PX4RCCalibration.cc 45 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/*=====================================================================
 
 QGroundControl Open Source Ground Control Station
 
 (c) 2009, 2014 QGROUNDCONTROL PROJECT <http://www.qgroundcontrol.org>
 
 This file is part of the QGROUNDCONTROL project
 
 QGROUNDCONTROL is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.
 
 QGROUNDCONTROL is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with QGROUNDCONTROL. If not, see <http://www.gnu.org/licenses/>.
 
 ======================================================================*/

/// @file
///     @brief PX4 RC Calibration Widget
///     @author Don Gagne <don@thegagnes.com

28
#include <QSettings>
29 30 31

#include "PX4RCCalibration.h"
#include "UASManager.h"
Don Gagne's avatar
Don Gagne committed
32
#include "QGCMessageBox.h"
33

Don Gagne's avatar
Don Gagne committed
34
const int PX4RCCalibration::_updateInterval = 150;              ///< Interval for timer which updates radio channel widgets
35
const int PX4RCCalibration::_rcCalPWMCenterPoint = ((PX4RCCalibration::_rcCalPWMValidMaxValue - PX4RCCalibration::_rcCalPWMValidMinValue) / 2.0f) + PX4RCCalibration::_rcCalPWMValidMinValue;
Don Gagne's avatar
Don Gagne committed
36
// FIXME: Double check these mins againt 150% throws
Don Gagne's avatar
Don Gagne committed
37 38 39 40
const int PX4RCCalibration::_rcCalPWMValidMinValue = 1300;      ///< Largest valid minimum PWM Min range value
const int PX4RCCalibration::_rcCalPWMValidMaxValue = 1700;      ///< Smallest valid maximum PWM Max range value
const int PX4RCCalibration::_rcCalPWMDefaultMinValue = 1000;    ///< Default value for Min if not set
const int PX4RCCalibration::_rcCalPWMDefaultMaxValue = 2000;    ///< Default value for Max if not set
Don Gagne's avatar
Don Gagne committed
41 42 43 44 45 46 47 48
const int PX4RCCalibration::_rcCalRoughCenterDelta = 50;        ///< Delta around center point which is considered to be roughly centered
const int PX4RCCalibration::_rcCalMoveDelta = 300;            ///< Amount of delta past center which is considered stick movement
const int PX4RCCalibration::_rcCalSettleDelta = 20;           ///< Amount of delta which is considered no stick movement
const int PX4RCCalibration::_rcCalMinDelta = 100;             ///< Amount of delta allowed around min value to consider channel at min

const int PX4RCCalibration::_stickDetectSettleMSecs = 500;

const char*  PX4RCCalibration::_imageFilePrefix = ":files/images/px4/calibration/";
49 50 51
const char*  PX4RCCalibration::_imageFileMode1Dir = "mode1/";
const char*  PX4RCCalibration::_imageFileMode2Dir = "mode2/";
const char*  PX4RCCalibration::_imageCenter = "radioCenter.png";
Don Gagne's avatar
Don Gagne committed
52 53 54 55 56 57 58 59 60 61
const char*  PX4RCCalibration::_imageHome = "radioHome.png";
const char*  PX4RCCalibration::_imageThrottleUp = "radioThrottleUp.png";
const char*  PX4RCCalibration::_imageThrottleDown = "radioThrottleDown.png";
const char*  PX4RCCalibration::_imageYawLeft = "radioYawLeft.png";
const char*  PX4RCCalibration::_imageYawRight = "radioYawRight";
const char*  PX4RCCalibration::_imageRollLeft = "radioRollLeft.png";
const char*  PX4RCCalibration::_imageRollRight = "radioRollRight.png";
const char*  PX4RCCalibration::_imagePitchUp = "radioPitchUp";
const char*  PX4RCCalibration::_imagePitchDown = "radioPitchDown";
const char*  PX4RCCalibration::_imageSwitchMinMax = "radioSwitchMinMax";
62

63 64 65
const char* PX4RCCalibration::_settingsGroup = "RadioCalibration";
const char* PX4RCCalibration::_settingsKeyTransmitterMode = "TransmitterMode";

66
const struct PX4RCCalibration::FunctionInfo PX4RCCalibration::_rgFunctionInfo[PX4RCCalibration::rcCalFunctionMax] = {
Don Gagne's avatar
Don Gagne committed
67 68 69 70 71 72 73 74 75 76 77 78
    //Parameter          required
    { "RC_MAP_ROLL" },
    { "RC_MAP_PITCH" },
    { "RC_MAP_YAW" },
    { "RC_MAP_THROTTLE" },
    { "RC_MAP_MODE_SW" },
    { "RC_MAP_POSCTL_SW" },
    { "RC_MAP_LOITER_SW" },
    { "RC_MAP_RETURN_SW" },
    { "RC_MAP_FLAPS" },
    { "RC_MAP_AUX1" },
    { "RC_MAP_AUX2" },
79 80 81 82
};

PX4RCCalibration::PX4RCCalibration(QWidget *parent) :
    QWidget(parent),
Don Gagne's avatar
Don Gagne committed
83
    _currentStep(-1),
84
    _transmitterMode(2),
85 86 87
    _chanCount(0),
    _rcCalState(rcCalStateChannelWait),
    _mav(NULL),
Don Gagne's avatar
Don Gagne committed
88
    _paramMgr(NULL),
Don Gagne's avatar
Don Gagne committed
89 90
    _ui(new Ui::PX4RCCalibration),
    _unitTestMode(false)
91 92 93
{
    _ui->setupUi(this);
    
Don Gagne's avatar
Don Gagne committed
94
    // Initialize arrays of monitor control pointers. This allows for more efficient code writing using "for" loops.
95
    for (int chan=0; chan<_chanMax; chan++) {
Don Gagne's avatar
Don Gagne committed
96
        QString radioWidgetName;
97
        
Don Gagne's avatar
Don Gagne committed
98 99 100 101 102
        radioWidgetName = "channel%1Value";
        RCValueWidget* monitorWidget = findChild<RCValueWidget*>(radioWidgetName.arg(chan+1));
        Q_ASSERT(monitorWidget);
        _rgRCValueMonitorWidget[chan] = monitorWidget;
        monitorWidget->setSmallMode();    // Monitor display uses small display
103
        
Don Gagne's avatar
Don Gagne committed
104 105 106 107
        radioWidgetName = "channel%1Label";
        QLabel* monitorLabel = findChild<QLabel*>(radioWidgetName.arg(chan+1));
        Q_ASSERT(monitorLabel);
        _rgRCValueMonitorLabel[chan] = monitorLabel;
108
    }
Don Gagne's avatar
Don Gagne committed
109 110 111 112 113 114 115 116 117 118 119 120

