mavlink_msg_manual_control.h

// MESSAGE MANUAL_CONTROL PACKING

#define MAVLINK_MSG_ID_MANUAL_CONTROL 69
#define MAVLINK_MSG_ID_MANUAL_CONTROL_LEN 21
#define MAVLINK_MSG_69_LEN 21
#define MAVLINK_MSG_ID_MANUAL_CONTROL_KEY 0x7F
#define MAVLINK_MSG_69_KEY 0x7F

typedef struct __mavlink_manual_control_t 
{
	float roll;	///< roll
	float pitch;	///< pitch
	float yaw;	///< yaw
	float thrust;	///< thrust
	uint8_t target;	///< The system to be controlled
	uint8_t roll_manual;	///< roll control enabled auto:0, manual:1
	uint8_t pitch_manual;	///< pitch auto:0, manual:1
	uint8_t yaw_manual;	///< yaw auto:0, manual:1
	uint8_t thrust_manual;	///< thrust auto:0, manual:1

} mavlink_manual_control_t;

/**
 * @brief Pack a manual_control message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 *
 * @param target The system to be controlled
 * @param roll roll
 * @param pitch pitch
 * @param yaw yaw
 * @param thrust thrust
 * @param roll_manual roll control enabled auto:0, manual:1
 * @param pitch_manual pitch auto:0, manual:1
 * @param yaw_manual yaw auto:0, manual:1
 * @param thrust_manual thrust auto:0, manual:1
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_manual_control_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, uint8_t target, float roll, float pitch, float yaw, float thrust, uint8_t roll_manual, uint8_t pitch_manual, uint8_t yaw_manual, uint8_t thrust_manual)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	msg->msgid = MAVLINK_MSG_ID_MANUAL_CONTROL;

	p->target = target;	// uint8_t:The system to be controlled
	p->roll = roll;	// float:roll
	p->pitch = pitch;	// float:pitch
	p->yaw = yaw;	// float:yaw
	p->thrust = thrust;	// float:thrust
	p->roll_manual = roll_manual;	// uint8_t:roll control enabled auto:0, manual:1
	p->pitch_manual = pitch_manual;	// uint8_t:pitch auto:0, manual:1
	p->yaw_manual = yaw_manual;	// uint8_t:yaw auto:0, manual:1
	p->thrust_manual = thrust_manual;	// uint8_t:thrust auto:0, manual:1

	return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN);
}

/**
 * @brief Pack a manual_control message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param chan The MAVLink channel this message was sent over
 * @param msg The MAVLink message to compress the data into
 * @param target The system to be controlled
 * @param roll roll
 * @param pitch pitch
 * @param yaw yaw
 * @param thrust thrust
 * @param roll_manual roll control enabled auto:0, manual:1
 * @param pitch_manual pitch auto:0, manual:1
 * @param yaw_manual yaw auto:0, manual:1
 * @param thrust_manual thrust auto:0, manual:1
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_manual_control_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, uint8_t target, float roll, float pitch, float yaw, float thrust, uint8_t roll_manual, uint8_t pitch_manual, uint8_t yaw_manual, uint8_t thrust_manual)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	msg->msgid = MAVLINK_MSG_ID_MANUAL_CONTROL;

	p->target = target;	// uint8_t:The system to be controlled
	p->roll = roll;	// float:roll
	p->pitch = pitch;	// float:pitch
	p->yaw = yaw;	// float:yaw
	p->thrust = thrust;	// float:thrust
	p->roll_manual = roll_manual;	// uint8_t:roll control enabled auto:0, manual:1
	p->pitch_manual = pitch_manual;	// uint8_t:pitch auto:0, manual:1
	p->yaw_manual = yaw_manual;	// uint8_t:yaw auto:0, manual:1
	p->thrust_manual = thrust_manual;	// uint8_t:thrust auto:0, manual:1

	return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN);
}

/**
 * @brief Encode a manual_control struct into a message
 *
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 * @param manual_control C-struct to read the message contents from
 */
static inline uint16_t mavlink_msg_manual_control_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_manual_control_t* manual_control)
{
	return mavlink_msg_manual_control_pack(system_id, component_id, msg, manual_control->target, manual_control->roll, manual_control->pitch, manual_control->yaw, manual_control->thrust, manual_control->roll_manual, manual_control->pitch_manual, manual_control->yaw_manual, manual_control->thrust_manual);
}


#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
/**
 * @brief Send a manual_control message
 * @param chan MAVLink channel to send the message
 *
 * @param target The system to be controlled
 * @param roll roll
 * @param pitch pitch
 * @param yaw yaw
 * @param thrust thrust
 * @param roll_manual roll control enabled auto:0, manual:1
 * @param pitch_manual pitch auto:0, manual:1
 * @param yaw_manual yaw auto:0, manual:1
 * @param thrust_manual thrust auto:0, manual:1
 */
static inline void mavlink_msg_manual_control_send(mavlink_channel_t chan, uint8_t target, float roll, float pitch, float yaw, float thrust, uint8_t roll_manual, uint8_t pitch_manual, uint8_t yaw_manual, uint8_t thrust_manual)
{
	mavlink_header_t hdr;
	mavlink_manual_control_t payload;

