Vehicle.cc

    mavlink_vfr_hud_t vfrHud;
    mavlink_msg_vfr_hud_decode(&message, &vfrHud);

    _airSpeedFact.setRawValue(qIsNaN(vfrHud.airspeed) ? 0 : vfrHud.airspeed);
    _groundSpeedFact.setRawValue(qIsNaN(vfrHud.groundspeed) ? 0 : vfrHud.groundspeed);
    _climbRateFact.setRawValue(qIsNaN(vfrHud.climb) ? 0 : vfrHud.climb);
    _throttlePctFact.setRawValue(static_cast<int16_t>(vfrHud.throttle));
}

void Vehicle::_handleEstimatorStatus(mavlink_message_t& message)
{
    mavlink_estimator_status_t estimatorStatus;
    mavlink_msg_estimator_status_decode(&message, &estimatorStatus);

    _estimatorStatusFactGroup.goodAttitudeEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_ATTITUDE));
    _estimatorStatusFactGroup.goodHorizVelEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_VELOCITY_HORIZ));
    _estimatorStatusFactGroup.goodVertVelEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_VELOCITY_VERT));
    _estimatorStatusFactGroup.goodHorizPosRelEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_POS_HORIZ_REL));
    _estimatorStatusFactGroup.goodHorizPosAbsEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_POS_HORIZ_ABS));
    _estimatorStatusFactGroup.goodVertPosAbsEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_POS_VERT_ABS));
    _estimatorStatusFactGroup.goodVertPosAGLEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_POS_VERT_AGL));
    _estimatorStatusFactGroup.goodConstPosModeEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_CONST_POS_MODE));
    _estimatorStatusFactGroup.goodPredHorizPosRelEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_PRED_POS_HORIZ_REL));
    _estimatorStatusFactGroup.goodPredHorizPosAbsEstimate()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_PRED_POS_HORIZ_ABS));
    _estimatorStatusFactGroup.gpsGlitch()->setRawValue(estimatorStatus.flags & ESTIMATOR_GPS_GLITCH ? true : false);
    _estimatorStatusFactGroup.accelError()->setRawValue(!!(estimatorStatus.flags & ESTIMATOR_ACCEL_ERROR));
    _estimatorStatusFactGroup.velRatio()->setRawValue(estimatorStatus.vel_ratio);
    _estimatorStatusFactGroup.horizPosRatio()->setRawValue(estimatorStatus.pos_horiz_ratio);
    _estimatorStatusFactGroup.vertPosRatio()->setRawValue(estimatorStatus.pos_vert_ratio);
    _estimatorStatusFactGroup.magRatio()->setRawValue(estimatorStatus.mag_ratio);
    _estimatorStatusFactGroup.haglRatio()->setRawValue(estimatorStatus.hagl_ratio);
    _estimatorStatusFactGroup.tasRatio()->setRawValue(estimatorStatus.tas_ratio);
    _estimatorStatusFactGroup.horizPosAccuracy()->setRawValue(estimatorStatus.pos_horiz_accuracy);
    _estimatorStatusFactGroup.vertPosAccuracy()->setRawValue(estimatorStatus.pos_vert_accuracy);

#if 0
    typedef enum ESTIMATOR_STATUS_FLAGS
    {
       ESTIMATOR_ATTITUDE=1, /* True if the attitude estimate is good | */
       ESTIMATOR_VELOCITY_HORIZ=2, /* True if the horizontal velocity estimate is good | */
       ESTIMATOR_VELOCITY_VERT=4, /* True if the  vertical velocity estimate is good | */
       ESTIMATOR_POS_HORIZ_REL=8, /* True if the horizontal position (relative) estimate is good | */
       ESTIMATOR_POS_HORIZ_ABS=16, /* True if the horizontal position (absolute) estimate is good | */
       ESTIMATOR_POS_VERT_ABS=32, /* True if the vertical position (absolute) estimate is good | */
       ESTIMATOR_POS_VERT_AGL=64, /* True if the vertical position (above ground) estimate is good | */
       ESTIMATOR_CONST_POS_MODE=128, /* True if the EKF is in a constant position mode and is not using external measurements (eg GPS or optical flow) | */
       ESTIMATOR_PRED_POS_HORIZ_REL=256, /* True if the EKF has sufficient data to enter a mode that will provide a (relative) position estimate | */
       ESTIMATOR_PRED_POS_HORIZ_ABS=512, /* True if the EKF has sufficient data to enter a mode that will provide a (absolute) position estimate | */
       ESTIMATOR_GPS_GLITCH=1024, /* True if the EKF has detected a GPS glitch | */
       ESTIMATOR_ACCEL_ERROR=2048, /* True if the EKF has detected bad accelerometer data | */

        typedef struct __mavlink_estimator_status_t {
         uint64_t time_usec; /*< Timestamp (micros since boot or Unix epoch)*/
         float vel_ratio; /*< Velocity innovation test ratio*/
         float pos_horiz_ratio; /*< Horizontal position innovation test ratio*/
         float pos_vert_ratio; /*< Vertical position innovation test ratio*/
         float mag_ratio; /*< Magnetometer innovation test ratio*/
         float hagl_ratio; /*< Height above terrain innovation test ratio*/
         float tas_ratio; /*< True airspeed innovation test ratio*/
         float pos_horiz_accuracy; /*< Horizontal position 1-STD accuracy relative to the EKF local origin (m)*/
         float pos_vert_accuracy; /*< Vertical position 1-STD accuracy relative to the EKF local origin (m)*/
         uint16_t flags; /*< Integer bitmask indicating which EKF outputs are valid. See definition for ESTIMATOR_STATUS_FLAGS.*/
        } mavlink_estimator_status_t;
    };
#endif
}

void Vehicle::_handleDistanceSensor(mavlink_message_t& message)
{
    mavlink_distance_sensor_t distanceSensor;

    mavlink_msg_distance_sensor_decode(&message, &distanceSensor);

    struct orientation2Fact_s {
        MAV_SENSOR_ORIENTATION  orientation;
        Fact*                   fact;
    };