    // Initialize array of attitude controls. Order here doesn't matter.
    _rgAttitudeControl[0].function = rcCalFunctionThrottle;
    _rgAttitudeControl[0].valueWidget = _ui->throttleValue;
    _rgAttitudeControl[1].function = rcCalFunctionYaw;
    _rgAttitudeControl[1].valueWidget = _ui->yawValue;
    _rgAttitudeControl[2].function = rcCalFunctionRoll;
    _rgAttitudeControl[2].valueWidget = _ui->rollValue;
    _rgAttitudeControl[3].function = rcCalFunctionPitch;
    _rgAttitudeControl[3].valueWidget = _ui->pitchValue;
    _rgAttitudeControl[4].function = rcCalFunctionFlaps;
    _rgAttitudeControl[4].valueWidget = _ui->flapsValue;
121
    
122 123 124 125 126
    // This code assume we already have an active UAS with ready parameters
    _mav = UASManager::instance()->getActiveUAS();
    Q_ASSERT(_mav);
    
    // Connect new signals
127 128 129
    
    bool fSucceeded;
    Q_UNUSED(fSucceeded);
130
    fSucceeded =  connect(_mav, SIGNAL(remoteControlChannelRawChanged(int,float)), this, SLOT(_remoteControlChannelRawChanged(int,float)));
131
    Q_ASSERT(fSucceeded);
132 133 134 135 136
    
    _paramMgr = _mav->getParamManager();
    Q_ASSERT(_paramMgr);
    Q_ASSERT(_paramMgr->parametersReady());
    
Don Gagne's avatar
Don Gagne committed
137
    connect(_ui->spektrumBind, &QPushButton::clicked, this, &PX4RCCalibration::_spektrumBind);
138 139 140 141
    
    _updateTimer.setInterval(150);
    _updateTimer.start();

Don Gagne's avatar
Don Gagne committed
142 143 144 145 146 147 148 149 150
    connect(_ui->rcCalCancel, &QPushButton::clicked, this, &PX4RCCalibration::_stopCalibration);
    connect(_ui->rcCalSkip, &QPushButton::clicked, this, &PX4RCCalibration::_skipButton);
    connect(_ui->rcCalNext, &QPushButton::clicked, this, &PX4RCCalibration::_nextButton);
    
    connect(_ui->rollTrim, &QPushButton::clicked, this, &PX4RCCalibration::_trimNYI);
    connect(_ui->yawTrim, &QPushButton::clicked, this, &PX4RCCalibration::_trimNYI);
    connect(_ui->pitchTrim, &QPushButton::clicked, this, &PX4RCCalibration::_trimNYI);
    connect(_ui->throttleTrim, &QPushButton::clicked, this, &PX4RCCalibration::_trimNYI);
    
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
    _loadSettings();

    if (_transmitterMode == 1) {
        _ui->mode1->setChecked(true);
        _mode1Toggled(true);
    } else if (_transmitterMode == 2) {
        _ui->mode2->setChecked(true);
        _mode2Toggled(true);
    } else {
        Q_ASSERT(false);
    }
    
    connect(_ui->mode1, &QAbstractButton::toggled, this, &PX4RCCalibration::_mode1Toggled);
    connect(_ui->mode2, &QAbstractButton::toggled, this, &PX4RCCalibration::_mode2Toggled);
    
Don Gagne's avatar
Don Gagne committed
166
    _stopCalibration();
167 168 169
    
    connect(&_updateTimer, &QTimer::timeout, this, &PX4RCCalibration::_updateView);
    _setInternalCalibrationValuesFromParameters();
Don Gagne's avatar
Don Gagne committed
170
}
171

Don Gagne's avatar
Don Gagne committed
172 173
PX4RCCalibration::~PX4RCCalibration()
{
174
    _storeSettings();
Don Gagne's avatar
Don Gagne committed
175
}
176

Don Gagne's avatar
Don Gagne committed
177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227
/// @brief Returns the state machine entry for the specified state.
const PX4RCCalibration::stateMachineEntry* PX4RCCalibration::_getStateMachineEntry(int step)
{
    static const char* msgBegin = "Lower the Throttle stick all the way down as shown in diagram.\nReset all transmitter trims to center.\n\n"
                                 "It is recommended to disconnect all motors for additional safety, however, the system is designed to not arm during the calibration.\n\n"
                                 "Click Next to continue";
    static const char* msgThrottleUp = "Move the Throttle stick all the way up and hold it there...";
    static const char* msgThrottleDown = "Move the Throttle stick all the way down and leave it there...";
    static const char* msgYawLeft = "Move the Yaw stick all the way to the left and hold it there...";
    static const char* msgYawRight = "Move the Yaw stick all the way to the right and hold it there...";
    static const char* msgRollLeft = "Move the Roll stick all the way to the left and hold it there...";
    static const char* msgRollRight = "Move the Roll stick all the way to the right and hold it there...";
    static const char* msgPitchDown = "Move the Pitch stick all the way down and hold it there...";
    static const char* msgPitchUp = "Move the Pitch stick all the way up and hold it there...";
    static const char* msgPitchCenter = "Allow the Pitch stick to move back to center...";
    static const char* msgAux1Switch = "Move the switch or dial you want to use for Aux1.\n\n"
                                            "You can click Skip if you don't want to assign.";
    static const char* msgAux2Switch = "Move the switch or dial you want to use for Aux2.\n\n"
                                            "You can click Skip if you don't want to assign.";
    static const char* msgSwitchMinMax = "Move all the transmitter switches and/or dials back and forth to their extreme positions.";
    static const char* msgFlapsDetect = "Move the switch or dial you want to use for Flaps back and forth a few times. "
                                            "Then leave the switch/dial at the position you want to use for Flaps fully extended.\n\n"
                                            "Click Next to continue.\n"
                                            "If you won't be using Flaps, click Skip.";
    static const char* msgFlapsUp = "Move the switch or dial you want to use for Flaps to the position you want to use for Flaps fully retracted.";
    static const char* msgComplete = "All settings have been captured. Click Next to write the new parameters to your board.";
    
