit rcChannelsChanged(channels.chancount, pwmValues);
}

void Vehicle::_handleRCChannelsRaw(mavlink_message_t& message)
{
    // We handle both RC_CHANNLES and RC_CHANNELS_RAW since different firmware will only
    // send one or the other.

    mavlink_rc_channels_raw_t channels;

    mavlink_msg_rc_channels_raw_decode(&message, &channels);

    uint16_t* _rgChannelvalues[cMaxRcChannels] = {
        &channels.chan1_raw,
        &channels.chan2_raw,
        &channels.chan3_raw,
        &channels.chan4_raw,
        &channels.chan5_raw,
        &channels.chan6_raw,
        &channels.chan7_raw,
        &channels.chan8_raw,
    };

    int pwmValues[cMaxRcChannels];
    int channelCount = 0;

    for (int i=0; i<cMaxRcChannels; i++) {
        pwmValues[i] = -1;
    }

    for (int i=0; i<8; i++) {
        uint16_t channelValue = *_rgChannelvalues[i];

        if (channelValue == UINT16_MAX) {
            pwmValues[i] = -1;
        } else {
            channelCount = i + 1;
            pwmValues[i] = channelValue;
        }
    }
    for (int i=9; i<18; i++) {
        pwmValues[i] = -1;
    }

    emit remoteControlRSSIChanged(channels.rssi);
    emit rcChannelsChanged(channelCount, pwmValues);
}

void Vehicle::_handleScaledPressure(mavlink_message_t& message) {
    mavlink_scaled_pressure_t pressure;
    mavlink_msg_scaled_pressure_decode(&message, &pressure);
    _temperatureFactGroup.temperature1()->setRawValue(pressure.temperature / 100.0);
}

void Vehicle::_handleScaledPressure2(mavlink_message_t& message) {
    mavlink_scaled_pressure2_t pressure;
    mavlink_msg_scaled_pressure2_decode(&message, &pressure);
    _temperatureFactGroup.temperature2()->setRawValue(pressure.temperature / 100.0);
}

void Vehicle::_handleScaledPressure3(mavlink_message_t& message) {
    mavlink_scaled_pressure3_t pressure;
    mavlink_msg_scaled_pressure3_decode(&message, &pressure);
    _temperatureFactGroup.temperature3()->setRawValue(pressure.temperature / 100.0);
}

bool Vehicle::_containsLink(LinkInterface* link)
{
    return _links.contains(link);
}

void Vehicle::_addLink(LinkInterface* link)
{
    if (!_containsLink(link)) {
        qCDebug(VehicleLog) << "_addLink:" << QString("%1").arg((ulong)link, 0, 16);
        _links += link;
        _updatePriorityLink();
        connect(qgcApp()->toolbox()->linkManager(), &LinkManager::linkInactive, this, &Vehicle::_linkInactiveOrDeleted);
        connect(qgcApp()->toolbox()->linkManager(), &LinkManager::linkDeleted, this, &Vehicle::_linkInactiveOrDeleted);
    }
}

void Vehicle::_linkInactiveOrDeleted(LinkInterface* link)
{
    qCDebug(VehicleLog) << "_linkInactiveOrDeleted linkCount" << _links.count();

    _links.removeOne(link);
    _updatePriorityLink();

    if (_links.count() == 0 && !_allLinksInactiveSent) {
        qCDebug(VehicleLog) << "All links inactive";
        // Make sure to not send this more than one time
        _allLinksInactiveSent = true;
        emit allLinksInactive(this);
    }
}

bool Vehicle::sendMessageOnLink(LinkInterface* link, mavlink_message_t message)
{
    if (!link || !_links.contains(link) || !link->isConnected()) {
        return false;
    }

    emit _sendMessageOnLinkOnThread(link, message);

    return true;
}

void Vehicle::_sendMessageOnLink(LinkInterface* link, mavlink_message_t message)
{
    // Make sure this is still a good link
    if (!link || !_links.contains(link) || !link->isConnected()) {
        return;
    }

#if 0
    // Leaving in for ease in Mav 2.0 testing
    mavlink_status_t* mavlinkStatus = mavlink_get_channel_status(link->mavlinkChannel());
    qDebug() << "_sendMessageOnLink" << mavlinkStatus << link->mavlinkChannel() << mavlinkStatus->flags << message.magic;
#endif