    orientation2Fact_s rgOrientation2Fact[] =
    {
        { MAV_SENSOR_ROTATION_NONE,         _distanceSensorFactGroup.rotationNone() },
        { MAV_SENSOR_ROTATION_YAW_45,       _distanceSensorFactGroup.rotationYaw45() },
        { MAV_SENSOR_ROTATION_YAW_90,       _distanceSensorFactGroup.rotationYaw90() },
        { MAV_SENSOR_ROTATION_YAW_135,      _distanceSensorFactGroup.rotationYaw135() },
        { MAV_SENSOR_ROTATION_YAW_180,      _distanceSensorFactGroup.rotationYaw180() },
        { MAV_SENSOR_ROTATION_YAW_225,      _distanceSensorFactGroup.rotationYaw225() },
        { MAV_SENSOR_ROTATION_YAW_270,      _distanceSensorFactGroup.rotationYaw270() },
        { MAV_SENSOR_ROTATION_YAW_315,      _distanceSensorFactGroup.rotationYaw315() },
        { MAV_SENSOR_ROTATION_PITCH_90,     _distanceSensorFactGroup.rotationPitch90() },
        { MAV_SENSOR_ROTATION_PITCH_270,    _distanceSensorFactGroup.rotationPitch270() },
    };

    for (size_t i=0; i<sizeof(rgOrientation2Fact)/sizeof(rgOrientation2Fact[0]); i++) {
        const orientation2Fact_s& orientation2Fact = rgOrientation2Fact[i];
        if (orientation2Fact.orientation == distanceSensor.orientation) {
            orientation2Fact.fact->setRawValue(distanceSensor.current_distance / 100.0); // cm to meters
        }
    }
}

void Vehicle::_handleAttitudeTarget(mavlink_message_t& message)
{
    mavlink_attitude_target_t attitudeTarget;

    mavlink_msg_attitude_target_decode(&message, &attitudeTarget);

    float roll, pitch, yaw;
    mavlink_quaternion_to_euler(attitudeTarget.q, &roll, &pitch, &yaw);

    _setpointFactGroup.roll()->setRawValue(qRadiansToDegrees(roll));
    _setpointFactGroup.pitch()->setRawValue(qRadiansToDegrees(pitch));
    _setpointFactGroup.yaw()->setRawValue(qRadiansToDegrees(yaw));

    _setpointFactGroup.rollRate()->setRawValue(qRadiansToDegrees(attitudeTarget.body_roll_rate));
    _setpointFactGroup.pitchRate()->setRawValue(qRadiansToDegrees(attitudeTarget.body_pitch_rate));
    _setpointFactGroup.yawRate()->setRawValue(qRadiansToDegrees(attitudeTarget.body_yaw_rate));
}

void Vehicle::_handleAttitudeWorker(double rollRadians, double pitchRadians, double yawRadians)
{
    double roll, pitch, yaw;

    roll = QGC::limitAngleToPMPIf(rollRadians);
    pitch = QGC::limitAngleToPMPIf(pitchRadians);
    yaw = QGC::limitAngleToPMPIf(yawRadians);

    roll = qRadiansToDegrees(roll);
    pitch = qRadiansToDegrees(pitch);
    yaw = qRadiansToDegrees(yaw);

    if (yaw < 0.0) {
        yaw += 360.0;
    }
    // truncate to integer so widget never displays 360
    yaw = trunc(yaw);

    _rollFact.setRawValue(roll);
    _pitchFact.setRawValue(pitch);
    _headingFact.setRawValue(yaw);
}

void Vehicle::_handleAttitude(mavlink_message_t& message)
{
    if (_receivingAttitudeQuaternion) {
        return;
    }

    mavlink_attitude_t attitude;
    mavlink_msg_attitude_decode(&message, &attitude);

    _handleAttitudeWorker(attitude.roll, attitude.pitch, attitude.yaw);
}

void Vehicle::_handleAttitudeQuaternion(mavlink_message_t& message)
{
    _receivingAttitudeQuaternion = true;

    mavlink_attitude_quaternion_t attitudeQuaternion;
    mavlink_msg_attitude_quaternion_decode(&message, &attitudeQuaternion);

    Eigen::Quaternionf quat(attitudeQuaternion.q1, attitudeQuaternion.q2, attitudeQuaternion.q3, attitudeQuaternion.q4);
    Eigen::Vector3f rates(attitudeQuaternion.rollspeed, attitudeQuaternion.pitchspeed, attitudeQuaternion.yawspeed);
    Eigen::Quaternionf repr_offset(attitudeQuaternion.repr_offset_q[0], attitudeQuaternion.repr_offset_q[1], attitudeQuaternion.repr_offset_q[2], attitudeQuaternion.repr_offset_q[3]);

    // if repr_offset is valid, rotate attitude and rates
    if (repr_offset.norm() >= 0.5f) {
        quat = quat * repr_offset;
        rates = repr_offset * rates;
    }

    float roll, pitch, yaw;
    float q[] = { quat.w(), quat.x(), quat.y(), quat.z() };
    mavlink_quaternion_to_euler(q, &roll, &pitch, &yaw);

    _handleAttitudeWorker(roll, pitch, yaw);

    rollRate()->setRawValue(qRadiansToDegrees(rates[0]));
    pitchRate()->setRawValue(qRadiansToDegrees(rates[1]));
    yawRate()->setRawValue(qRadiansToDegrees(rates[2]));
}

void Vehicle::_handleGpsRawInt(mavlink_message_t& message)
{
    mavlink_gps_raw_int_t gpsRawInt;
    mavlink_msg_gps_raw_int_decode(&message, &gpsRawInt);

    _gpsRawIntMessageAvailable = true;

    if (gpsRawInt.fix_type >= GPS_FIX_TYPE_3D_FIX) {
        if (!_globalPositionIntMessageAvailable) {
            QGeoCoordinate newPosition(gpsRawInt.lat  / (double)1E7, gpsRawInt.lon / (double)1E7, gpsRawInt.alt  / 1000.0);
            if (newPosition != _coordinate) {
                _coordinate = newPosition;
                emit coordinateChanged(_coordinate);
            }
            _altitudeAMSLFact.setRawValue(gpsRawInt.alt / 1000.0);
        }
    }