    static const stateMachineEntry rgStateMachine[] = {
        //Function
        { rcCalFunctionMax,                 msgBegin,           _imageHome,         &PX4RCCalibration::_inputCenterWaitBegin,   &PX4RCCalibration::_saveAllTrims,       NULL },
        { rcCalFunctionThrottle,            msgThrottleUp,      _imageThrottleUp,   &PX4RCCalibration::_inputStickDetect,       NULL,                                   NULL },
        { rcCalFunctionThrottle,            msgThrottleDown,    _imageThrottleDown, &PX4RCCalibration::_inputStickMin,          NULL,                                   NULL },
        { rcCalFunctionYaw,                 msgYawRight,        _imageYawRight,     &PX4RCCalibration::_inputStickDetect,       NULL,                                   NULL },
        { rcCalFunctionYaw,                 msgYawLeft,         _imageYawLeft,      &PX4RCCalibration::_inputStickMin,          NULL,                                   NULL },
        { rcCalFunctionRoll,                msgRollRight,       _imageRollRight,    &PX4RCCalibration::_inputStickDetect,       NULL,                                   NULL },
        { rcCalFunctionRoll,                msgRollLeft,        _imageRollLeft,     &PX4RCCalibration::_inputStickMin,          NULL,                                   NULL },
        { rcCalFunctionPitch,               msgPitchUp,         _imagePitchUp,      &PX4RCCalibration::_inputStickDetect,       NULL,                                   NULL },
        { rcCalFunctionPitch,               msgPitchDown,       _imagePitchDown,    &PX4RCCalibration::_inputStickMin,          NULL,                                   NULL },
        { rcCalFunctionPitch,               msgPitchCenter,     _imageHome,         &PX4RCCalibration::_inputCenterWait,        NULL,                                   NULL },
        { rcCalFunctionMax,                 msgSwitchMinMax,    _imageSwitchMinMax, &PX4RCCalibration::_inputSwitchMinMax,      &PX4RCCalibration::_nextStep,           NULL },
        { rcCalFunctionFlaps,               msgFlapsDetect,     _imageThrottleDown, &PX4RCCalibration::_inputFlapsDetect,       &PX4RCCalibration::_saveFlapsDown,      &PX4RCCalibration::_skipFlaps },
        { rcCalFunctionFlaps,               msgFlapsUp,         _imageThrottleDown, &PX4RCCalibration::_inputFlapsUp,           NULL,                                   NULL },
        { rcCalFunctionAux1,                msgAux1Switch,      _imageThrottleDown, &PX4RCCalibration::_inputSwitchDetect,      NULL,                                   &PX4RCCalibration::_nextStep },
        { rcCalFunctionAux2,                msgAux2Switch,      _imageThrottleDown, &PX4RCCalibration::_inputSwitchDetect,      NULL,                                   &PX4RCCalibration::_nextStep },
        { rcCalFunctionMax,                 msgComplete,        _imageThrottleDown, NULL,                                       &PX4RCCalibration::_writeCalibration,   NULL },
    };
    
    Q_ASSERT(step >=0 && step < (int)(sizeof(rgStateMachine) / sizeof(rgStateMachine[0])));
    
    return &rgStateMachine[step];
}
228

Don Gagne's avatar
Don Gagne committed
229 230 231 232 233 234 235 236 237 238 239 240 241
void PX4RCCalibration::_nextStep(void)
{
    _currentStep++;
    _setupCurrentState();
}


/// @brief Sets up the state machine according to the current step from _currentStep.
void PX4RCCalibration::_setupCurrentState(void)
{
   const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
    
    _ui->rcCalStatus->setText(state->instructions);
242 243
    
    _setHelpImage(state->image);
Don Gagne's avatar
Don Gagne committed
244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296
    
    _stickDetectChannel = _chanMax;
    _stickDetectSettleStarted = false;
    
    _rcCalSaveCurrentValues();
    
    _ui->rcCalNext->setEnabled(state->nextFn != NULL);
    _ui->rcCalSkip->setEnabled(state->skipFn != NULL);
}

/// @brief This routine is called whenever a raw value for an RC channel changes. It will call the input
/// function as specified by the state machine.
///     @param chan RC channel on which signal is coming from (0-based)
///     @param fval Current value for channel
void PX4RCCalibration::_remoteControlChannelRawChanged(int chan, float fval)
{
    Q_ASSERT(chan >= 0 && chan <= _chanMax);
    
    // We always update raw values
    _rcRawValue[chan] = fval;
    
    //qDebug() << "Raw value" << chan << fval;
    
    if (_currentStep == -1) {
        // Track the receiver channel count by keeping track of how many channels we see
        if (chan + 1 > (int)_chanCount) {
            _chanCount = chan + 1;
            _ui->receiverInfo->setText(tr("%1 channel receiver").arg(_chanCount));
            if (_chanCount < _chanMinimum) {
                _ui->rcCalStatus->setText(tr("Detected %1 radio channels. To operate PX4, you need at least %2 channels.").arg(_chanCount).arg(_chanMinimum));
            } else {
                _ui->rcCalStatus->clear();
            }
        }
    }
    
    if (_currentStep != -1) {
        const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
        Q_ASSERT(state);
        if (state->rcInputFn) {
            (this->*state->rcInputFn)(state->function, chan, fval);
        }
    }
}

void PX4RCCalibration::_nextButton(void)
{
    if (_currentStep == -1) {
        // Need to have enough channels
        if (_chanCount < _chanMinimum) {
            if (_unitTestMode) {
                emit nextButtonMessageBoxDisplayed();
            } else {
Don Gagne's avatar
Don Gagne committed
297
                QGCMessageBox::warning(tr("Receiver"), tr("Detected %1 radio channels. To operate PX4, you need at least %2 channels.").arg(_chanCount).arg(_chanMinimum));
Don Gagne's avatar
Don Gagne committed
298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321
            }
            return;
        }
        _startCalibration();
    } else {
        const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
        Q_ASSERT(state);
        Q_ASSERT(state->nextFn);
        (this->*state->nextFn)();
    }
}

void PX4RCCalibration::_skipButton(void)
{
    Q_ASSERT(_currentStep != -1);
    
    const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
    Q_ASSERT(state);
    Q_ASSERT(state->skipFn);
    (this->*state->skipFn)();
}

void PX4RCCalibration::_trimNYI(void)
{
Don Gagne's avatar
Don Gagne committed
322
    QGCMessageBox::warning(tr("Set Trim"), tr("Setting individual trims is not yet implemented. You will need to go through full calibration to set trims."));
Don Gagne's avatar
Don Gagne committed
323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392
}

void PX4RCCalibration::_saveAllTrims(void)
{
    // We save all trims as the first step. At this point no channels are mapped but it should still
    // allow us to get good trims for the roll/pitch/yaw/throttle even though we don't know which
    // channels they are yet. AS we continue through the process the other channels will get their
    // trims reset to correct values.
    
    for (int i=0; i<_chanCount; i++) {
        //qDebug() << "_saveAllTrims trim" << _rcRawValue[i];
        _rgChannelInfo[i].rcTrim = _rcRawValue[i];
    }
    _nextStep();
}

/// @brief Waits for the sticks to be centered, enabling Next when done.
void PX4RCCalibration::_inputCenterWaitBegin(enum rcCalFunctions function, int chan, int value)
{
    Q_UNUSED(function);
    Q_UNUSED(chan);
    Q_UNUSED(value);
    
    // FIXME: Doesn't wait for center
    
    _ui->rcCalNext->setEnabled(true);
}

bool PX4RCCalibration::_stickSettleComplete(int value)
{
    // We are waiting for the stick to settle out to a max position
    
    if (abs(_stickDetectValue - value) > _rcCalSettleDelta) {
        // Stick is moving too much to consider stopped
        