    // Give the plugin a chance to adjust
    _firmwarePlugin->adjustOutgoingMavlinkMessage(this, link, &message);

    // Write message into buffer, prepending start sign
    uint8_t buffer[MAVLINK_MAX_PACKET_LEN];
    int len = mavlink_msg_to_send_buffer(buffer, &message);

    link->writeBytesSafe((const char*)buffer, len);
    _messagesSent++;
    emit messagesSentChanged();
}

void Vehicle::_updatePriorityLink(void)
{
    LinkInterface* newPriorityLink = NULL;

#ifndef NO_SERIAL_LINK
    // Note that this routine specificallty does not clear _priorityLink when there are no links remaining.
    // By doing this we hold a reference on the last link as the Vehicle shuts down. Thus preventing shutdown
    // ordering NULL pointer crashes where priorityLink() is still called during shutdown sequence.
    for (int i=0; i<_links.count(); i++) {
        LinkInterface* link = _links[i];
        if (link->isConnected()) {
            SerialLink* pSerialLink = qobject_cast<SerialLink*>(link);
            if (pSerialLink) {
                LinkConfiguration* config = pSerialLink->getLinkConfiguration();
                if (config) {
                    SerialConfiguration* pSerialConfig = qobject_cast<SerialConfiguration*>(config);
                    if (pSerialConfig && pSerialConfig->usbDirect()) {
                        if (_priorityLink.data() != link) {
                            newPriorityLink = link;
                            break;
                        }
                        return;
                    }
                }
            }
        }
    }
#endif

    if (!newPriorityLink && !_priorityLink.data() && _links.count()) {
        newPriorityLink = _links[0];
    }

    if (newPriorityLink) {
        _priorityLink = qgcApp()->toolbox()->linkManager()->sharedLinkInterfacePointerForLink(newPriorityLink);
    }
}

void Vehicle::setLatitude(double latitude)
{
    _coordinate.setLatitude(latitude);
    emit coordinateChanged(_coordinate);
}

void Vehicle::setLongitude(double longitude){
    _coordinate.setLongitude(longitude);
    emit coordinateChanged(_coordinate);
}

void Vehicle::setAltitude(double altitude){
    _coordinate.setAltitude(altitude);
    emit coordinateChanged(_coordinate);
}

void Vehicle::_updateAttitude(UASInterface*, double roll, double pitch, double yaw, quint64)
{
    if (qIsInf(roll)) {
        _rollFact.setRawValue(0);
    } else {
        _rollFact.setRawValue(roll * (180.0 / M_PI));
    }
    if (qIsInf(pitch)) {
        _pitchFact.setRawValue(0);
    } else {
        _pitchFact.setRawValue(pitch * (180.0 / M_PI));
    }
    if (qIsInf(yaw)) {
        _headingFact.setRawValue(0);
    } else {
        yaw = yaw * (180.0 / M_PI);
        if (yaw < 0) yaw += 360;
        _headingFact.setRawValue(yaw);
    }
}

void Vehicle::_updateAttitude(UASInterface* uas, int, double roll, double pitch, double yaw, quint64 timestamp)
{
    _updateAttitude(uas, roll, pitch, yaw, timestamp);
}

int Vehicle::motorCount(void)
{
    switch (_vehicleType) {
    case MAV_TYPE_HELICOPTER:
        return 1;
    case MAV_TYPE_VTOL_DUOROTOR:
        return 2;
    case MAV_TYPE_TRICOPTER:
        return 3;
    case MAV_TYPE_QUADROTOR:
    case MAV_TYPE_VTOL_QUADROTOR:
        return 4;
    case MAV_TYPE_HEXAROTOR:
        return 6;
    case MAV_TYPE_OCTOROTOR:
        return 8;
    default:
        return -1;
    }
}

bool Vehicle::coaxialMotors(void)
{
    return _firmwarePlugin->multiRotorCoaxialMotors(this);
}

bool Vehicle::xConfigMotors(void)
{
    return _firmwarePlugin->multiRotorXConfig(this);
}