	MAVLINK_BUFFER_CHECK_START( chan, MAVLINK_MSG_ID_MANUAL_CONTROL_LEN )
	payload.target = target;	// uint8_t:The system to be controlled
	payload.roll = roll;	// float:roll
	payload.pitch = pitch;	// float:pitch
	payload.yaw = yaw;	// float:yaw
	payload.thrust = thrust;	// float:thrust
	payload.roll_manual = roll_manual;	// uint8_t:roll control enabled auto:0, manual:1
	payload.pitch_manual = pitch_manual;	// uint8_t:pitch auto:0, manual:1
	payload.yaw_manual = yaw_manual;	// uint8_t:yaw auto:0, manual:1
	payload.thrust_manual = thrust_manual;	// uint8_t:thrust auto:0, manual:1

	hdr.STX = MAVLINK_STX;
	hdr.len = MAVLINK_MSG_ID_MANUAL_CONTROL_LEN;
	hdr.msgid = MAVLINK_MSG_ID_MANUAL_CONTROL;
	hdr.sysid = mavlink_system.sysid;
	hdr.compid = mavlink_system.compid;
	hdr.seq = mavlink_get_channel_status(chan)->current_tx_seq;
	mavlink_get_channel_status(chan)->current_tx_seq = hdr.seq + 1;
	mavlink_send_mem(chan, (uint8_t *)&hdr.STX, MAVLINK_NUM_HEADER_BYTES );

	crc_init(&hdr.ck);
	crc_calculate_mem((uint8_t *)&hdr.len, &hdr.ck, MAVLINK_CORE_HEADER_LEN);
	crc_calculate_mem((uint8_t *)&payload, &hdr.ck, hdr.len );
	crc_accumulate( 0x7F, &hdr.ck); /// include key in X25 checksum
	mavlink_send_mem(chan, (uint8_t *)&hdr.ck, MAVLINK_NUM_CHECKSUM_BYTES);
	MAVLINK_BUFFER_CHECK_END
}

#endif
// MESSAGE MANUAL_CONTROL UNPACKING

/**
 * @brief Get field target from manual_control message
 *
 * @return The system to be controlled
 */
static inline uint8_t mavlink_msg_manual_control_get_target(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (uint8_t)(p->target);
}

/**
 * @brief Get field roll from manual_control message
 *
 * @return roll
 */
static inline float mavlink_msg_manual_control_get_roll(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (float)(p->roll);
}

/**
 * @brief Get field pitch from manual_control message
 *
 * @return pitch
 */
static inline float mavlink_msg_manual_control_get_pitch(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (float)(p->pitch);
}

/**
 * @brief Get field yaw from manual_control message
 *
 * @return yaw
 */
static inline float mavlink_msg_manual_control_get_yaw(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (float)(p->yaw);
}

/**
 * @brief Get field thrust from manual_control message
 *
 * @return thrust
 */
static inline float mavlink_msg_manual_control_get_thrust(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (float)(p->thrust);
}

/**
 * @brief Get field roll_manual from manual_control message
 *
 * @return roll control enabled auto:0, manual:1
 */
static inline uint8_t mavlink_msg_manual_control_get_roll_manual(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (uint8_t)(p->roll_manual);
}

/**
 * @brief Get field pitch_manual from manual_control message
 *
 * @return pitch auto:0, manual:1
 */
static inline uint8_t mavlink_msg_manual_control_get_pitch_manual(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (uint8_t)(p->pitch_manual);
}

/**
 * @brief Get field yaw_manual from manual_control message
 *
 * @return yaw auto:0, manual:1
 */
static inline uint8_t mavlink_msg_manual_control_get_yaw_manual(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (uint8_t)(p->yaw_manual);
}

/**
 * @brief Get field thrust_manual from manual_control message
 *
 * @return thrust auto:0, manual:1
 */
static inline uint8_t mavlink_msg_manual_control_get_thrust_manual(const mavlink_message_t* msg)
{
	mavlink_manual_control_t *p = (mavlink_manual_control_t *)&msg->payload[0];
	return (uint8_t)(p->thrust_manual);
}

/**
 * @brief Decode a manual_control message into a struct
 *
 * @param msg The message to decode
 * @param manual_control C-struct to decode the message contents into
 */
static inline void mavlink_msg_manual_control_decode(const mavlink_message_t* msg, mavlink_manual_control_t* manual_control)
{
	memcpy( manual_control, msg->payload, sizeof(mavlink_manual_control_t));
}