        //qDebug() << "_stickSettleComplete still moving, _stickDetectValue:value" << _stickDetectValue << value;

        _stickDetectValue = value;
        _stickDetectSettleStarted = false;
    } else {
        // Stick is still positioned within the specified small range
        
        if (_stickDetectSettleStarted) {
            // We have already started waiting
            
            if (_stickDetectSettleElapsed.elapsed() > _stickDetectSettleMSecs) {
                // Stick has stayed positioned in one place long enough, detection is complete.
                return true;
            }
        } else {
            // Start waiting for the stick to stay settled for _stickDetectSettleWaitMSecs msecs
            
            //qDebug() << "_stickSettleComplete starting settle timer, _stickDetectValue:value" << _stickDetectValue << value;
            
            _stickDetectSettleStarted = true;
            _stickDetectSettleElapsed.start();
        }
    }
    
    return false;
}

void PX4RCCalibration::_inputStickDetect(enum rcCalFunctions function, int channel, int value)
{
    //qDebug() << "_inputStickDetect function:channel:value" << function << channel << value;
    
    // If this channel is already used in a mapping we can't use it again
    if (_rgChannelInfo[channel].function != rcCalFunctionMax) {
        return;
    }
393
    
Don Gagne's avatar
Don Gagne committed
394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558
    if (_stickDetectChannel == _chanMax) {
        // We have not detected enough movement on a channel yet
        
        if (abs(_rcValueSave[channel] - value) > _rcCalMoveDelta) {
            // Stick has moved far enough to consider it as being selected for the function
            
            //qDebug() << "_inputStickDetect starting settle wait, function:channel:value" << function << channel << value;
            
            // Setup up to detect stick being pegged to min or max value
            _stickDetectChannel = channel;
            _stickDetectInitialValue = value;
            _stickDetectValue = value;
        }
    } else if (channel == _stickDetectChannel) {
        if (_stickSettleComplete(value)) {
            ChannelInfo* info = &_rgChannelInfo[channel];
            
            //qDebug() << "_inputStickDetect settle complete, function:channel:value" << function << channel << value;
            
            // Stick detection is complete. Stick should be at max position.
            // Map the channel to the function
            _rgFunctionChannelMapping[function] = channel;
            info->function = function;
            
            // Channel should be at max value, if it is below initial set point the the channel is reversed.
            info->reversed = value < _rcValueSave[channel];
            
            if (info->reversed) {
                _rgRCValueMonitorWidget[channel]->setMin(value);
                _rgRCValueMonitorWidget[channel]->setMinValid(true);
                _rgChannelInfo[channel].rcMin = value;
            } else {
                _rgRCValueMonitorWidget[channel]->setMax(value);
                _rgRCValueMonitorWidget[channel]->setMaxValid(true);
                _rgChannelInfo[channel].rcMax = value;
            }
            
            _nextStep();
        }
    }
}

void PX4RCCalibration::_inputStickMin(enum rcCalFunctions function, int channel, int value)
{
    // We only care about the channel mapped to the function we are working on
    if (_rgFunctionChannelMapping[function] != channel) {
        return;
    }

    if (_stickDetectChannel == _chanMax) {
        // Setup up to detect stick being pegged to extreme position
        if (_rgChannelInfo[channel].reversed) {
            if (value > _rcCalPWMCenterPoint + _rcCalMoveDelta) {
                _stickDetectChannel = channel;
                _stickDetectInitialValue = value;
                _stickDetectValue = value;
            }
        } else {
            if (value < _rcCalPWMCenterPoint - _rcCalMoveDelta) {
                _stickDetectChannel = channel;
                _stickDetectInitialValue = value;
                _stickDetectValue = value;
            }
        }
    } else {
        // We are waiting for the selected channel to settle out
        
        if (_stickSettleComplete(value)) {
            ChannelInfo* info = &_rgChannelInfo[channel];
            
            // Stick detection is complete. Stick should be at min position.
            if (info->reversed) {
                _rgRCValueMonitorWidget[channel]->setMax(value);
                _rgRCValueMonitorWidget[channel]->setMaxValid(true);
                _rgChannelInfo[channel].rcMax = value;
            } else {
                _rgRCValueMonitorWidget[channel]->setMin(value);
                _rgRCValueMonitorWidget[channel]->setMinValid(true);
                _rgChannelInfo[channel].rcMin = value;
            }
            
            _nextStep();
        }
    }
}

void PX4RCCalibration::_inputCenterWait(enum rcCalFunctions function, int channel, int value)
{
    // We only care about the channel mapped to the function we are working on
    if (_rgFunctionChannelMapping[function] != channel) {
        return;
    }
    
    if (_stickDetectChannel == _chanMax) {
        // Sticks have not yet moved close enough to center
        
        if (abs(_rcCalPWMCenterPoint - value) < _rcCalRoughCenterDelta) {
            // Stick has moved close enough to center that we can start waiting for it to settle
            _stickDetectChannel = channel;
            _stickDetectInitialValue = value;
            _stickDetectValue = value;
        }
    } else {
        if (_stickSettleComplete(value)) {
            _nextStep();
        }
    }
}

/// @brief Saves min/max for non-mapped channels
void PX4RCCalibration::_inputSwitchMinMax(enum rcCalFunctions function, int channel, int value)
{
    Q_UNUSED(function);

    // If the channel is mapped we already have min/max
    if (_rgChannelInfo[channel].function != rcCalFunctionMax) {
        return;
    }
    
    if (abs(_rcCalPWMCenterPoint - value) > _rcCalMoveDelta) {
        // Stick has moved far enough from center to consider for min/max
        if (value < _rcCalPWMCenterPoint) {
            int minValue = qMin(_rgChannelInfo[channel].rcMin, value);
            
            //qDebug() << "_inputSwitchMinMax setting min channel:min" << channel << minValue;
            
            _rgChannelInfo[channel].rcMin = minValue;
            _rgRCValueMonitorWidget[channel]->setMin(minValue);
            _rgRCValueMonitorWidget[channel]->setMinValid(true);
        } else {
            int maxValue = qMax(_rgChannelInfo[channel].rcMax, value);
            
            //qDebug() << "_inputSwitchMinMax setting max channel:max" << channel << maxValue;
            
            _rgChannelInfo[channel].rcMax = maxValue;
            _rgRCValueMonitorWidget[channel]->setMax(maxValue);
            _rgRCValueMonitorWidget[channel]->setMaxValid(true);
        }
    }
}

void PX4RCCalibration::_skipFlaps(void)
{
    // Flaps channel may have been identified. Clear it out.
    for (int i=0; i<_chanCount; i++) {
        if (_rgChannelInfo[i].function == PX4RCCalibration::rcCalFunctionFlaps) {
            _rgChannelInfo[i].function = rcCalFunctionMax;
        }
    }
    _rgFunctionChannelMapping[PX4RCCalibration::rcCalFunctionFlaps] = _chanMax;

    // Skip over flap steps
    _currentStep += 2;
    _setupCurrentState();
}

void PX4RCCalibration::_saveFlapsDown(void)
{
    int channel = _rgFunctionChannelMapping[rcCalFunctionFlaps];
    
    if (channel == _chanMax) {
        // Channel not yet mapped, still waiting for switch to move
        if (_unitTestMode) {
            emit nextButtonMessageBoxDisplayed();
        } else {
Don Gagne's avatar
Don Gagne committed
559
            QGCMessageBox::warning(tr("Flaps switch"), tr("Flaps switch has not yet been detected."));
Don Gagne's avatar
Don Gagne committed
560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588
        }
        return;
    }
    
    Q_ASSERT(channel != -1);
    ChannelInfo* info = &_rgChannelInfo[channel];
    
    int rcValue = _rcRawValue[channel];
    
    // Switch detection is complete. Switch should be at flaps fully extended position.
    
