mavlink_types.h

#ifndef MAVLINK_TYPES_H_
#define MAVLINK_TYPES_H_

#include "inttypes.h"

enum MAV_CLASS
{
    MAV_CLASS_GENERIC = 0,        ///< Generic autopilot, full support for everything
    MAV_CLASS_PIXHAWK = 1,        ///< PIXHAWK autopilot, http://pixhawk.ethz.ch
    MAV_CLASS_SLUGS = 2,          ///< SLUGS autopilot, http://slugsuav.soe.ucsc.edu
    MAV_CLASS_ARDUPILOTMEGA = 3,  ///< ArduPilotMega / ArduCopter, http://diydrones.com
	MAV_CLASS_OPENPILOT = 4,      ///< OpenPilot, http://openpilot.org
	MAV_CLASS_GENERIC_MISSION_WAYPOINTS_ONLY = 5,  ///< Generic autopilot only supporting simple waypoints
	MAV_CLASS_GENERIC_MISSION_NAVIGATION_ONLY = 6, ///< Generic autopilot supporting waypoints and other simple navigation commands
	MAV_CLASS_GENERIC_MISSION_FULL = 7,            ///< Generic autopilot supporting the full mission command set
	MAV_CLASS_NB                  ///< Number of autopilot classes
};

enum MAV_ACTION
{
    MAV_ACTION_HOLD = 0,
    MAV_ACTION_MOTORS_START = 1,
    MAV_ACTION_LAUNCH = 2,
    MAV_ACTION_RETURN = 3,
    MAV_ACTION_EMCY_LAND = 4,
    MAV_ACTION_EMCY_KILL = 5,
    MAV_ACTION_CONFIRM_KILL = 6,
    MAV_ACTION_CONTINUE = 7,
    MAV_ACTION_MOTORS_STOP = 8,
    MAV_ACTION_HALT = 9,
    MAV_ACTION_SHUTDOWN = 10,
    MAV_ACTION_REBOOT = 11,
    MAV_ACTION_SET_MANUAL = 12,
    MAV_ACTION_SET_AUTO = 13,
    MAV_ACTION_STORAGE_READ = 14,
    MAV_ACTION_STORAGE_WRITE = 15,
    MAV_ACTION_CALIBRATE_RC = 16,
    MAV_ACTION_CALIBRATE_GYRO = 17,
    MAV_ACTION_CALIBRATE_MAG = 18,
    MAV_ACTION_CALIBRATE_ACC = 19,
    MAV_ACTION_CALIBRATE_PRESSURE = 20,
    MAV_ACTION_REC_START = 21,
    MAV_ACTION_REC_PAUSE = 22,
    MAV_ACTION_REC_STOP = 23,
    MAV_ACTION_TAKEOFF = 24,
    MAV_ACTION_NAVIGATE = 25,
    MAV_ACTION_LAND = 26,
    MAV_ACTION_LOITER = 27,
    MAV_ACTION_SET_ORIGIN = 28,
    MAV_ACTION_RELAY_ON = 29,
    MAV_ACTION_RELAY_OFF = 30,
    MAV_ACTION_GET_IMAGE = 31,
    MAV_ACTION_VIDEO_START = 32,
    MAV_ACTION_VIDEO_STOP = 33,
    MAV_ACTION_RESET_MAP = 34,
    MAV_ACTION_RESET_PLAN = 35,
    MAV_ACTION_DELAY_BEFORE_COMMAND = 36,
    MAV_ACTION_ASCEND_AT_RATE = 37,
    MAV_ACTION_CHANGE_MODE = 38,
    MAV_ACTION_LOITER_MAX_TURNS = 39,
    MAV_ACTION_LOITER_MAX_TIME = 40,
		MAV_ACTION_START_HILSIM = 41,
		MAV_ACTION_STOP_HILSIM = 42,    
    MAV_ACTION_NB        ///< Number of MAV actions
};