/*
 * Internal
 */

QString Vehicle::getMavIconColor()
{
    // TODO: Not using because not only the colors are ghastly, it doesn't respect dark/light palette
    if(_mav)
        return _mav->getColor().name();
    else
        return QString("black");
}

QString Vehicle::formatedMessages()
{
    QString messages;
    foreach(UASMessage* message, qgcApp()->toolbox()->uasMessageHandler()->messages()) {
        messages += message->getFormatedText();
    }
    return messages;
}

void Vehicle::clearMessages()
{
    qgcApp()->toolbox()->uasMessageHandler()->clearMessages();
}

void Vehicle::_handletextMessageReceived(UASMessage* message)
{
    if(message)
    {
        _formatedMessage = message->getFormatedText();
        emit formatedMessageChanged();
    }
}

void Vehicle::_handleTextMessage(int newCount)
{
    // Reset?
    if(!newCount) {
        _currentMessageCount = 0;
        _currentNormalCount  = 0;
        _currentWarningCount = 0;
        _currentErrorCount   = 0;
        _messageCount        = 0;
        _currentMessageType  = MessageNone;
        emit newMessageCountChanged();
        emit messageTypeChanged();
        emit messageCountChanged();
        return;
    }

    UASMessageHandler* pMh = qgcApp()->toolbox()->uasMessageHandler();
    Q_ASSERT(pMh);
    MessageType_t type = newCount ? _currentMessageType : MessageNone;
    int errorCount     = _currentErrorCount;
    int warnCount      = _currentWarningCount;
    int normalCount    = _currentNormalCount;
    //-- Add current message counts
    errorCount  += pMh->getErrorCount();
    warnCount   += pMh->getWarningCount();
    normalCount += pMh->getNormalCount();
    //-- See if we have a higher level
    if(errorCount != _currentErrorCount) {
        _currentErrorCount = errorCount;
        type = MessageError;
    }
    if(warnCount != _currentWarningCount) {
        _currentWarningCount = warnCount;
        if(_currentMessageType != MessageError) {
            type = MessageWarning;
        }
    }
    if(normalCount != _currentNormalCount) {
        _currentNormalCount = normalCount;
        if(_currentMessageType != MessageError && _currentMessageType != MessageWarning) {
            type = MessageNormal;
        }
    }
    int count = _currentErrorCount + _currentWarningCount + _currentNormalCount;
    if(count != _currentMessageCount) {
        _currentMessageCount = count;
        // Display current total new messages count
        emit newMessageCountChanged();
    }
    if(type != _currentMessageType) {
        _currentMessageType = type;
        // Update message level
        emit messageTypeChanged();
    }
    // Update message count (all messages)
    if(newCount != _messageCount) {
        _messageCount = newCount;
        emit messageCountChanged();
    }
    QString errMsg = pMh->getLatestError();
    if(errMsg != _latestError) {
        _latestError = errMsg;
        emit latestErrorChanged();
    }
}

void Vehicle::resetMessages()
{
    // Reset Counts
    int count = _currentMessageCount;
    MessageType_t type = _currentMessageType;
    _currentErrorCount   = 0;
    _currentWarningCount = 0;
    _currentNormalCount  = 0;
    _currentMessageCount = 0;
    _currentMessageType = MessageNone;
    if(count != _currentMessageCount) {
        emit newMessageCountChanged();
    }
    if(type != _currentMessageType) {
        emit messageTypeChanged();
    }
}

int Vehicle::manualControlReservedButtonCount(void)
{
    return _firmwarePlugin->manualControlReservedButtonCount();
}

void Vehicle::_loadSettings(void)
{
    QSettings settings;

    settings.beginGroup(QString(_settingsGroup).arg(_id));

    bool convertOk;

    _joystickMode = (JoystickMode_t)settings.value(_joystickModeSettingsKey, JoystickModeRC).toInt(&convertOk);
    if (!convertOk) {
        _joystickMode = JoystickModeRC;
    }

    // Joystick enabled is a global setting so first make sure there are any joysticks connected
    if (qgcApp()->toolbox()->joystickManager()->joysticks().count()) {
        _joystickEnabled = settings.value(_joystickEnabledSettingsKey, false).toBool();
    }
}

void Vehicle::_saveSettings(void)
{
    QSettings settings;

    settings.beginGroup(QString(_settingsGroup).arg(_id));

    settings.setValue(_joystickModeSettingsKey, _joystickMode);