    // Channel should be at max value, if it is below initial set point the channel is reversed.
    info->reversed = rcValue < _rcValueSave[channel];
    
    if (info->reversed) {
        _rgRCValueMonitorWidget[channel]->setMin(rcValue);
        _rgRCValueMonitorWidget[channel]->setMinValid(true);
        _rgChannelInfo[channel].rcMin = rcValue;
    } else {
        _rgRCValueMonitorWidget[channel]->setMax(rcValue);
        _rgRCValueMonitorWidget[channel]->setMaxValid(true);
        _rgChannelInfo[channel].rcMax = rcValue;
    }
    
    _nextStep();
}

void PX4RCCalibration::_inputFlapsUp(enum rcCalFunctions function, int channel, int value)
{
589 590
    Q_UNUSED(function);
    
Don Gagne's avatar
Don Gagne committed
591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669
    // FIXME: Duplication
    
    Q_ASSERT(function == rcCalFunctionFlaps);
    
    // We only care about the channel mapped to flaps
    if (_rgFunctionChannelMapping[rcCalFunctionFlaps] != channel) {
        return;
    }
    
    if (_stickDetectChannel == _chanMax) {
        // Setup up to detect stick being pegged to extreme position
        if (_rgChannelInfo[channel].reversed) {
            if (value > _rcCalPWMCenterPoint + _rcCalMoveDelta) {
                _stickDetectChannel = channel;
                _stickDetectInitialValue = value;
                _stickDetectValue = value;
            }
        } else {
            if (value < _rcCalPWMCenterPoint - _rcCalMoveDelta) {
                _stickDetectChannel = channel;
                _stickDetectInitialValue = value;
                _stickDetectValue = value;
            }
        }
    } else {
        // We are waiting for the selected channel to settle out
        
        if (_stickSettleComplete(value)) {
            ChannelInfo* info = &_rgChannelInfo[channel];
            
            // Stick detection is complete. Stick should be at min position.
            if (info->reversed) {
                _rgRCValueMonitorWidget[channel]->setMax(value);
                _rgRCValueMonitorWidget[channel]->setMaxValid(true);
                _rgChannelInfo[channel].rcMax = value;
            } else {
                _rgRCValueMonitorWidget[channel]->setMin(value);
                _rgRCValueMonitorWidget[channel]->setMinValid(true);
                _rgChannelInfo[channel].rcMin = value;
            }
            
            _nextStep();
        }
    }
}

void PX4RCCalibration::_switchDetect(enum rcCalFunctions function, int channel, int value, bool moveToNextStep)
{
    // If this channel is already used in a mapping we can't use it again
    if (_rgChannelInfo[channel].function != rcCalFunctionMax) {
        return;
    }
    
    if (abs(_rcValueSave[channel] - value) > _rcCalMoveDelta) {
        ChannelInfo* info = &_rgChannelInfo[channel];
        
        // Switch has moved far enough to consider it as being selected for the function
        
        // Map the channel to the function
        _rgChannelInfo[channel].function = function;
        _rgFunctionChannelMapping[function] = channel;
        info->function = function;
        
        //qDebug() << "Function:" << function << "mapped to:" << channel;
        
        if (moveToNextStep) {
            _nextStep();
        }
    }
}

void PX4RCCalibration::_inputSwitchDetect(enum rcCalFunctions function, int channel, int value)
{
    _switchDetect(function, channel, value, true /* move to next step after detection */);
}

void PX4RCCalibration::_inputFlapsDetect(enum rcCalFunctions function, int channel, int value)
{
    _switchDetect(function, channel, value, false /* do not move to next step after detection */);
670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690
}

/// @brief Resets internal calibration values to their initial state in preparation for a new calibration sequence.
void PX4RCCalibration::_resetInternalCalibrationValues(void)
{
    // Set all raw channels to not reversed and center point values
    for (size_t i=0; i<_chanMax; i++) {
        struct ChannelInfo* info = &_rgChannelInfo[i];
        info->function = rcCalFunctionMax;
        info->reversed = false;
        info->rcMin = PX4RCCalibration::_rcCalPWMCenterPoint;
        info->rcMax = PX4RCCalibration::_rcCalPWMCenterPoint;
        info->rcTrim = PX4RCCalibration::_rcCalPWMCenterPoint;
    }
    
    // Initialize function mapping to function channel not set
    for (size_t i=0; i<rcCalFunctionMax; i++) {
        _rgFunctionChannelMapping[i] = _chanMax;
    }
    
    _showMinMaxOnRadioWidgets(false);
Don Gagne's avatar
Don Gagne committed
691
    _showTrimOnRadioWidgets(false);
692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708
    
    // Reserve the existing Flight Mode switch settings channels so we don't re-use them
    
    static const rcCalFunctions rgFlightModeFunctions[] = {
        rcCalFunctionModeSwitch,
        rcCalFunctionPosCtlSwitch,
        rcCalFunctionLoiterSwitch,
        rcCalFunctionReturnSwitch };
    static const size_t crgFlightModeFunctions = sizeof(rgFlightModeFunctions) / sizeof(rgFlightModeFunctions[0]);

    int componentId = _paramMgr->getDefaultComponentId();
    for (size_t i=0; i < crgFlightModeFunctions; i++) {
        QVariant value;
        enum rcCalFunctions curFunction = rgFlightModeFunctions[i];
        
        bool paramFound = _paramMgr->getParameterValue(componentId, _rgFunctionInfo[curFunction].parameterName, value);
        Q_ASSERT(paramFound);
Don Gagne's avatar
Don Gagne committed
709
        Q_UNUSED(paramFound);
710 711 712 713 714 715 716 717 718 719 720 721 722 723
        
        bool ok;
        int channel = value.toInt(&ok);
        Q_ASSERT(ok);
        Q_UNUSED(ok);
        
