Have settings loaded/stored correctly for all joysticks based on their UAS type and autopilot type. Switching between UASes doesn't work right yet, however.

The default UAS.cc now lists available actions that it can be commanded. These are polled by the Joystick Configuration window for each joystick button so that they can be assigned to trigger this action. Button presses don't yet trigger these actions, nor are they stored and reloaded on UAS switch.

The settings for each joystick are loaded and saved on switch. The state of the enable joysticks checkbox is not saved yet, however, though it should really be tracked by JoystickInput so that it can sleep more when joysticks are disabled.

Restored range limiting to the throttle channel. Now if the UAS can't reverse, the throttle can be set to only use the positive range of the axis (useful with auto-centering control sticks) or to use the full range (for sticks that hold position).

Conflicts:
	src/input/JoystickInput.cc
	src/input/JoystickInput.h
	src/ui/JoystickAxis.cc
	src/ui/JoystickAxis.h
	src/ui/JoystickAxis.ui
	src/ui/JoystickWidget.cc

The joystick code now understands if a UAS can reverse or not (based on UASInterface::systemCanReverse) and scales the joystick input accordingly. This isn't ideal on auto-centering axes and so the limit-range code should be brought back as an option for the throttle channel.

The UASInterface now defines a systemCanReverse() function for indicating if the UAS is capable of commanding a reverse thrust.

Joystick axes can now be specified as being exclusively-positive in the range [0:1.0] for the throttle. This should really be a vehicle-specific setting.

The UI now updates properly for when a detected joystick is lacking either buttons or axes (as in the case of an in-built accelerometer).

Added an inversion checkbox for each joystick axis so they can be individually inverted or not. This will be a joystick-specific configuration and independent of the autopilot used. Also refactored the code so that the JoystickAxis objects connect directly to the JoystickInput thread for updating the backend. The JoystickWidget is now just a facilitator and doesn't do any redirecting itself.

The button/axis/hat readings are now compared to the previous readings and signals are only emitted if they changed. The joystickChanged signal is still emitted every sample period.

The hat readings from the joystick now works correctly. Also moved some signals over to using an enum from an int type.

Moved the JOYSTICK_*_MAPPING enum into JoystickInput where it belongs. Also renamed some local variables.

Refactored some variables and added some documentation. Also, now the joystickChanged signal emits NaN for axes that aren't mapped, so consumers should handle this properly.

Refactored much of the joystick interface with the largest changes being the removal of dead/unused code including broken event-based SDL reading code. Additionally the mapping code should now work, though it hasn't been tested with controller switching or a real UAS. Finally the existing settings code has been commented-out as it is not compatible with the current state of this code and needs to be able to support different joysticks based on name.

The joystick settings window has now been reworked to be a fixed minimum size and dynamically scale with both the number of buttons and axes on a given joystick/controller. Mapping functionality is incomplete at this point still, though the UI exists for it.

The JoystickWidget now has a parent so that it gets cleaned up when the MainWindow is closed preventing zombie-dialog syndrome.

The Joystick Settings window now supports selecting between multiple joysticks for control input and updates its UI accordingly. Much work is left to be done: light/dark styling, settings management, control mappings.

Joystick axes can now be specified as being exclusively-positive in the range [0:1.0] for the throttle. This should really be a vehicle-specific setting.

The UI now updates properly for when a detected joystick is lacking either buttons or axes (as in the case of an in-built accelerometer).

Added an inversion checkbox for each joystick axis so they can be individually inverted or not. This will be a joystick-specific configuration and independent of the autopilot used. Also refactored the code so that the JoystickAxis objects connect directly to the JoystickInput thread for updating the backend. The JoystickWidget is now just a facilitator and doesn't do any redirecting itself.

The button/axis/hat readings are now compared to the previous readings and signals are only emitted if they changed. The joystickChanged signal is still emitted every sample period.

The hat readings from the joystick now works correctly. Also moved some signals over to using an enum from an int type.

Moved the JOYSTICK_*_MAPPING enum into JoystickInput where it belongs. Also renamed some local variables.

Refactored some variables and added some documentation. Also, now the joystickChanged signal emits NaN for axes that aren't mapped, so consumers should handle this properly.

Refactored much of the joystick interface with the largest changes being the removal of dead/unused code including broken event-based SDL reading code. Additionally the mapping code should now work, though it hasn't been tested with controller switching or a real UAS. Finally the existing settings code has been commented-out as it is not compatible with the current state of this code and needs to be able to support different joysticks based on name.

Merge branch 'integration_merge_connstatus' of github.com:Susurrus/qgroundcontrol into integration_merge_connstatus