    // The joystick enabled setting should only be changed if a joystick is present
    // since the checkbox can only be clicked if one is present
    if (qgcApp()->toolbox()->joystickManager()->joysticks().count()) {
        settings.setValue(_joystickEnabledSettingsKey, _joystickEnabled);
    }
}

int Vehicle::joystickMode(void)
{
    return _joystickMode;
}

void Vehicle::setJoystickMode(int mode)
{
    if (mode < 0 || mode >= JoystickModeMax) {
        qCWarning(VehicleLog) << "Invalid joystick mode" << mode;
        return;
    }

    _joystickMode = (JoystickMode_t)mode;
    _saveSettings();
    emit joystickModeChanged(mode);
}

QStringList Vehicle::joystickModes(void)
{
    QStringList list;

    list << "Normal" << "Attitude" << "Position" << "Force" << "Velocity";

    return list;
}

void Vehicle::_activeJoystickChanged(void)
{
    _loadSettings();
    _startJoystick(true);
}

bool Vehicle::joystickEnabled(void)
{
    return _joystickEnabled;
}

void Vehicle::setJoystickEnabled(bool enabled)
{
    _joystickEnabled = enabled;
    _startJoystick(_joystickEnabled);
    _saveSettings();
    emit joystickEnabledChanged(_joystickEnabled);
}

void Vehicle::_startJoystick(bool start)
{
    Joystick* joystick = _joystickManager->activeJoystick();
    if (joystick) {
        if (start) {
            if (_joystickEnabled) {
                joystick->startPolling(this);
            }
        } else {
            joystick->stopPolling();
        }
    }
}

bool Vehicle::active(void)
{
    return _active;
}

void Vehicle::setActive(bool active)
{
    _active = active;

    _startJoystick(_active);
}

bool Vehicle::homePositionAvailable(void)
{
    return _homePositionAvailable;
}

QGeoCoordinate Vehicle::homePosition(void)
{
    return _homePosition;
}

void Vehicle::setArmed(bool armed)
{
    // We specifically use COMMAND_LONG:MAV_CMD_COMPONENT_ARM_DISARM since it is supported by more flight stacks.
    sendMavCommand(_defaultComponentId,
                   MAV_CMD_COMPONENT_ARM_DISARM,
                   true,    // show error if fails
                   armed ? 1.0f : 0.0f);
}

bool Vehicle::flightModeSetAvailable(void)
{
    return _firmwarePlugin->isCapable(this, FirmwarePlugin::SetFlightModeCapability);
}

QStringList Vehicle::flightModes(void)
{
    return _firmwarePlugin->flightModes(this);
}

QString Vehicle::flightMode(void) const
{
    return _firmwarePlugin->flightMode(_base_mode, _custom_mode);
}

void Vehicle::setFlightMode(const QString& flightMode)
{
    uint8_t     base_mode;
    uint32_t    custom_mode;

    qDebug() << flightMode;

    if (_firmwarePlugin->setFlightMode(flightMode, &base_mode, &custom_mode)) {
        // setFlightMode will only set MAV_MODE_FLAG_CUSTOM_MODE_ENABLED in base_mode, we need to move back in the existing
        // states.
        uint8_t newBaseMode = _base_mode & ~MAV_MODE_FLAG_DECODE_POSITION_CUSTOM_MODE;
        newBaseMode |= base_mode;

        mavlink_message_t msg;
        mavlink_msg_set_mode_pack_chan(_mavlink->getSystemId(),
                                       _mavlink->getComponentId(),
                                       priorityLink()->mavlinkChannel(),
                                       &msg,
                                       id(),
                                       newBaseMode,
                                       custom_mode);
        sendMessageOnLink(priorityLink(), msg);
    } else {
        qWarning() << "FirmwarePlugin::setFlightMode failed, flightMode:" << flightMode;
    }
}

bool Vehicle::hilMode(void)
{
    return _base_mode & MAV_MODE_FLAG_HIL_ENABLED;
}

void Vehicle::setHilMode(bool hilMode)
{
    mavlink_message_t msg;