        // Parameter: 1-based channel, 0=not mapped
        // _rgFunctionChannelMapping: 0-based channel, _chanMax=not mapped
        
        _rgFunctionChannelMapping[curFunction] = (channel == 0) ? _chanMax : channel;
        if (channel != 0) {
            _rgChannelInfo[channel - 1].function = curFunction;
        }
    }
Don Gagne's avatar
Don Gagne committed
724 725
}

Don Gagne's avatar
Don Gagne committed
726
/// @brief Sets internal calibration values from the stored parameters
Don Gagne's avatar
Don Gagne committed
727 728 729 730
void PX4RCCalibration::_setInternalCalibrationValuesFromParameters(void)
{
    Q_ASSERT(_paramMgr);
    
731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756
    // Initialize all function mappings to not set
    
    for (size_t i=0; i<_chanMax; i++) {
        struct ChannelInfo* info = &_rgChannelInfo[i];
        info->function = rcCalFunctionMax;
    }
    
    for (size_t i=0; i<rcCalFunctionMax; i++) {
        _rgFunctionChannelMapping[i] = _chanMax;
    }
    
    // FIXME: Hardwired component id
    
    // Pull parameters and update
    
    QString minTpl("RC%1_MIN");
    QString maxTpl("RC%1_MAX");
    QString trimTpl("RC%1_TRIM");
    QString revTpl("RC%1_REV");
    QVariant value;
    bool paramFound;
    bool convertOk;
    int componentId = _paramMgr->getDefaultComponentId();
    
    for (int i = 0; i < _chanMax; ++i) {
        struct ChannelInfo* info = &_rgChannelInfo[i];
Don Gagne's avatar
Don Gagne committed
757
        
758 759 760 761 762
        paramFound = _paramMgr->getParameterValue(componentId, trimTpl.arg(i+1), value);
        Q_ASSERT(paramFound);
        if (paramFound) {
            info->rcTrim = value.toInt(&convertOk);
            Q_ASSERT(convertOk);
Don Gagne's avatar
Don Gagne committed
763 764
        }
        
765 766 767 768 769
        paramFound = _paramMgr->getParameterValue(componentId, minTpl.arg(i+1), value);
        Q_ASSERT(paramFound);
        if (paramFound) {
            info->rcMin = value.toInt(&convertOk);
            Q_ASSERT(convertOk);
Don Gagne's avatar
Don Gagne committed
770 771
        }

772 773 774 775 776 777
        paramFound = _paramMgr->getParameterValue(componentId, maxTpl.arg(i+1), value);
        Q_ASSERT(paramFound);
        if (paramFound) {
            info->rcMax = value.toInt(&convertOk);
            Q_ASSERT(convertOk);
        }
Don Gagne's avatar
Don Gagne committed
778

779 780 781 782 783 784 785
        paramFound = _paramMgr->getParameterValue(componentId, revTpl.arg(i+1), value);
        Q_ASSERT(paramFound);
        if (paramFound) {
            float floatReversed = value.toFloat(&convertOk);
            Q_ASSERT(convertOk);
            Q_ASSERT(floatReversed == 1.0f || floatReversed == -1.0f);
            info->reversed = floatReversed == -1.0f;
Don Gagne's avatar
Don Gagne committed
786
        }
787 788 789 790
    }
    
    for (int i=0; i<rcCalFunctionMax; i++) {
        int32_t paramChannel;
Don Gagne's avatar
Don Gagne committed
791
        
792 793 794 795 796
        paramFound = _paramMgr->getParameterValue(componentId, _rgFunctionInfo[i].parameterName, value);
        Q_ASSERT(paramFound);
        if (paramFound) {
            paramChannel = value.toInt(&convertOk);
            Q_ASSERT(convertOk);
Don Gagne's avatar
Don Gagne committed
797
            
798 799 800
            if (paramChannel != 0) {
                _rgFunctionChannelMapping[i] = paramChannel - 1;
                _rgChannelInfo[paramChannel - 1].function = (enum rcCalFunctions)i;
Don Gagne's avatar
Don Gagne committed
801 802 803
            }
        }
    }
804 805 806
    
    _showMinMaxOnRadioWidgets(true);
    _showTrimOnRadioWidgets(true);
807 808 809
}

/// @brief Sets a connected Spektrum receiver into bind mode
Don Gagne's avatar
Don Gagne committed
810 811 812 813
void PX4RCCalibration::_spektrumBind(void)
{

    Q_ASSERT(_mav);
814
    
Don Gagne's avatar
Don Gagne committed
815 816 817 818 819 820 821 822 823 824 825
    QMessageBox bindTypeMsg(this);
    
    bindTypeMsg.setWindowModality(Qt::ApplicationModal);
    QPushButton* dsm2Mode = bindTypeMsg.addButton("DSM2", QMessageBox::AcceptRole);
    QPushButton* dsmx7Mode = bindTypeMsg.addButton("DSMX (7 channels or less)", QMessageBox::AcceptRole);
    QPushButton* dsmx8Mode = bindTypeMsg.addButton("DSMX (8 channels or more)", QMessageBox::AcceptRole);
    bindTypeMsg.addButton(QMessageBox::Cancel);
    
    bindTypeMsg.setWindowTitle(tr("Spektrum Bind"));
    bindTypeMsg.setText(tr("Place Spektrum satellite receiver in bind mode. Select which mode below."));
    
826
    int bindType = 0;
Don Gagne's avatar
Don Gagne committed
827 828 829 830 831 832 833 834 835 836 837
    if (bindTypeMsg.exec() != QMessageBox::Cancel) {
        if (bindTypeMsg.clickedButton() == dsm2Mode) {
            bindType = 0;
        } else if (bindTypeMsg.clickedButton() == dsmx7Mode) {
            bindType = 1;
        } else if (bindTypeMsg.clickedButton() == dsmx8Mode) {
            bindType = 2;
        } else {
            Q_ASSERT(false);
        }
        _mav->pairRX(0, bindType);
838 839 840
    }
}

