DebugConsole.cc

/*=====================================================================

PIXHAWK Micro Air Vehicle Flying Robotics Toolkit

(c) 2009, 2010 PIXHAWK PROJECT  <http://pixhawk.ethz.ch>

This file is part of the PIXHAWK project

    PIXHAWK is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    PIXHAWK is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with PIXHAWK. If not, see <http://www.gnu.org/licenses/>.

======================================================================*/

/**
 * @file
 *   @brief Debug console
 *
 *   @author Lorenz Meier <mavteam@student.ethz.ch>
 *
 */
#include <QPainter>

#include "DebugConsole.h"
#include "ui_DebugConsole.h"
#include "LinkManager.h"
#include "UASManager.h"
#include "protocol.h"

#include <QDebug>

DebugConsole::DebugConsole(QWidget *parent) :
        QWidget(parent),
        currLink(NULL),
        holdOn(false),
        convertToAscii(true),
        filterMAVLINK(false),
        bytesToIgnore(0),
        lastByte(-1),
        sentBytes(),
        holdBuffer(),
        lineBuffer(""),
        lineBufferTimer(),
        snapShotTimer(),
        snapShotInterval(500),
        snapShotBytes(0),
        dataRate(0.0f),
        lowpassDataRate(0.0f),
        dataRateThreshold(500),
        autoHold(true),
        m_ui(new Ui::DebugConsole)
{
    // Setup basic user interface
    m_ui->setupUi(this);
    // Make text area not editable
    m_ui->receiveText->setReadOnly(true);
    // Limit to 500 lines
    m_ui->receiveText->setMaximumBlockCount(500);
    // Allow to wrap everywhere
    m_ui->receiveText->setWordWrapMode(QTextOption::WrapAnywhere);

    // Enable 10 Hz output
    //connect(&lineBufferTimer, SIGNAL(timeout()), this, SLOT(showData()));
    //lineBufferTimer.setInterval(100); // 100 Hz
    //lineBufferTimer.start();

    // Enable traffic measurements
    connect(&snapShotTimer, SIGNAL(timeout()), this, SLOT(updateTrafficMeasurements()));
    snapShotTimer.setInterval(snapShotInterval);
    snapShotTimer.start();

    // Set hex checkbox checked
    m_ui->hexCheckBox->setChecked(!convertToAscii);
    m_ui->mavlinkCheckBox->setChecked(filterMAVLINK);
    m_ui->holdCheckBox->setChecked(autoHold);

    // Get a list of all existing links
    links = QList<LinkInterface*>();
    foreach (LinkInterface* link, LinkManager::instance()->getLinks())
    {
        addLink(link);
    }

    // Connect to link manager to get notified about new links
    connect(LinkManager::instance(), SIGNAL(newLink(LinkInterface*)), this, SLOT(addLink(LinkInterface*)));
    // Connect link combo box
    connect(m_ui->linkComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(linkSelected(int)));
    // Connect send button
    connect(m_ui->transmitButton, SIGNAL(clicked()), this, SLOT(sendBytes()));
    // Connect HEX conversion and MAVLINK filter checkboxes
    connect(m_ui->mavlinkCheckBox, SIGNAL(clicked(bool)), this, SLOT(MAVLINKfilterEnabled(bool)));
    connect(m_ui->hexCheckBox, SIGNAL(clicked(bool)), this, SLOT(hexModeEnabled(bool)));
    connect(m_ui->holdCheckBox, SIGNAL(clicked(bool)), this, SLOT(setAutoHold(bool)));
    // Connect hold button
    connect(m_ui->holdButton, SIGNAL(toggled(bool)), this, SLOT(hold(bool)));

    this->setVisible(false);
}

DebugConsole::~DebugConsole()
{
    delete m_ui;
}

/**
 * Add a link to the debug console output
 */
void DebugConsole::addLink(LinkInterface* link)
{
    // Add link to link list
    links.insert(link->getId(), link);

    m_ui->linkComboBox->insertItem(link->getId(), link->getName());
    // Set new item as current
    m_ui->linkComboBox->setCurrentIndex(qMax(0, links.size() - 1));

    // Register for name changes
    connect(link, SIGNAL(nameChanged(QString)), this, SLOT(updateLinkName(QString)));
}

void DebugConsole::linkSelected(int linkId)
{
    // Disconnect
    if (currLink != NULL)
    {
        disconnect(currLink, SIGNAL(bytesReceived(LinkInterface*,QByteArray)), this, SLOT(receiveBytes(LinkInterface*, QByteArray)));
    }
    // Clear data
    m_ui->receiveText->clear();