    uint8_t newBaseMode = _base_mode & ~MAV_MODE_FLAG_DECODE_POSITION_HIL;
    if (hilMode) {
        newBaseMode |= MAV_MODE_FLAG_HIL_ENABLED;
    }

    mavlink_msg_set_mode_pack_chan(_mavlink->getSystemId(),
                                   _mavlink->getComponentId(),
                                   priorityLink()->mavlinkChannel(),
                                   &msg,
                                   id(),
                                   newBaseMode,
                                   _custom_mode);
    sendMessageOnLink(priorityLink(), msg);
}

void Vehicle::requestDataStream(MAV_DATA_STREAM stream, uint16_t rate, bool sendMultiple)
{
    mavlink_message_t               msg;
    mavlink_request_data_stream_t   dataStream;

    dataStream.req_stream_id = stream;
    dataStream.req_message_rate = rate;
    dataStream.start_stop = 1;  // start
    dataStream.target_system = id();
    dataStream.target_component = _defaultComponentId;

    mavlink_msg_request_data_stream_encode_chan(_mavlink->getSystemId(),
                                                _mavlink->getComponentId(),
                                                priorityLink()->mavlinkChannel(),
                                                &msg,
                                                &dataStream);

    if (sendMultiple) {
        // We use sendMessageMultiple since we really want these to make it to the vehicle
        sendMessageMultiple(msg);
    } else {
        sendMessageOnLink(priorityLink(), msg);
    }
}

void Vehicle::_sendMessageMultipleNext(void)
{
    if (_nextSendMessageMultipleIndex < _sendMessageMultipleList.count()) {
        qCDebug(VehicleLog) << "_sendMessageMultipleNext:" << _sendMessageMultipleList[_nextSendMessageMultipleIndex].message.msgid;

        sendMessageOnLink(priorityLink(), _sendMessageMultipleList[_nextSendMessageMultipleIndex].message);

        if (--_sendMessageMultipleList[_nextSendMessageMultipleIndex].retryCount <= 0) {
            _sendMessageMultipleList.removeAt(_nextSendMessageMultipleIndex);
        } else {
            _nextSendMessageMultipleIndex++;
        }
    }

    if (_nextSendMessageMultipleIndex >= _sendMessageMultipleList.count()) {
        _nextSendMessageMultipleIndex = 0;
    }
}

void Vehicle::sendMessageMultiple(mavlink_message_t message)
{
    SendMessageMultipleInfo_t   info;

    info.message =      message;
    info.retryCount =   _sendMessageMultipleRetries;

    _sendMessageMultipleList.append(info);
}

void Vehicle::_missionManagerError(int errorCode, const QString& errorMsg)
{
    Q_UNUSED(errorCode);
    qgcApp()->showMessage(QString("Error during Mission communication with Vehicle: %1").arg(errorMsg));
}

void Vehicle::_geoFenceManagerError(int errorCode, const QString& errorMsg)
{
    Q_UNUSED(errorCode);
    qgcApp()->showMessage(QString("Error during GeoFence communication with Vehicle: %1").arg(errorMsg));
}

void Vehicle::_rallyPointManagerError(int errorCode, const QString& errorMsg)
{
    Q_UNUSED(errorCode);
    qgcApp()->showMessage(QString("Error during Rally Point communication with Vehicle: %1").arg(errorMsg));
}

void Vehicle::_addNewMapTrajectoryPoint(void)
{
    if (_mapTrajectoryHaveFirstCoordinate) {
        // Keep three minutes of trajectory
        if (_mapTrajectoryList.count() * _mapTrajectoryMsecsBetweenPoints > 3 * 1000 * 60) {
            _mapTrajectoryList.removeAt(0)->deleteLater();
        }
        _mapTrajectoryList.append(new CoordinateVector(_mapTrajectoryLastCoordinate, _coordinate, this));
        _flightDistanceFact.setRawValue(_flightDistanceFact.rawValue().toDouble() + _mapTrajectoryLastCoordinate.distanceTo(_coordinate));
    }
    _mapTrajectoryHaveFirstCoordinate = true;
    _mapTrajectoryLastCoordinate = _coordinate;
}