Don Gagne's avatar
Don Gagne committed
841 842 843 844 845 846 847 848 849 850
/// @brief Validates the current settings against the calibration rules resetting values as necessary.
void PX4RCCalibration::_validateCalibration(void)
{
    for (int chan = 0; chan<_chanMax; chan++) {
        struct ChannelInfo* info = &_rgChannelInfo[chan];
        
        if (chan < _chanCount) {
            // Validate Min/Max values. Although the channel appears as available we still may
            // not have good min/max/trim values for it. Set to defaults if needed.
            if (info->rcMin > _rcCalPWMValidMinValue || info->rcMax < _rcCalPWMValidMaxValue) {
Don Gagne's avatar
Don Gagne committed
851
                //qDebug() << "_validateCalibration resetting channel" << chan;
Don Gagne's avatar
Don Gagne committed
852 853
                info->rcMin = _rcCalPWMDefaultMinValue;
                info->rcMax = _rcCalPWMDefaultMaxValue;
Don Gagne's avatar
Don Gagne committed
854 855 856 857 858 859 860
                info->rcTrim = info->rcMin + ((info->rcMax - info->rcMin) / 2);
            } else {
                switch (_rgChannelInfo[chan].function) {
                    case rcCalFunctionThrottle:
                    case rcCalFunctionYaw:
                    case rcCalFunctionRoll:
                    case rcCalFunctionPitch:
861 862 863 864 865 866
                        // Make sure trim is within min/max
                        if (info->rcTrim < info->rcMin) {
                            info->rcTrim = info->rcMin;
                        } else if (info->rcTrim > info->rcMax) {
                            info->rcTrim = info->rcMax;
                        }
Don Gagne's avatar
Don Gagne committed
867 868 869 870 871 872 873
                        break;
                    default:
                        // Non-attitude control channels have calculated trim
                        info->rcTrim = info->rcMin + ((info->rcMax - info->rcMin) / 2);
                        break;
                }
                
Don Gagne's avatar
Don Gagne committed
874 875 876
            }
        } else {
            // Unavailable channels are set to defaults
Don Gagne's avatar
Don Gagne committed
877
            //qDebug() << "_validateCalibration resetting unavailable channel" << chan;
Don Gagne's avatar
Don Gagne committed
878 879
            info->rcMin = _rcCalPWMDefaultMinValue;
            info->rcMax = _rcCalPWMDefaultMaxValue;
Don Gagne's avatar
Don Gagne committed
880
            info->rcTrim = info->rcMin + ((info->rcMax - info->rcMin) / 2);
Don Gagne's avatar
Don Gagne committed
881 882 883 884 885 886
            info->reversed = false;
        }
    }
}


887
/// @brief Saves the rc calibration values to the board parameters.
Don Gagne's avatar
Don Gagne committed
888
void PX4RCCalibration::_writeCalibration(void)
889 890 891 892 893
{
    if (!_mav) return;
    
    _mav->endRadioControlCalibration();
    
Don Gagne's avatar
Don Gagne committed
894 895
    _validateCalibration();
    
896 897 898 899 900 901 902 903
    QGCUASParamManagerInterface* paramMgr = _mav->getParamManager();
    Q_ASSERT(paramMgr);
    
    QString minTpl("RC%1_MIN");
    QString maxTpl("RC%1_MAX");
    QString trimTpl("RC%1_TRIM");
    QString revTpl("RC%1_REV");
    
Don Gagne's avatar
Don Gagne committed
904
    // Note that the rc parameters are all float, so you must cast to float in order to get the right QVariant
Don Gagne's avatar
Don Gagne committed
905 906 907
    for (int chan = 0; chan<_chanMax; chan++) {
        struct ChannelInfo* info = &_rgChannelInfo[chan];
        int oneBasedChannel = chan + 1;
Don Gagne's avatar
Don Gagne committed
908 909 910 911
        paramMgr->setPendingParam(0, trimTpl.arg(oneBasedChannel), (float)info->rcTrim);
        paramMgr->setPendingParam(0, minTpl.arg(oneBasedChannel), (float)info->rcMin);
        paramMgr->setPendingParam(0, maxTpl.arg(oneBasedChannel), (float)info->rcMax);
        paramMgr->setPendingParam(0, revTpl.arg(oneBasedChannel), info->reversed ? -1.0f : 1.0f);
912 913
    }
    
Don Gagne's avatar
Don Gagne committed
914 915 916 917 918 919 920 921 922
    // Write function mapping parameters
    for (size_t i=0; i<rcCalFunctionMax; i++) {
        int32_t paramChannel;
        if (_rgFunctionChannelMapping[i] == _chanMax) {
            // 0 signals no mapping
            paramChannel = 0;
        } else {
            // Note that the channel value is 1-based
            paramChannel = _rgFunctionChannelMapping[i] + 1;
923
        }
Don Gagne's avatar
Don Gagne committed
924
        paramMgr->setPendingParam(0, _rgFunctionInfo[i].parameterName, paramChannel);
925 926
    }
    
927 928 929 930 931
    // If the RC_CHAN_COUNT parameter is available write the channel count
    if (paramMgr->getComponentForParam("RC_CHAN_CNT").count() != 0) {
        paramMgr->setPendingParam(0, "RC_CHAN_CNT", _chanCount);
    }

932 933 934
    //let the param mgr manage sending all the pending RC_foo updates and persisting after
    paramMgr->sendPendingParameters(true, true);
    
Don Gagne's avatar
Don Gagne committed
935
    _stopCalibration();
936 937 938 939 940 941
}

void PX4RCCalibration::_updateView()
{
    // Update the available channels
    for (int chan=0; chan<_chanCount; chan++) {
Don Gagne's avatar
Don Gagne committed
942 943 944 945 946
        RCValueWidget* valueWidget = _rgRCValueMonitorWidget[chan];
        
        valueWidget->setVisible(true);
        _rgRCValueMonitorLabel[chan]->setVisible(true);
        //qDebug() << "Visible" << valueWidget->objectName() << chan;
947 948
        
        struct ChannelInfo* info = &_rgChannelInfo[chan];
Don Gagne's avatar
Don Gagne committed
949 950 951
        valueWidget->setValueAndMinMax(_rcRawValue[chan], info->rcMin, info->rcMax);
        valueWidget->setTrim(info->rcTrim);
        valueWidget->setReversed(info->reversed);
952 953
    }
    
Don Gagne's avatar
Don Gagne committed
954 955 956
    // Update attitude controls
    for (int i=0; i<_attitudeControls; i++) {
        struct AttitudeInfo* attitudeInfo = &_rgAttitudeControl[i];
957
        
Don Gagne's avatar
Don Gagne committed
958 959 960 961
        if (_rgFunctionChannelMapping[attitudeInfo->function] != _chanMax) {
            int channel = _rgFunctionChannelMapping[attitudeInfo->function];
            struct ChannelInfo* info = &_rgChannelInfo[channel];
            RCValueWidget* valueWidget = attitudeInfo->valueWidget;
962
            
Don Gagne's avatar
Don Gagne committed
963 964 965
            attitudeInfo->valueWidget->setValueAndMinMax(_rcRawValue[channel], info->rcMin, info->rcMax);
            valueWidget->setTrim(info->rcTrim);
            valueWidget->setReversed(info->reversed);
Don Gagne's avatar
Don Gagne committed
966 967
        }
    }
968
    
Don Gagne's avatar
Don Gagne committed
969 970 971 972 973
    // Hide non-available channels
    for (int chan=_chanCount; chan<_chanMax; chan++) {
        _rgRCValueMonitorWidget[chan]->setVisible(false);
        _rgRCValueMonitorLabel[chan]->setVisible(false);
        //qDebug() << "Off" << _rgRCValueMonitorWidget[chan]->objectName() << chan;
974 975 976
    }
}