    _gpsFactGroup.lat()->setRawValue(gpsRawInt.lat * 1e-7);
    _gpsFactGroup.lon()->setRawValue(gpsRawInt.lon * 1e-7);
    _gpsFactGroup.mgrs()->setRawValue(convertGeoToMGRS(QGeoCoordinate(gpsRawInt.lat * 1e-7, gpsRawInt.lon * 1e-7)));
    _gpsFactGroup.count()->setRawValue(gpsRawInt.satellites_visible == 255 ? 0 : gpsRawInt.satellites_visible);
    _gpsFactGroup.hdop()->setRawValue(gpsRawInt.eph == UINT16_MAX ? std::numeric_limits<double>::quiet_NaN() : gpsRawInt.eph / 100.0);
    _gpsFactGroup.vdop()->setRawValue(gpsRawInt.epv == UINT16_MAX ? std::numeric_limits<double>::quiet_NaN() : gpsRawInt.epv / 100.0);
    _gpsFactGroup.courseOverGround()->setRawValue(gpsRawInt.cog == UINT16_MAX ? std::numeric_limits<double>::quiet_NaN() : gpsRawInt.cog / 100.0);
    _gpsFactGroup.lock()->setRawValue(gpsRawInt.fix_type);
}

void Vehicle::_handleGlobalPositionInt(mavlink_message_t& message)
{
    mavlink_global_position_int_t globalPositionInt;
    mavlink_msg_global_position_int_decode(&message, &globalPositionInt);

    _altitudeRelativeFact.setRawValue(globalPositionInt.relative_alt / 1000.0);
    _altitudeAMSLFact.setRawValue(globalPositionInt.alt / 1000.0);

    // ArduPilot sends bogus GLOBAL_POSITION_INT messages with lat/lat 0/0 even when it has no gps signal
    // Apparently, this is in order to transport relative altitude information.
    if (globalPositionInt.lat == 0 && globalPositionInt.lon == 0) {
        return;
    }

    _globalPositionIntMessageAvailable = true;
    QGeoCoordinate newPosition(globalPositionInt.lat  / (double)1E7, globalPositionInt.lon / (double)1E7, globalPositionInt.alt  / 1000.0);
    if (newPosition != _coordinate) {
        _coordinate = newPosition;
        emit coordinateChanged(_coordinate);
    }
}

void Vehicle::_handleHighLatency2(mavlink_message_t& message)
{
    mavlink_high_latency2_t highLatency2;
    mavlink_msg_high_latency2_decode(&message, &highLatency2);

    QString previousFlightMode;
    if (_base_mode != 0 || _custom_mode != 0){
        // Vehicle is initialized with _base_mode=0 and _custom_mode=0. Don't pass this to flightMode() since it will complain about
        // bad modes while unit testing.
        previousFlightMode = flightMode();
    }
    _base_mode = MAV_MODE_FLAG_CUSTOM_MODE_ENABLED;
    _custom_mode = _firmwarePlugin->highLatencyCustomModeTo32Bits(highLatency2.custom_mode);
    if (previousFlightMode != flightMode()) {
        emit flightModeChanged(flightMode());
    }

    // Assume armed since we don't know
    if (_armed != true) {
        _armed = true;
        emit armedChanged(_armed);
    }

    _coordinate.setLatitude(highLatency2.latitude  / (double)1E7);
    _coordinate.setLongitude(highLatency2.longitude / (double)1E7);
    _coordinate.setAltitude(highLatency2.altitude);
    emit coordinateChanged(_coordinate);

    _airSpeedFact.setRawValue((double)highLatency2.airspeed / 5.0);
    _groundSpeedFact.setRawValue((double)highLatency2.groundspeed / 5.0);
    _climbRateFact.setRawValue((double)highLatency2.climb_rate / 10.0);
    _headingFact.setRawValue((double)highLatency2.heading * 2.0);
    _altitudeRelativeFact.setRawValue(std::numeric_limits<double>::quiet_NaN());
    _altitudeAMSLFact.setRawValue(highLatency2.altitude);

    _windFactGroup.direction()->setRawValue((double)highLatency2.wind_heading * 2.0);
    _windFactGroup.speed()->setRawValue((double)highLatency2.windspeed / 5.0);

    _battery1FactGroup.percentRemaining()->setRawValue(highLatency2.battery);

    _temperatureFactGroup.temperature1()->setRawValue(highLatency2.temperature_air);

    _gpsFactGroup.lat()->setRawValue(highLatency2.latitude * 1e-7);
    _gpsFactGroup.lon()->setRawValue(highLatency2.longitude * 1e-7);
    _gpsFactGroup.mgrs()->setRawValue(convertGeoToMGRS(QGeoCoordinate(highLatency2.latitude * 1e-7, highLatency2.longitude * 1e-7)));
    _gpsFactGroup.count()->setRawValue(0);
    _gpsFactGroup.hdop()->setRawValue(highLatency2.eph == UINT8_MAX ? std::numeric_limits<double>::quiet_NaN() : highLatency2.eph / 10.0);
    _gpsFactGroup.vdop()->setRawValue(highLatency2.epv == UINT8_MAX ? std::numeric_limits<double>::quiet_NaN() : highLatency2.epv / 10.0);

    struct failure2Sensor_s {
        HL_FAILURE_FLAG         failureBit;
        MAV_SYS_STATUS_SENSOR   sensorBit;
    };

    static const failure2Sensor_s rgFailure2Sensor[] = {
        { HL_FAILURE_FLAG_GPS,                      MAV_SYS_STATUS_SENSOR_GPS },
        { HL_FAILURE_FLAG_DIFFERENTIAL_PRESSURE,    MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE },
        { HL_FAILURE_FLAG_ABSOLUTE_PRESSURE,        MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE },
        { HL_FAILURE_FLAG_3D_ACCEL,                 MAV_SYS_STATUS_SENSOR_3D_ACCEL },
        { HL_FAILURE_FLAG_3D_GYRO,                  MAV_SYS_STATUS_SENSOR_3D_GYRO },
        { HL_FAILURE_FLAG_3D_MAG,                   MAV_SYS_STATUS_SENSOR_3D_MAG },
    };