void Vehicle::_mapTrajectoryStart(void)
{
    _mapTrajectoryHaveFirstCoordinate = false;
    _mapTrajectoryList.clear();
    _mapTrajectoryTimer.start();
    _flightDistanceFact.setRawValue(0);
}

void Vehicle::_mapTrajectoryStop()
{
    _mapTrajectoryTimer.stop();
}

void Vehicle::_startMissionRequest(void)
{
    if (!_missionManagerInitialRequestSent && _parameterManager->parametersReady() && _vehicleCapabilitiesKnown) {
        qCDebug(VehicleLog) << "_startMissionRequest";
        _missionManagerInitialRequestSent = true;
        if (_settingsManager->appSettings()->autoLoadMissions()->rawValue().toBool()) {
            QString missionAutoLoadDirPath = _settingsManager->appSettings()->missionSavePath();
            if (!missionAutoLoadDirPath.isEmpty()) {
                QmlObjectListModel* visualItems = NULL;
                QDir missionAutoLoadDir(missionAutoLoadDirPath);
                QString autoloadFilename = missionAutoLoadDir.absoluteFilePath(tr("AutoLoad%1.%2").arg(_id).arg(AppSettings::missionFileExtension));
                if (MissionController::loadItemsFromFile(this, autoloadFilename, &visualItems)) {
                    MissionController::sendItemsToVehicle(this, visualItems);
                    return;
                }
            }
        }
        _missionManager->requestMissionItems();
    } else {
        if (!_parameterManager->parametersReady()) {
            qCDebug(VehicleLog) << "Delaying _startMissionRequest due to parameters not ready";
        } else if (!_vehicleCapabilitiesKnown) {
            qCDebug(VehicleLog) << "Delaying _startMissionRequest due to vehicle capabilities not know";
        }
    }
}

void Vehicle::_parametersReady(bool parametersReady)
{
    if (parametersReady) {
        _startMissionRequest();
    }

    if (parametersReady) {
        setJoystickEnabled(_joystickEnabled);
    }
}

void Vehicle::disconnectInactiveVehicle(void)
{
    // Vehicle is no longer communicating with us, disconnect all links


    LinkManager* linkMgr = qgcApp()->toolbox()->linkManager();
    for (int i=0; i<_links.count(); i++) {
        // FIXME: This linkInUse check is a hack fix for multiple vehicles on the same link.
        // The real fix requires significant restructuring which will come later.
        if (!qgcApp()->toolbox()->multiVehicleManager()->linkInUse(_links[i], this)) {
            linkMgr->disconnectLink(_links[i]);
        }
    }
}

void Vehicle::_imageReady(UASInterface*)
{
    if(_uas)
    {
        QImage img = _uas->getImage();
        qgcApp()->toolbox()->imageProvider()->setImage(&img, _id);
        _flowImageIndex++;
        emit flowImageIndexChanged();
    }
}

void Vehicle::_remoteControlRSSIChanged(uint8_t rssi)
{
    if (_rcRSSIstore < 0 || _rcRSSIstore > 100) {
        _rcRSSIstore = rssi;
    }

    // Low pass to git rid of jitter
    _rcRSSIstore = (_rcRSSIstore * 0.9f) + ((float)rssi * 0.1);
    uint8_t filteredRSSI = (uint8_t)ceil(_rcRSSIstore);
    if(_rcRSSIstore < 0.1) {
        filteredRSSI = 0;
    }
    if(_rcRSSI != filteredRSSI) {
        _rcRSSI = filteredRSSI;
        emit rcRSSIChanged(_rcRSSI);
    }
}

void Vehicle::virtualTabletJoystickValue(double roll, double pitch, double yaw, double thrust)
{
    // The following if statement prevents the virtualTabletJoystick from sending values if the standard joystick is enabled
    if ( !_joystickEnabled ) {
        _uas->setExternalControlSetpoint(roll, pitch, yaw, thrust, 0, JoystickModeRC);
    }
}

void Vehicle::setConnectionLostEnabled(bool connectionLostEnabled)
{
    if (_connectionLostEnabled != connectionLostEnabled) {
        _connectionLostEnabled = connectionLostEnabled;
        emit connectionLostEnabledChanged(_connectionLostEnabled);
    }
}