Don Gagne's avatar
Don Gagne committed
977 978
/// @brief Starts the calibration process
void PX4RCCalibration::_startCalibration(void)
979 980 981
{
    Q_ASSERT(_chanCount >= _chanMinimum);
    
Don Gagne's avatar
Don Gagne committed
982 983
    _resetInternalCalibrationValues();
    
984
    // Let the mav known we are starting calibration. This should turn off motors and so forth.
Don Gagne's avatar
Don Gagne committed
985
    _mav->startRadioControlCalibration();
986 987 988 989
    
    _ui->rcCalNext->setText(tr("Next"));
    _ui->rcCalCancel->setEnabled(true);
    
Don Gagne's avatar
Don Gagne committed
990 991
    _currentStep = 0;
    _setupCurrentState();
992 993
}

Don Gagne's avatar
Don Gagne committed
994 995
/// @brief Cancels the calibration process, setting things back to initial state.
void PX4RCCalibration::_stopCalibration(void)
996
{
Don Gagne's avatar
Don Gagne committed
997
    _currentStep = -1;
998
    
Don Gagne's avatar
Don Gagne committed
999 1000 1001 1002 1003
    if (_mav) {
        _mav->endRadioControlCalibration();
        _setInternalCalibrationValuesFromParameters();
    } else {
        _resetInternalCalibrationValues();
1004 1005
    }
    
Don Gagne's avatar
Don Gagne committed
1006
    _ui->rcCalStatus->clear();
1007

Don Gagne's avatar
Don Gagne committed
1008
    _ui->rcCalNext->setText(tr("Calibrate"));
1009
    _ui->rcCalNext->setEnabled(true);
Don Gagne's avatar
Don Gagne committed
1010
    _ui->rcCalCancel->setEnabled(false);
1011
    _ui->rcCalSkip->setEnabled(false);
1012 1013
    
    _setHelpImage(_imageCenter);
1014 1015
}

Don Gagne's avatar
Don Gagne committed
1016 1017
/// @brief Saves the current channel values, so that we can detect when the use moves an input.
void PX4RCCalibration::_rcCalSaveCurrentValues(void)
1018
{
Don Gagne's avatar
Don Gagne committed
1019 1020 1021 1022
	//qDebug() << "_rcCalSaveCurrentValues";
    for (unsigned i = 0; i < _chanMax; i++) {
        _rcValueSave[i] = _rcRawValue[i];
    }
1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035
}

/// @brief Set up the Save state of calibration.
void PX4RCCalibration::_rcCalSave(void)
{
    _rcCalState = rcCalStateSave;
    
    _ui->rcCalStatus->setText(tr("The current calibration settings are now displayed for each channel on screen.\n\n"
                                "Click the Next button to upload calibration to board. Click Cancel if you don't want to save these values."));

    _ui->rcCalNext->setEnabled(true);
    _ui->rcCalSkip->setEnabled(false);
    _ui->rcCalCancel->setEnabled(true);
Don Gagne's avatar
Don Gagne committed
1036 1037 1038 1039 1040 1041
    
    // This updates the internal values according to the validation rules. Then _updateView will tick and update ui
    // such that the settings that will be written our are displayed.
    _validateCalibration();
    
    _showMinMaxOnRadioWidgets(true);
1042 1043 1044 1045 1046 1047 1048
}

/// @brief Shows or hides the min/max values of the channel widgets.
///     @param show true: show the min/max values, false: hide the min/max values
void PX4RCCalibration::_showMinMaxOnRadioWidgets(bool show)
{
    // Turn on min/max display for all radio widgets
Don Gagne's avatar
Don Gagne committed
1049
    for (int i=0; i<_chanMax; i++) {
Don Gagne's avatar
Don Gagne committed
1050
        RCValueWidget* radioWidget = _rgRCValueMonitorWidget[i];
1051 1052 1053
        Q_ASSERT(radioWidget);
        
        radioWidget->showMinMax(show);
Don Gagne's avatar
Don Gagne committed
1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064
        if (show) {
            if (radioWidget->min() <= _rcCalPWMValidMinValue) {
                radioWidget->setMinValid(true);
            }
            if (radioWidget->max() >= _rcCalPWMValidMaxValue) {
                radioWidget->setMaxValid(true);
            }
        } else {
            radioWidget->setMinValid(false);
            radioWidget->setMaxValid(false);
        }
1065
    }
Don Gagne's avatar
Don Gagne committed
1066 1067 1068 1069 1070 1071 1072
}

/// @brief Shows or hides the trim values of the channel widgets.
///     @param show true: show the trim values, false: hide the trim values
void PX4RCCalibration::_showTrimOnRadioWidgets(bool show)
{
    // Turn on trim display for all radio widgets
1073
    for (int i=0; i<_chanMax; i++) {
Don Gagne's avatar
Don Gagne committed
1074
        RCValueWidget* radioWidget = _rgRCValueMonitorWidget[i];
1075 1076
        Q_ASSERT(radioWidget);
        
Don Gagne's avatar
Don Gagne committed
1077 1078 1079 1080
        radioWidget->showTrim(show);
    }
}

1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138

void PX4RCCalibration::_loadSettings(void)
{
    QSettings settings;
    
    settings.beginGroup(_settingsGroup);
    _transmitterMode = settings.value(_settingsKeyTransmitterMode, 2).toInt();
    settings.endGroup();
    
    if (_transmitterMode != 1 || _transmitterMode != 2) {
        _transmitterMode = 2;
    }
}

void PX4RCCalibration::_storeSettings(void)
{
    QSettings settings;
    
    settings.beginGroup(_settingsGroup);
    settings.setValue(_settingsKeyTransmitterMode, _transmitterMode);
    settings.endGroup();
}

void PX4RCCalibration::_mode1Toggled(bool checked)
{
    if (checked) {
        _transmitterMode = 1;
        if (_currentStep != -1) {
            const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
            _setHelpImage(state->image);
        }
    }
}

void PX4RCCalibration::_mode2Toggled(bool checked)
{
    if (checked) {
        _transmitterMode = 2;
        if (_currentStep != -1) {
            const stateMachineEntry* state = _getStateMachineEntry(_currentStep);
            _setHelpImage(state->image);
        }
    }
}

void PX4RCCalibration::_setHelpImage(const char* imageFile)
{
    QString file = _imageFilePrefix;
    
    if (_transmitterMode == 1) {
        file += _imageFileMode1Dir;
    } else if (_transmitterMode == 2) {
        file += _imageFileMode2Dir;
    } else {
        Q_ASSERT(false);
    }
    file += imageFile;
    
Don Gagne's avatar
Don Gagne committed
1139
    //qDebug() << "_setHelpImage" << file;
1140 1141 1142
    
    _ui->radioIcon->setPixmap(QPixmap(file));
}