    // Map from MAV_FAILURE bits to standard SYS_STATUS message handling
    uint32_t newOnboardControlSensorsEnabled = 0;
    for (size_t i=0; i<sizeof(rgFailure2Sensor)/sizeof(failure2Sensor_s); i++) {
        const failure2Sensor_s* pFailure2Sensor = &rgFailure2Sensor[i];
        if (highLatency2.failure_flags & pFailure2Sensor->failureBit) {
            // Assume if reporting as unhealthy that is it present and enabled
            newOnboardControlSensorsEnabled |= pFailure2Sensor->sensorBit;
        }
    }
    if (newOnboardControlSensorsEnabled != _onboardControlSensorsEnabled) {
        _onboardControlSensorsEnabled = newOnboardControlSensorsEnabled;
        _onboardControlSensorsPresent = newOnboardControlSensorsEnabled;
        _onboardControlSensorsUnhealthy = 0;
        emit unhealthySensorsChanged();
    }
}

void Vehicle::_handleAltitude(mavlink_message_t& message)
{
    mavlink_altitude_t altitude;
    mavlink_msg_altitude_decode(&message, &altitude);

    // If data from GPS is available it takes precedence over ALTITUDE message
    if (!_globalPositionIntMessageAvailable) {
        _altitudeRelativeFact.setRawValue(altitude.altitude_relative);
        if (!_gpsRawIntMessageAvailable) {
            _altitudeAMSLFact.setRawValue(altitude.altitude_amsl);
        }
    }
}

void Vehicle::_setCapabilities(uint64_t capabilityBits)
{
    _capabilityBits = capabilityBits;
    _capabilityBitsKnown = true;
    emit capabilitiesKnownChanged(true);
    emit capabilityBitsChanged(_capabilityBits);

    QString supports("supports");
    QString doesNotSupport("does not support");

    qCDebug(VehicleLog) << QString("Vehicle %1 Mavlink 2.0").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_MAVLINK2 ? supports : doesNotSupport);
    qCDebug(VehicleLog) << QString("Vehicle %1 MISSION_ITEM_INT").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_MISSION_INT ? supports : doesNotSupport);
    qCDebug(VehicleLog) << QString("Vehicle %1 MISSION_COMMAND_INT").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_COMMAND_INT ? supports : doesNotSupport);
    qCDebug(VehicleLog) << QString("Vehicle %1 GeoFence").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_MISSION_FENCE ? supports : doesNotSupport);
    qCDebug(VehicleLog) << QString("Vehicle %1 RallyPoints").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_MISSION_RALLY ? supports : doesNotSupport);
    qCDebug(VehicleLog) << QString("Vehicle %1 Terrain").arg(_capabilityBits & MAV_PROTOCOL_CAPABILITY_TERRAIN ? supports : doesNotSupport);

    _setMaxProtoVersionFromBothSources();
}

void Vehicle::_handleAutopilotVersion(LinkInterface *link, mavlink_message_t& message)
{
    Q_UNUSED(link);

    mavlink_autopilot_version_t autopilotVersion;
    mavlink_msg_autopilot_version_decode(&message, &autopilotVersion);

    _uid = (quint64)autopilotVersion.uid;
    emit vehicleUIDChanged();

    if (autopilotVersion.flight_sw_version != 0) {
        int majorVersion, minorVersion, patchVersion;
        FIRMWARE_VERSION_TYPE versionType;

        majorVersion = (autopilotVersion.flight_sw_version >> (8*3)) & 0xFF;
        minorVersion = (autopilotVersion.flight_sw_version >> (8*2)) & 0xFF;
        patchVersion = (autopilotVersion.flight_sw_version >> (8*1)) & 0xFF;
        versionType = (FIRMWARE_VERSION_TYPE)((autopilotVersion.flight_sw_version >> (8*0)) & 0xFF);
        setFirmwareVersion(majorVersion, minorVersion, patchVersion, versionType);
    }

    if (px4Firmware()) {
        // Lower 3 bytes is custom version
        int majorVersion, minorVersion, patchVersion;
        majorVersion = autopilotVersion.flight_custom_version[2];
        minorVersion = autopilotVersion.flight_custom_version[1];
        patchVersion = autopilotVersion.flight_custom_version[0];
        setFirmwareCustomVersion(majorVersion, minorVersion, patchVersion);

        // PX4 Firmware stores the first 16 characters of the git hash as binary, with the individual bytes in reverse order
        _gitHash = "";
        for (int i = 7; i >= 0; i--) {
            _gitHash.append(QString("%1").arg(autopilotVersion.flight_custom_version[i], 2, 16, QChar('0')));
        }
    } else {
        // APM Firmware stores the first 8 characters of the git hash as an ASCII character string
        char nullStr[9];
        strncpy(nullStr, (char*)autopilotVersion.flight_custom_version, 8);
        nullStr[8] = 0;
        _gitHash = nullStr;
    }
    if (_toolbox->corePlugin()->options()->checkFirmwareVersion() && !_checkLatestStableFWDone) {
        _checkLatestStableFWDone = true;
        _firmwarePlugin->checkIfIsLatestStable(this);
    }
    emit gitHashChanged(_gitHash);

    _setCapabilities(autopilotVersion.capabilities);
    _startPlanRequest();
}

void Vehicle::_handleProtocolVersion(LinkInterface *link, mavlink_message_t& message)
{
    Q_UNUSED(link);

    mavlink_protocol_version_t protoVersion;
    mavlink_msg_protocol_version_decode(&message, &protoVersion);

    qCDebug(VehicleLog) << "_handleProtocolVersion" << protoVersion.max_version;