void Vehicle::_connectionLostTimeout(void)
{
    if (_connectionLostEnabled && !_connectionLost) {
        _connectionLost = true;
        _heardFrom = false;
        emit connectionLostChanged(true);
        _say(QString("%1 communication lost").arg(_vehicleIdSpeech()));
        if (_autoDisconnect) {
            disconnectInactiveVehicle();
        }
    }
}

void Vehicle::_connectionActive(void)
{
    _connectionLostTimer.start();
    if (_connectionLost) {
        _connectionLost = false;
        emit connectionLostChanged(false);
        _say(QString("%1 communication regained").arg(_vehicleIdSpeech()));
    }
}

void Vehicle::_say(const QString& text)
{
    qgcApp()->toolbox()->audioOutput()->say(text.toLower());
}

bool Vehicle::fixedWing(void) const
{
    return QGCMAVLink::isFixedWing(vehicleType());
}

bool Vehicle::rover(void) const
{
    return QGCMAVLink::isRover(vehicleType());
}

bool Vehicle::sub(void) const
{
    return QGCMAVLink::isSub(vehicleType());
}

bool Vehicle::multiRotor(void) const
{
    return QGCMAVLink::isMultiRotor(vehicleType());
}

bool Vehicle::vtol(void) const
{
    switch (vehicleType()) {
    case MAV_TYPE_VTOL_DUOROTOR:
    case MAV_TYPE_VTOL_QUADROTOR:
    case MAV_TYPE_VTOL_TILTROTOR:
    case MAV_TYPE_VTOL_RESERVED2:
    case MAV_TYPE_VTOL_RESERVED3:
    case MAV_TYPE_VTOL_RESERVED4:
    case MAV_TYPE_VTOL_RESERVED5:
        return true;
    default:
        return false;
    }
}

bool Vehicle::supportsManualControl(void) const
{
    return _firmwarePlugin->supportsManualControl();
}

bool Vehicle::supportsThrottleModeCenterZero(void) const
{
    return _firmwarePlugin->supportsThrottleModeCenterZero();
}

bool Vehicle::supportsRadio(void) const
{
    return _firmwarePlugin->supportsRadio();
}

bool Vehicle::supportsJSButton(void) const
{
    return _firmwarePlugin->supportsJSButton();
}

bool Vehicle::supportsCalibratePressure(void) const
{
    return _firmwarePlugin->supportsCalibratePressure();
}

bool Vehicle::supportsMotorInterference(void) const
{
    return _firmwarePlugin->supportsMotorInterference();
}

void Vehicle::_setCoordinateValid(bool coordinateValid)
{
    if (coordinateValid != _coordinateValid) {
        _coordinateValid = coordinateValid;
        emit coordinateValidChanged(_coordinateValid);
    }
}

QString Vehicle::vehicleTypeName() const {
    static QMap<int, QString> typeNames = {
        { MAV_TYPE_GENERIC,         tr("Generic micro air vehicle" )},
        { MAV_TYPE_FIXED_WING,      tr("Fixed wing aircraft")},
        { MAV_TYPE_QUADROTOR,       tr("Quadrotor")},
        { MAV_TYPE_COAXIAL,         tr("Coaxial helicopter")},
        { MAV_TYPE_HELICOPTER,      tr("Normal helicopter with tail rotor.")},
        { MAV_TYPE_ANTENNA_TRACKER, tr("Ground installation")},
        { MAV_TYPE_GCS,             tr("Operator control unit / ground control station")},
        { MAV_TYPE_AIRSHIP,         tr("Airship, controlled")},
        { MAV_TYPE_FREE_BALLOON,    tr("Free balloon, uncontrolled")},
        { MAV_TYPE_ROCKET,          tr("Rocket")},
        { MAV_TYPE_GROUND_ROVER,    tr("Ground rover")},
        { MAV_TYPE_SURFACE_BOAT,    tr("Surface vessel, boat, ship")},
        { MAV_TYPE_SUBMARINE,       tr("Submarine")},
        { MAV_TYPE_HEXAROTOR,       tr("Hexarotor")},
        { MAV_TYPE_OCTOROTOR,       tr("Octorotor")},
        { MAV_TYPE_TRICOPTER,       tr("Octorotor")},
        { MAV_TYPE_FLAPPING_WING,   tr("Flapping wing")},
        { MAV_TYPE_KITE,            tr("Flapping wing")},
        { MAV_TYPE_ONBOARD_CONTROLLER, tr("Onboard companion controller")},
        { MAV_TYPE_VTOL_DUOROTOR,   tr("Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter")},
        { MAV_TYPE_VTOL_QUADROTOR,  tr("Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter")},
        { MAV_TYPE_VTOL_TILTROTOR,  tr("Tiltrotor VTOL")},
        { MAV_TYPE_VTOL_RESERVED2,  tr("VTOL reserved 2")},
        { MAV_TYPE_VTOL_RESERVED3,  tr("VTOL reserved 3")},
        { MAV_TYPE_VTOL_RESERVED4,  tr("VTOL reserved 4")},
        { MAV_TYPE_VTOL_RESERVED5,  tr("VTOL reserved 5")},
        { MAV_TYPE_GIMBAL,          tr("Onboard gimbal")},
        { MAV_TYPE_ADSB,            tr("Onboard ADSB peripheral")},
    };
    return typeNames[_vehicleType];
}