    // Connect new link
    currLink = links[linkId];
    connect(currLink, SIGNAL(bytesReceived(LinkInterface*,QByteArray)), this, SLOT(receiveBytes(LinkInterface*, QByteArray)));
}

/**
 * @param name new name for this link - the link is determined to the sender to this slot by QObject::sender()
 */
void DebugConsole::updateLinkName(QString name)
{
    // Set name if signal came from a link
    LinkInterface* link = qobject_cast<LinkInterface*>(sender());
    if (link != NULL) m_ui->linkComboBox->setItemText(link->getId(), name);
}

void DebugConsole::setAutoHold(bool hold)
{
    // Disable current hold if hold had been enabled
    if (autoHold && holdOn && !hold)
    {
        this->hold(false);
        m_ui->holdButton->setChecked(false);
    }
    // Set new state
    autoHold = hold;
}

/**
 * Prints the message in the UAS color
 */
void DebugConsole::receiveTextMessage(int id, int component, int severity, QString text)
{
    Q_UNUSED(severity);
    m_ui->receiveText->appendHtml(QString("<font color=\"%1\">(MAV%2:%3) %4</font>").arg(UASManager::instance()->getUASForId(id)->getColor().name(), QString::number(id), QString::number(component), text));
}

void DebugConsole::updateTrafficMeasurements()
{
    lowpassDataRate = lowpassDataRate * 0.9f + (0.1f * ((float)snapShotBytes / (float)snapShotInterval) * 1000.0f);
    dataRate = ((float)snapShotBytes / (float)snapShotInterval) * 1000.0f;
    snapShotBytes = 0;

    // Check if limit has been exceeded
    if ((lowpassDataRate > dataRateThreshold) && autoHold)
    {
        // Enable auto-old
        m_ui->holdButton->setChecked(true);
        hold(true);
    }

    QString speed;
    speed = speed.sprintf("%04.1f kB/s", dataRate/1000.0f);
    m_ui->speedLabel->setText(speed);

    if (holdOn)
    {
        //repaint();
    }
}

//QPainter painter(m_ui->receiveText);
//painter.setRenderHint(QPainter::HighQualityAntialiasing);
//painter.translate((this->vwidth/2.0+xCenterOffset)*scalingFactor, (this->vheight/2.0+yCenterOffset)*scalingFactor);

void DebugConsole::paintEvent(QPaintEvent *event)
{
    Q_UNUSED(event);
    // Update bandwidth
    if (holdOn)
    {
        //qDebug() << "Data rate:" << dataRate/1000.0f << "kB/s";
        QString rate("data rate: %1");
        rate.arg(dataRate);
        QPainter painter(this);
        painter.setRenderHint(QPainter::HighQualityAntialiasing);
        painter.translate(width()/5.0f, height()/5.0f);



        //QFont font("Bitstream Vera Sans");
        QFont font = painter.font();
        font.setPixelSize((int)(60.0f));

        QFontMetrics metrics = QFontMetrics(font);
        int border = qMax(4, metrics.leading());
        QRect rect = metrics.boundingRect(0, 0, width() - 2*border, int(height()*0.125),
                                          Qt::AlignLeft | Qt::TextWordWrap, rate);
        painter.setPen(QColor(255, 50, 50));
        painter.setRenderHint(QPainter::TextAntialiasing);
        painter.drawText(QRect(QPoint(static_cast<int>(width()/5.0f), static_cast<int>(height()/5.0f)), QPoint(static_cast<int>(width() - width()/5.0f), static_cast<int>(height() - height()/5.0f))), rate);
        //Qt::AlignRight | Qt::TextWordWrap
    }
}

void DebugConsole::receiveBytes(LinkInterface* link, QByteArray bytes)
{
    snapShotBytes += bytes.size();
    // Only add date from current link
    if (link == currLink && !holdOn)
    {
        // Parse all bytes
        for (int j = 0; j < bytes.size(); j++)
        {
            unsigned char byte = bytes.at(j);
            // Filter MAVLink (http://pixhawk.ethz.ch/mavlink) messages out of the stream.
            if (filterMAVLINK && bytes.size() > 1)
            {
                // Filtering is done by setting an ignore counter based on the MAVLINK packet length
                if (static_cast<unsigned char>(bytes[0]) == MAVLINK_STX) bytesToIgnore = static_cast<unsigned int>(bytes[1]) + MAVLINK_NUM_NON_PAYLOAD_BYTES; // Payload plus header
            }