    _mavlinkProtocolRequestMaxProtoVersion = protoVersion.max_version;
    _mavlinkProtocolRequestComplete = true;
    _setMaxProtoVersionFromBothSources();
    _startPlanRequest();
}

void Vehicle::_setMaxProtoVersion(unsigned version) {

    // Set only once or if we need to reduce the max version
    if (_maxProtoVersion == 0 || version < _maxProtoVersion) {
        qCDebug(VehicleLog) << "_setMaxProtoVersion before:after" << _maxProtoVersion << version;
        _maxProtoVersion = version;
        emit requestProtocolVersion(_maxProtoVersion);
    }
}

void Vehicle::_setMaxProtoVersionFromBothSources()
{
    if (_mavlinkProtocolRequestComplete && _capabilityBitsKnown) {
        if (_mavlinkProtocolRequestMaxProtoVersion != 0) {
            qCDebug(VehicleLog) << "_setMaxProtoVersionFromBothSources using protocol version message";
            _setMaxProtoVersion(_mavlinkProtocolRequestMaxProtoVersion);
        } else {
            qCDebug(VehicleLog) << "_setMaxProtoVersionFromBothSources using capability bits";
            _setMaxProtoVersion(capabilityBits() & MAV_PROTOCOL_CAPABILITY_MAVLINK2 ? 200 : 100);
        }
    }
}

QString Vehicle::vehicleUIDStr()
{
    QString uid;
    uint8_t* pUid = (uint8_t*)(void*)&_uid;
    uid.sprintf("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X",
                pUid[0] & 0xff,
            pUid[1] & 0xff,
            pUid[2] & 0xff,
            pUid[3] & 0xff,
            pUid[4] & 0xff,
            pUid[5] & 0xff,
            pUid[6] & 0xff,
            pUid[7] & 0xff);
    return uid;
}

void Vehicle::_handleCommandLong(mavlink_message_t& message)
{
#ifdef NO_SERIAL_LINK
    // If not using serial link, bail out.
    Q_UNUSED(message)
#else
    mavlink_command_long_t cmd;
    mavlink_msg_command_long_decode(&message, &cmd);

    switch (cmd.command) {
    // Other component on the same system
    // requests that QGC frees up the serial port of the autopilot
    case MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN:
        if (cmd.param6 > 0) {
            // disconnect the USB link if its a direct connection to a Pixhawk
            for (int i = 0; i < _links.length(); i++) {
                SerialLink *sl = qobject_cast<SerialLink*>(_links.at(i));
                if (sl && sl->getSerialConfig()->usbDirect()) {
                    qDebug() << "Disconnecting:" << _links.at(i)->getName();
                    qgcApp()->toolbox()->linkManager()->disconnectLink(_links.at(i));
                    emit linksChanged();
                }
            }
        }
        break;
    }
#endif
}

void Vehicle::_handleExtendedSysState(mavlink_message_t& message)
{
    mavlink_extended_sys_state_t extendedState;
    mavlink_msg_extended_sys_state_decode(&message, &extendedState);

    switch (extendedState.landed_state) {
    case MAV_LANDED_STATE_ON_GROUND:
        _setFlying(false);
        _setLanding(false);
        break;
    case MAV_LANDED_STATE_TAKEOFF:
    case MAV_LANDED_STATE_IN_AIR:
        _setFlying(true);
        _setLanding(false);
        break;
    case MAV_LANDED_STATE_LANDING:
        _setFlying(true);
        _setLanding(true);
        break;
    default:
        break;
    }

    if (vtol()) {
        bool vtolInFwdFlight = extendedState.vtol_state == MAV_VTOL_STATE_FW;
        if (vtolInFwdFlight != _vtolInFwdFlight) {
            _vtolInFwdFlight = vtolInFwdFlight;
            emit vtolInFwdFlightChanged(vtolInFwdFlight);
        }
    }
}

void Vehicle::_handleVibration(mavlink_message_t& message)
{
    mavlink_vibration_t vibration;
    mavlink_msg_vibration_decode(&message, &vibration);

    _vibrationFactGroup.xAxis()->setRawValue(vibration.vibration_x);
    _vibrationFactGroup.yAxis()->setRawValue(vibration.vibration_y);
    _vibrationFactGroup.zAxis()->setRawValue(vibration.vibration_z);
    _vibrationFactGroup.clipCount1()->setRawValue(vibration.clipping_0);
    _vibrationFactGroup.clipCount2()->setRawValue(vibration.clipping_1);
    _vibrationFactGroup.clipCount3()->setRawValue(vibration.clipping_2);
}

void Vehicle::_handleWindCov(mavlink_message_t& message)
{
    mavlink_wind_cov_t wind;
    mavlink_msg_wind_cov_decode(&message, &wind);

    float direction = qRadiansToDegrees(qAtan2(wind.wind_y, wind.wind_x));
    float speed = qSqrt(qPow(wind.wind_x, 2) + qPow(wind.wind_y, 2));

    if (direction < 0) {
        direction += 360;
    }

    _windFactGroup.direction()->setRawValue(direction);
    _windFactGroup.speed()->setRawValue(speed);
    _windFactGroup.verticalSpeed()->setRawValue(0);
}

#if !defined(NO_ARDUPILOT_DIALECT)
void Vehicle::_handleWind(mavlink_message_t& message)
{
    mavlink_wind_t wind;
    mavlink_msg_wind_decode(&message, &wind);