enum MAV_MODE
{
    MAV_MODE_UNINIT = 0,     ///< System is in undefined state
    MAV_MODE_LOCKED = 1,     ///< Motors are blocked, system is safe
    MAV_MODE_MANUAL = 2,     ///< System is allowed to be active, under manual (RC) control
    MAV_MODE_GUIDED = 3,     ///< System is allowed to be active, under autonomous control, manual setpoint
    MAV_MODE_AUTO =   4,     ///< System is allowed to be active, under autonomous control and navigation
    MAV_MODE_TEST1 =  5,     ///< Generic test mode, for custom use
    MAV_MODE_TEST2 =  6,     ///< Generic test mode, for custom use
    MAV_MODE_TEST3 =  7,     ///< Generic test mode, for custom use
    MAV_MODE_READY =  8,     ///< System is ready, motors are unblocked, but controllers are inactive
    MAV_MODE_RC_TRAINING = 9 ///< System is blocked, only RC valued are read and reported back
};

enum MAV_STATE
{
    MAV_STATE_UNINIT = 0,
    MAV_STATE_BOOT,
    MAV_STATE_CALIBRATING,
    MAV_STATE_STANDBY,
    MAV_STATE_ACTIVE,
    MAV_STATE_CRITICAL,
    MAV_STATE_EMERGENCY,
    MAV_STATE_HILSIM,
    MAV_STATE_POWEROFF
};

enum MAV_NAV
{
    MAV_NAV_GROUNDED = 0,
    MAV_NAV_LIFTOFF,
    MAV_NAV_HOLD,
    MAV_NAV_WAYPOINT,
    MAV_NAV_VECTOR,
    MAV_NAV_RETURNING,
    MAV_NAV_LANDING,
    MAV_NAV_LOST,
    MAV_NAV_LOITER
};

enum MAV_TYPE
{
    MAV_GENERIC = 0,
    MAV_FIXED_WING = 1,
    MAV_QUADROTOR = 2,
    MAV_COAXIAL = 3,
    MAV_HELICOPTER = 4,
    MAV_GROUND = 5,
    OCU = 6
};

enum MAV_AUTOPILOT_TYPE
{
    MAV_AUTOPILOT_GENERIC = 0,
    MAV_AUTOPILOT_PIXHAWK = 1,
    MAV_AUTOPILOT_SLUGS = 2,
    MAV_AUTOPILOT_ARDUPILOTMEGA = 3
};

enum MAV_COMPONENT
{
    MAV_COMP_ID_GPS,
    MAV_COMP_ID_WAYPOINTPLANNER,
    MAV_COMP_ID_BLOBTRACKER,
    MAV_COMP_ID_PATHPLANNER,
    MAV_COMP_ID_AIRSLAM,
    MAV_COMP_ID_MAPPER,
    MAV_COMP_ID_CAMERA,
    MAV_COMP_ID_IMU = 200,
    MAV_COMP_ID_UDP_BRIDGE = 240,
    MAV_COMP_ID_UART_BRIDGE = 241,
    MAV_COMP_ID_SYSTEM_CONTROL = 250
};

enum MAV_FRAME
{
    MAV_FRAME_GLOBAL = 0,
    MAV_FRAME_LOCAL = 1,
    MAV_FRAME_MISSION = 2,
	MAV_FRAME_GLOBAL_RELATIVE_ALT = 3
};

#define MAVLINK_STX 0x55 ///< Packet start sign
#define MAVLINK_STX_LEN 1 ///< Length of start sign
#define MAVLINK_MAX_PAYLOAD_LEN 255 ///< Maximum payload length

#define MAVLINK_CORE_HEADER_LEN 5 ///< Length of core header (of the comm. layer): message length (1 byte) + message sequence (1 byte) + message system id (1 byte) + message component id (1 byte) + message type id (1 byte)
#define MAVLINK_NUM_HEADER_BYTES (MAVLINK_CORE_HEADER_LEN + MAVLINK_STX_LEN) ///< Length of all header bytes, including core and checksum
#define MAVLINK_NUM_CHECKSUM_BYTES 2
#define MAVLINK_NUM_NON_PAYLOAD_BYTES (MAVLINK_NUM_HEADER_BYTES + MAVLINK_NUM_CHECKSUM_BYTES)
#define MAVLINK_NUM_NON_STX_PAYLOAD_BYTES (MAVLINK_NUM_NON_PAYLOAD_BYTES - MAVLINK_STX_LEN)