/// Returns the string to speak to identify the vehicle
QString Vehicle::_vehicleIdSpeech(void)
{
    if (qgcApp()->toolbox()->multiVehicleManager()->vehicles()->count() > 1) {
        return QString("vehicle %1").arg(id());
    } else {
        return QString();
    }
}

void Vehicle::_handleFlightModeChanged(const QString& flightMode)
{
    _say(QString("%1 %2 flight mode").arg(_vehicleIdSpeech()).arg(flightMode));
    emit guidedModeChanged(_firmwarePlugin->isGuidedMode(this));
}

void Vehicle::_announceArmedChanged(bool armed)
{
    _say(QString("%1 %2").arg(_vehicleIdSpeech()).arg(armed ? QStringLiteral("armed") : QStringLiteral("disarmed")));
}

void Vehicle::clearTrajectoryPoints(void)
{
    _mapTrajectoryList.clearAndDeleteContents();
}

void Vehicle::setFlying(bool flying)
{
    if (armed() && _flying != flying) {
        _flying = flying;
        emit flyingChanged(flying);
    }
}

bool Vehicle::guidedModeSupported(void) const
{
    return _firmwarePlugin->isCapable(this, FirmwarePlugin::GuidedModeCapability);
}

bool Vehicle::pauseVehicleSupported(void) const
{
    return _firmwarePlugin->isCapable(this, FirmwarePlugin::PauseVehicleCapability);
}

bool Vehicle::orbitModeSupported() const
{
    return _firmwarePlugin->isCapable(this, FirmwarePlugin::OrbitModeCapability);
}

void Vehicle::guidedModeRTL(void)
{
    if (!guidedModeSupported()) {
        qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
        return;
    }
    _firmwarePlugin->guidedModeRTL(this);
}

void Vehicle::guidedModeLand(void)
{
    if (!guidedModeSupported()) {
        qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
        return;
    }
    _firmwarePlugin->guidedModeLand(this);
}

void Vehicle::guidedModeTakeoff(void)
{
    if (!guidedModeSupported()) {
        qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
        return;
    }
    setGuidedMode(true);
    _firmwarePlugin->guidedModeTakeoff(this);
}

void Vehicle::startMission(void)
{
    _firmwarePlugin->startMission(this);
}

void Vehicle::guidedModeGotoLocation(const QGeoCoordinate& gotoCoord)
{
    if (!guidedModeSupported()) {
        qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
        return;
    }
    _firmwarePlugin->guidedModeGotoLocation(this, gotoCoord);
}

void Vehicle::guidedModeChangeAltitude(double altitudeRel)
{
    if (!guidedModeSupported()) {
        qgcApp()->showMessage(guided_mode_not_supported_by_vehicle);
        return;
    }
    _firmwarePlugin->guidedModeChangeAltitude(this, altitudeRel);
}

void Vehicle::guidedModeOrbit(const QGeoCoordinate& centerCoord, double radius, double velocity, double altitude)
{
    if (!orbitModeSupported()) {
        qgcApp()->showMessage(QStringLiteral("Orbit mode not supported by Vehicle."));