    // We don't want negative wind angles
    float direction = wind.direction;
    if (direction < 0) {
        direction += 360;
    }
    _windFactGroup.direction()->setRawValue(direction);
    _windFactGroup.speed()->setRawValue(wind.speed);
    _windFactGroup.verticalSpeed()->setRawValue(wind.speed_z);
}
#endif

bool Vehicle::_apmArmingNotRequired()
{
    QString armingRequireParam("ARMING_REQUIRE");
    return _parameterManager->parameterExists(FactSystem::defaultComponentId, armingRequireParam) &&
            _parameterManager->getParameter(FactSystem::defaultComponentId, armingRequireParam)->rawValue().toInt() == 0;
}

void Vehicle::_batteryStatusWorker(int batteryId, double voltage, double current, double batteryRemainingPct)
{
    VehicleBatteryFactGroup* pBatteryFactGroup = nullptr;
    if (batteryId == 0) {
        pBatteryFactGroup = &_battery1FactGroup;
    } else if (batteryId == 1) {
        pBatteryFactGroup = &_battery2FactGroup;
    } else {
        return;
    }

    pBatteryFactGroup->voltage()->setRawValue(voltage);
    pBatteryFactGroup->current()->setRawValue(current);
    pBatteryFactGroup->instantPower()->setRawValue(voltage * current);
    pBatteryFactGroup->percentRemaining()->setRawValue(batteryRemainingPct);

    //-- Low battery warning
    if (batteryId == 0 && !qIsNaN(batteryRemainingPct)) {
        int warnThreshold = _settingsManager->appSettings()->batteryPercentRemainingAnnounce()->rawValue().toInt();
        if (batteryRemainingPct < warnThreshold &&
                batteryRemainingPct < _lastAnnouncedLowBatteryPercent &&
                _lastBatteryAnnouncement.elapsed() > (batteryRemainingPct < warnThreshold * 0.5 ? 15000 : 30000)) {
            _say(tr("%1 low battery: %2 percent remaining").arg(_vehicleIdSpeech()).arg(static_cast<int>(batteryRemainingPct)));
            _lastBatteryAnnouncement.start();
            _lastAnnouncedLowBatteryPercent = static_cast<int>(batteryRemainingPct);
        }
    }
}

void Vehicle::_handleSysStatus(mavlink_message_t& message)
{
    mavlink_sys_status_t sysStatus;
    mavlink_msg_sys_status_decode(&message, &sysStatus);

    if (_onboardControlSensorsPresent != sysStatus.onboard_control_sensors_present) {
        _onboardControlSensorsPresent = sysStatus.onboard_control_sensors_present;
        emit sensorsPresentBitsChanged(_onboardControlSensorsPresent);
    }
    if (_onboardControlSensorsEnabled != sysStatus.onboard_control_sensors_enabled) {
        _onboardControlSensorsEnabled = sysStatus.onboard_control_sensors_enabled;
        emit sensorsEnabledBitsChanged(_onboardControlSensorsEnabled);
    }
    if (_onboardControlSensorsHealth != sysStatus.onboard_control_sensors_health) {
        _onboardControlSensorsHealth = sysStatus.onboard_control_sensors_health;
        emit sensorsHealthBitsChanged(_onboardControlSensorsHealth);
    }

    // ArduPilot firmare has a strange case when ARMING_REQUIRE=0. This means the vehicle is always armed but the motors are not
    // really powered up until the safety button is pressed. Because of this we can't depend on the heartbeat to tell us the true
    // armed (and dangerous) state. We must instead rely on SYS_STATUS telling us that the motors are enabled.
    if (apmFirmware() && _apmArmingNotRequired()) {
        _updateArmed(_onboardControlSensorsEnabled & MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS);
    }

    uint32_t newSensorsUnhealthy = _onboardControlSensorsEnabled & ~_onboardControlSensorsHealth;
    if (newSensorsUnhealthy != _onboardControlSensorsUnhealthy) {
        _onboardControlSensorsUnhealthy = newSensorsUnhealthy;
        emit unhealthySensorsChanged();
        emit sensorsUnhealthyBitsChanged(_onboardControlSensorsUnhealthy);
    }

    // BATTERY_STATUS is currently unreliable on PX4 stack so we rely on SYS_STATUS for partial battery 0 information to work around it
    _batteryStatusWorker(0 /* batteryId */,
                         sysStatus.voltage_battery == UINT16_MAX ? qQNaN() : static_cast<double>(sysStatus.voltage_battery) / 1000.0,
                         sysStatus.current_battery == -1 ? qQNaN() : static_cast<double>(sysStatus.current_battery) / 100.0,
                         sysStatus.battery_remaining == -1 ? qQNaN() : sysStatus.battery_remaining);
}

void Vehicle::_handleBatteryStatus(mavlink_message_t& message)
{
    mavlink_battery_status_t bat_status;
    mavlink_msg_battery_status_decode(&message, &bat_status);

    VehicleBatteryFactGroup* pBatteryFactGroup = nullptr;
    if (bat_status.id == 0) {
        pBatteryFactGroup = &_battery1FactGroup;
    } else if (bat_status.id == 1) {
        pBatteryFactGroup = &_battery2FactGroup;
    } else {
        return;
    }

    double voltage = qQNaN();
    for (int i=0; i<10; i++) {
        double cellVoltage = bat_status.voltages[i] == UINT16_MAX ? qQNaN() : static_cast<double>(bat_status.voltages[i]) / 1000.0;
        if (qIsNaN(cellVoltage)) {
            break;
        }
        if (i == 0) {
            voltage = cellVoltage;
        } else {
            voltage += cellVoltage;
        }
    }

    pBatteryFactGroup->temperature()->setRawValue(bat_status.temperature == INT16_MAX ? qQNaN() : static_cast<double>(bat_status.temperature) / 100.0);
    pBatteryFactGroup->mahConsumed()->setRawValue(bat_status.current_consumed == -1  ? qQNaN() : bat_status.current_consumed);
    pBatteryFactGroup->chargeState()->setRawValue(bat_status.charge_state);
    pBatteryFactGroup->timeRemaining()->setRawValue(bat_status.time_remaining == 0 ? qQNaN() : bat_status.time_remaining);

    // BATTERY_STATUS is currently unreliable on PX4 stack so we rely on SYS_STATUS for partial battery 0 information to work around it
    if (bat_status.id != 0) {
        _batteryStatusWorker(bat_status.id,
                             voltage,
                             bat_status.current_battery == -1 ? qQNaN() : (double)bat_status.current_battery / 100.0,
                             bat_status.battery_remaining == -1 ? qQNaN() : bat_status.battery_remaining);
    }
}

void Vehicle::_setHomePosition(QGeoCoordinate& homeCoord)
{
    if (homeCoord != _homePosition) {
        _homePosition = homeCoord;
        emit homePositionChanged(_homePosition);
    }
}

void Vehicle::_handleHomePosition(mavlink_message_t& message)
{
    mavlink_home_position_t homePos;

    mavlink_msg_home_position_decode(&message, &homePos);