#define MAVLINK_MAX_PACKET_LEN (MAVLINK_MAX_PAYLOAD_LEN + MAVLINK_NUM_NON_PAYLOAD_BYTES) ///< Maximum packet length
//#define MAVLINK_MAX_DATA_LEN MAVLINK_MAX_PACKET_LEN - MAVLINK_STX_LEN

typedef struct __mavlink_system {
    uint8_t sysid;   ///< Used by the MAVLink message_xx_send() convenience function
    uint8_t compid;  ///< Used by the MAVLink message_xx_send() convenience function
    uint8_t type;    ///< Unused, can be used by user to store the system's type
    uint8_t state;   ///< Unused, can be used by user to store the system's state
    uint8_t mode;    ///< Unused, can be used by user to store the system's mode
} mavlink_system_t;

typedef struct __mavlink_message {
    uint8_t len;     ///< Length of payload
    uint8_t seq;     ///< Sequence of packet
    uint8_t sysid;   ///< ID of message sender system/aircraft
    uint8_t compid;  ///< ID of the message sender component
    uint8_t msgid;   ///< ID of message in payload
    uint8_t payload[MAVLINK_MAX_PAYLOAD_LEN]; ///< Payload data, ALIGNMENT IMPORTANT ON MCU
    uint8_t ck_a;    ///< Checksum high byte
    uint8_t ck_b;    ///< Checksum low byte
} mavlink_message_t;

typedef enum {
    MAVLINK_COMM_0,
    MAVLINK_COMM_1,
    MAVLINK_COMM_2,
    MAVLINK_COMM_3
} mavlink_channel_t;

/*
 * applications can set MAVLINK_COMM_NUM_BUFFERS to the maximum number
 * of buffers they will use. If more are used, then the result will be
 * a stack overrun
 */
#ifndef MAVLINK_COMM_NUM_BUFFERS
#if (defined linux) | (defined __linux) | (defined  __MACH__) | (defined _WIN32)
# define MAVLINK_COMM_NUM_BUFFERS 16
#else
# define MAVLINK_COMM_NUM_BUFFERS 4
#endif
#endif

typedef enum {
    MAVLINK_PARSE_STATE_UNINIT=0,
    MAVLINK_PARSE_STATE_IDLE,
    MAVLINK_PARSE_STATE_GOT_STX,
    MAVLINK_PARSE_STATE_GOT_SEQ,
    MAVLINK_PARSE_STATE_GOT_LENGTH,
    MAVLINK_PARSE_STATE_GOT_SYSID,
    MAVLINK_PARSE_STATE_GOT_COMPID,
    MAVLINK_PARSE_STATE_GOT_MSGID,
    MAVLINK_PARSE_STATE_GOT_PAYLOAD,
    MAVLINK_PARSE_STATE_GOT_CRC1
} mavlink_parse_state_t; ///< The state machine for the comm parser

typedef struct __mavlink_status {
    uint8_t ck_a;                       ///< Checksum byte 1
    uint8_t ck_b;                       ///< Checksum byte 2
    uint8_t msg_received;               ///< Number of received messages
    uint8_t buffer_overrun;             ///< Number of buffer overruns
    uint8_t parse_error;                ///< Number of parse errors
    mavlink_parse_state_t parse_state;  ///< Parsing state machine
    uint8_t packet_idx;                 ///< Index in current packet
    uint8_t current_rx_seq;             ///< Sequence number of last packet received
    uint8_t current_tx_seq;             ///< Sequence number of last packet sent
    uint16_t packet_rx_success_count;   ///< Received packets
    uint16_t packet_rx_drop_count;      ///< Number of packet drops
} mavlink_status_t;

#endif /* MAVLINK_TYPES_H_ */