            if (bytesToIgnore <= 0)
            {
                QString str;
                // Convert to ASCII for readability
                if (convertToAscii)
                {
                    if ((byte < 32) || (byte > 126))
                    {
                        switch (byte)
                        {
                            // Catch line feed
                        case (unsigned char)'\n':
                            m_ui->receiveText->appendPlainText(str);
                            str = "";
                            break;
                            // Catch carriage return
                        case (unsigned char)'\r':
                            // Ignore
                            break;
                        default:
                            str.append(QChar(QChar::ReplacementCharacter));
                            break;
                        }// Append replacement character (box) if char is not ASCII
                    }
                    else
                    {
                        // Append original character
                        str.append(byte);
                    }
                }
                else
                {
                    QString str2;
                    str2.sprintf("%02x ", byte);
                    str.append(str2);
                }
                lineBuffer.append(str);
            }
            else
            {
                if (filterMAVLINK) bytesToIgnore--;
                // Constrain bytes to positive range
                bytesToIgnore = qMax(0, bytesToIgnore);
            }

        }
        m_ui->receiveText->appendPlainText(lineBuffer);
        lineBuffer.clear();

    }
    else if (link == currLink && holdOn)
    {
        holdBuffer.append(bytes);
    }
}

void DebugConsole::sendBytes()
{
    QByteArray transmit;
    QString feedback;
    bool ok = true;
    if (convertToAscii)
    {
        // ASCII text is not converted
        transmit = m_ui->sendText->text().toLatin1();
        feedback = transmit;
    }
    else
    {
        // HEX symbols are converted to bytes
        QString str = m_ui->sendText->text().toLatin1();
        str.remove(' ');
        str.remove("0x");
        str.simplified();
        int bufferIndex = 0;
        if ((str.size() % 2) == 0)
        {
            for (int i = 0; i < str.size(); i=i+2)
            {
                bool okByte;
                QString strBuf = QString(str.at(i));
                strBuf.append(str.at(i+1));
                unsigned char hex = strBuf.toInt(&okByte, 16);
                ok = (ok && okByte);
                transmit[bufferIndex++] = hex;

                if (okByte)
                {
                    // Feedback
                    //feedback.append("0x");
                    feedback.append(str.at(i).toUpper());
                    feedback.append(str.at(i+1).toUpper());
                    feedback.append(" ");
                }
                else
                {
                    feedback = tr("HEX format error near \"") + strBuf + "\"";
                }
            }
        }
        else
        {
            ok = false;
            feedback = tr("HEX values have to be in pairs, e.g. AA or AA 05");
        }
    }

    // Transmit ASCII or HEX formatted text, only if more than one symbol
    if (ok && m_ui->sendText->text().toLatin1().size() > 0)
    {
        // Transmit only if conversion succeeded
        currLink->writeBytes(transmit, transmit.size());
        m_ui->sentText->setText(tr("Sent: ") + feedback);
    }
    else if (m_ui->sendText->text().toLatin1().size() > 0)
    {
        // Conversion failed, display error message
        m_ui->sentText->setText(tr("Not sent: ") + feedback);
    }

    // Select text to easy follow-up input from user
    m_ui->sendText->selectAll();
    m_ui->sendText->setFocus(Qt::OtherFocusReason);
}

/**
 * @param mode true to convert all in and output to/from HEX, false to send and receive ASCII values
 */
void DebugConsole::hexModeEnabled(bool mode)
{
    convertToAscii = !mode;
    m_ui->receiveText->clear();
}

/**
 * @param filter true to ignore all MAVLINK raw data in output, false, to display all incoming data
 */
void DebugConsole::MAVLINKfilterEnabled(bool filter)
{
    filterMAVLINK = filter;
    bytesToIgnore = 0;
}
/**
 * @param hold Freeze the input and thus any scrolling
 */
void DebugConsole::hold(bool hold)
{
    // Check if we need to append bytes from the hold buffer
    if (this->holdOn && !hold)
    {
        m_ui->receiveText->appendPlainText(QString(holdBuffer));
        holdBuffer.clear();
        lowpassDataRate = 0.0f;
    }

    this->holdOn = hold;
}

void DebugConsole::changeEvent(QEvent *e)
{
    QWidget::changeEvent(e);
    switch (e->type()) {
    case QEvent::LanguageChange:
        m_ui->retranslateUi(this);
        break;
    default:
        break;
    }
}