    QGeoCoordinate newHomePosition (homePos.latitude / 10000000.0,
                                    homePos.longitude / 10000000.0,
                                    homePos.altitude / 1000.0);
    _setHomePosition(newHomePosition);
}

void Vehicle::_updateArmed(bool armed)
{
    if (_armed != armed) {
        _armed = armed;
        emit armedChanged(_armed);
        // We are transitioning to the armed state, begin tracking trajectory points for the map
        if (_armed) {
            _trajectoryPoints->start();
            _flightTimerStart();
            _clearCameraTriggerPoints();
            // Reset battery warning
            _lastAnnouncedLowBatteryPercent = 100;
        } else {
            _trajectoryPoints->stop();
            _flightTimerStop();
            // Also handle Video Streaming
            if(qgcApp()->toolbox()->videoManager()->videoReceiver()) {
                if(_settingsManager->videoSettings()->disableWhenDisarmed()->rawValue().toBool()) {
                    _settingsManager->videoSettings()->streamEnabled()->setRawValue(false);
                    qgcApp()->toolbox()->videoManager()->videoReceiver()->stop();
                }
            }
        }
    }
}

void Vehicle::_handlePing(LinkInterface* link, mavlink_message_t& message)
{
    mavlink_ping_t      ping;
    mavlink_message_t   msg;

    mavlink_msg_ping_decode(&message, &ping);
    mavlink_msg_ping_pack_chan(static_cast<uint8_t>(_mavlink->getSystemId()),
                               static_cast<uint8_t>(_mavlink->getComponentId()),
                               priorityLink()->mavlinkChannel(),
                               &msg,
                               ping.time_usec,
                               ping.seq,
                               message.sysid,
                               message.compid);
    sendMessageOnLink(link, msg);
}

void Vehicle::_handleHeartbeat(mavlink_message_t& message)
{
    if (message.compid != _defaultComponentId) {
        return;
    }

    mavlink_heartbeat_t heartbeat;

    mavlink_msg_heartbeat_decode(&message, &heartbeat);

    bool newArmed = heartbeat.base_mode & MAV_MODE_FLAG_DECODE_POSITION_SAFETY;

    // ArduPilot firmare has a strange case when ARMING_REQUIRE=0. This means the vehicle is always armed but the motors are not
    // really powered up until the safety button is pressed. Because of this we can't depend on the heartbeat to tell us the true
    // armed (and dangerous) state. We must instead rely on SYS_STATUS telling us that the motors are enabled.
    if (apmFirmware()) {
        if (!_apmArmingNotRequired() || !(_onboardControlSensorsPresent & MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS)) {
            // If ARMING_REQUIRE!=0 or we haven't seen motor output status yet we use the hearbeat info for armed
            _updateArmed(newArmed);
        }
    } else {
        // Non-ArduPilot always updates from armed state in heartbeat
        _updateArmed(newArmed);
    }

    if (heartbeat.base_mode != _base_mode || heartbeat.custom_mode != _custom_mode) {
        QString previousFlightMode;
        if (_base_mode != 0 || _custom_mode != 0){
            // Vehicle is initialized with _base_mode=0 and _custom_mode=0. Don't pass this to flightMode() since it will complain about
            // bad modes while unit testing.
            previousFlightMode = flightMode();
        }
        _base_mode   = heartbeat.base_mode;
        _custom_mode = heartbeat.custom_mode;
        if (previousFlightMode != flightMode()) {
            emit flightModeChanged(flightMode());
        }
    }
}

void Vehicle::_handleRadioStatus(mavlink_message_t& message)
{

    //-- Process telemetry status message
    mavlink_radio_status_t rstatus;
    mavlink_msg_radio_status_decode(&message, &rstatus);

    int rssi    = rstatus.rssi;
    int remrssi = rstatus.remrssi;
    int lnoise = (int)(int8_t)rstatus.noise;
    int rnoise = (int)(int8_t)rstatus.remnoise;
    //-- 3DR Si1k radio needs rssi fields to be converted to dBm
    if (message.sysid == '3' && message.compid == 'D') {
        /* Per the Si1K datasheet figure 23.25 and SI AN474 code
         * samples the relationship between the RSSI register
         * and received power is as follows:
         *
         *                       10
         * inputPower = rssi * ------ 127
         *                       19
         *
         * Additionally limit to the only realistic range [-120,0] dBm
         */
        rssi    = qMin(qMax(qRound(static_cast<qreal>(rssi)    / 1.9 - 127.0), - 120), 0);
        remrssi = qMin(qMax(qRound(static_cast<qreal>(remrssi) / 1.9 - 127.0), - 120), 0);
    } else {
        rssi    = (int)(int8_t)rstatus.rssi;
        remrssi = (int)(int8_t)rstatus.remrssi;
    }
    //-- Check for changes
    if(_telemetryLRSSI != rssi) {
        _telemetryLRSSI = rssi;
        emit telemetryLRSSIChanged(_telemetryLRSSI);
    }
    if(_telemetryRRSSI != remrssi) {
        _telemetryRRSSI = remrssi;
        emit telemetryRRSSIChanged(_telemetryRRSSI);
    }
    if(_telemetryRXErrors != rstatus.rxerrors) {
        _telemetryRXErrors = rstatus.rxerrors;
        emit telemetryRXErrorsChanged(_telemetryRXErrors);
    }
    if(_telemetryFixed != rstatus.fixed) {
        _telemetryFixed = rstatus.fixed;
        emit telemetryFixedChanged(_telemetryFixed);
    }
    if(_telemetryTXBuffer != rstatus.txbuf) {
        _telemetryTXBuffer = rstatus.txbuf;
        emit telemetryTXBufferChanged(_telemetryTXBuffer);
    }
    if(_telemetryLNoise != lnoise) {
        _telemetryLNoise = lnoise;
        emit telemetryLNoiseChanged(_telemetryLNoise);
    }
    if(_telemetryRNoise != rnoise) {
        _telemetryRNoise = rnoise;
        emit telemetryRNoiseChanged(_telemetryRNoise);
    }
}

void Vehicle::_handleRCChannels(mavlink_message_t& message)
{
    mavlink_rc_channels_t channels;

    mavlink_msg_rc_channels_decode(&message, &channels);

    uint16_t* _rgChannelvalues[cMaxRcChannels] = {
        &channels.chan1_raw,
        &channels.chan2_raw,
        &channels.chan3_raw,
        &channels.chan4_raw,
        &channels.chan5_raw,
        &channels.chan6_raw,
        &channels.chan7_raw,
        &channels.chan8_raw,
        &channels.chan9_raw,
        &channels.chan10_raw,
        &channels.chan11_raw,
        &channels.chan12_raw,
        &channels.chan13_raw,
        &channels.chan14_raw,
        &channels.chan15_raw,
        &channels.chan16_raw,
        &channels.chan17_raw,
        &channels.chan18_raw,
    };
    int pwmValues[cMaxRcChannels];

    for (int i=0; i<cMaxRcChannels; i++) {
        uint16_t channelValue = *_rgChannelvalues[i];

        if (i < channels.chancount) {
            pwmValues[i] = channelValue == UINT16_MAX ? -1 : channelValue;
        } else {
            pwmValues[i] = -1;
        }
    }

    emit remoteControlRSSIChanged(channels.rssi);
    emit rcChannelsChanged(channels.chancount, pwmValues);
}

void Vehicle::_handleRCChannelsRaw(mavlink_message_t& message)
{
    // We handle both RC_CHANNLES and RC_CHANNELS_RAW since different firmware will only
    // send one or the other.

    mavlink_rc_channels_raw_t channels;

    mavlink_msg_rc_channels_raw_decode(&message, &channels);

    uint16_t* _rgChannelvalues[cMaxRcChannels] = {
        &channels.chan1_raw,
        &channels.chan2_raw,
        &channels.chan3_raw,
        &channels.chan4_raw,
        &channels.chan5_raw,
        &channels.chan6_raw,
        &channels.chan7_raw,
        &channels.chan8_raw,
    };

    int pwmValues[cMaxRcChannels];
    int channelCount = 0;

    for (int i=0; i<cMaxRcChannels; i++) {
        pwmValues[i] = -1;
    }

    for (int i=0; i<8; i++) {
        uint16_t channelValue = *_rgChannelvalues[i];

        if (channelValue == UINT16_MAX) {
            pwmValues[i] = -1;
        } else {
            channelCount = i + 1;
            pwmValues[i] = channelValue;
        }
    }
    for (int i=9; i<18; i++) {
        pwmValues[i] = -1;
    }

    emit remoteControlRSSIChanged(channels.rssi);
    emit rcChannelsChanged(channelCount, pwmValues);
}

void Vehicle::_handleScaledPressure(mavlink_message_t& message) {
    mavlink_scaled_pressure_t pressure;
    mavlink_msg_scaled_pressure_decode(&message, &pressure);
    _temperatureFactGroup.temperature1()->setRawValue(pressure.temperature / 100.0);
}

void Vehicle::_handleScaledPressure2(mavlink_message_t& message) {
    mavlink_scaled_pressure2_t pressure;
    mavlink_msg_scaled_pressure2_decode(&message, &pressure);
    _temperatureFactGroup.temperature2()->setRawValue(pressure.temperature / 100.0);
}

void Vehicle::_handleScaledPressure3(mavlink_message_t& message) {
    mavlink_scaled_pressure3_t pressure;
    mavlink_msg_scaled_pressure3_decode(&message, &pressure);
    _temperatureFactGroup.temperature3()->setRawValue(pressure.temperature / 100.0);
}

bool Vehicle::_containsLink(LinkInterface* link)
{
    return _links.contains(link);
}

void Vehicle::_addLink(LinkInterface* link)
{
    if (!_containsLink(link)) {
        qCDebug(VehicleLog) << "_addLink:" << QString("%1").arg((qulonglong)link, 0, 16);
        _links += link;
        if (_links.count() <= 1) {
            _updatePriorityLink(true /* updateActive */, false /* sendCommand */);
        } else {
            _updatePriorityLink(true /* updateActive */, true /* sendCommand */);
        }

        connect(_toolbox->linkManager(), &LinkManager::linkInactive, this, &Vehicle::_linkInactiveOrDeleted);
        connect(_toolbox->linkManager(), &LinkManager::linkDeleted, this, &Vehicle::_linkInactiveOrDeleted);
        connect(link, &LinkInterface::highLatencyChanged, this, &Vehicle::_updateHighLatencyLink);
        connect(link, &LinkInterface::activeChanged, this, &Vehicle::_linkActiveChanged);
    }
}

void Vehicle::_linkInactiveOrDeleted(LinkInterface* link)
{
    qCDebug(VehicleLog) << "_linkInactiveOrDeleted linkCount" << _links.count();

    _links.removeOne(link);

    _updatePriorityLink(true /* updateActive */, true /* sendCommand */);

    if (_links.count() == 0 && !_allLinksInactiveSent) {
        qCDebug(VehicleLog) << "All links inactive";
        // Make sure to not send this more than one time
        _allLinksInactiveSent = true;
        emit allLinksInactive(this);
    }
}

bool Vehicle::sendMessageOnLink(LinkInterface* link, mavlink_message_t message)
{
    if (!link || !_links.contains(link) || !link->isConnected()) {
        return false;
    }

    emit _sendMessageOnLinkOnThread(link, message);

    return true;
}

void Vehicle::_sendMessageOnLink(LinkInterface* link, mavlink_message_t message)
{
    // Make sure this is still a good link
    if (!link || !_links.contains(link) || !link->isConnected()) {
        return;
    }

#if 0