/*===================================================================== QGroundControl Open Source Ground Control Station (c) 2009 - 2015 QGROUNDCONTROL PROJECT This file is part of the QGROUNDCONTROL project QGROUNDCONTROL is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. QGROUNDCONTROL is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with QGROUNDCONTROL. If not, see . ======================================================================*/ import QtQuick 2.2 import QtQuick.Controls 1.2 import QtQuick.Controls.Styles 1.2 import QtQuick.Dialogs 1.2 import QGroundControl.FactSystem 1.0 import QGroundControl.FactControls 1.0 import QGroundControl.Palette 1.0 import QGroundControl.Controls 1.0 import QGroundControl.ScreenTools 1.0 import QGroundControl.Controllers 1.0 QGCView { id: rootQGCView viewComponent: view // Help text which is shown both in the status text area prior to pressing a cal button and in the // pre-calibration dialog. readonly property string compassHelp: "For Compass calibration you will need to rotate your vehicle through a number of positions. For this calibration it is best " + "to be connected to your vehicle via radio instead of USB, since the USB cable will likely get in the way." readonly property string gyroHelp: "For Gyroscope calibration you will need to place your vehicle right side up on solid surface and leave it still." readonly property string accelHelp: "For Accelerometer calibration you will need to place your vehicle on all six sides and hold it still in each orientation for a few seconds." readonly property string airspeedHelp: "For Airspeed calibration you will need to keep your airspeed sensor out of any wind and then blow across the sensor." readonly property string statusTextAreaDefaultText: compassHelp + "\n\n" + gyroHelp + "\n\n" + accelHelp + "\n\n" + airspeedHelp + "\n\n" // Used to pass what type of calibration is being performed to the preCalibrationDialog property string preCalibrationDialogType // Used to pass help text to the preCalibrationDialog dialog property string preCalibrationDialogHelp readonly property int rotationColumnWidth: 200 readonly property var rotations: [ "ROTATION_NONE", "ROTATION_YAW_45", "ROTATION_YAW_90", "ROTATION_YAW_135", "ROTATION_YAW_180", "ROTATION_YAW_225", "ROTATION_YAW_270", "ROTATION_YAW_315", "ROTATION_ROLL_180", "ROTATION_ROLL_180_YAW_45", "ROTATION_ROLL_180_YAW_90", "ROTATION_ROLL_180_YAW_135", "ROTATION_PITCH_180", "ROTATION_ROLL_180_YAW_225", "ROTATION_ROLL_180_YAW_270", "ROTATION_ROLL_180_YAW_315", "ROTATION_ROLL_90", "ROTATION_ROLL_90_YAW_45", "ROTATION_ROLL_90_YAW_90", "ROTATION_ROLL_90_YAW_135", "ROTATION_ROLL_270", "ROTATION_ROLL_270_YAW_45", "ROTATION_ROLL_270_YAW_90", "ROTATION_ROLL_270_YAW_135", "ROTATION_PITCH_90", "ROTATION_PITCH_270", "ROTATION_ROLL_270_YAW_270" ] Fact { id: cal_mag0_id; name: "CAL_MAG0_ID"; onFactMissing: showMissingFactOverlay(name) } Fact { id: cal_mag1_id; name: "CAL_MAG1_ID"; onFactMissing: showMissingFactOverlay(name) } Fact { id: cal_mag2_id; name: "CAL_MAG2_ID"; onFactMissing: showMissingFactOverlay(name) } Fact { id: cal_mag0_rot; name: "CAL_MAG0_ROT"; onFactMissing: showMissingFactOverlay(name) } Fact { id: cal_mag1_rot; name: "CAL_MAG1_ROT"; onFactMissing: showMissingFactOverlay(name) } Fact { id: cal_mag2_rot; name: "CAL_MAG2_ROT"; onFactMissing: showMissingFactOverlay(name) } // Id > = signals compass available, rot < 0 signals internal compass property bool showCompass0Rot: cal_mag0_id.value > 0 && cal_mag0_rot.value >= 0 property bool showCompass1Rot: cal_mag1_id.value > 0 && cal_mag1_rot.value >= 0 property bool showCompass2Rot: cal_mag2_id.value > 0 && cal_mag2_rot.value >= 0 SensorsComponentController { id: controller onResetStatusTextArea: statusLog.text = statusTextAreaDefaultText onSetCompassRotations: { if (showCompass0Rot || showCompass1Rot || showCompass2Rot) { showDialog(compassRotationDialogComponent, "Set Compass Rotation(s)", 50, StandardButton.Ok) } } onWaitingForCancelChanged: { if (controller.waitingForCancel) { showMessage("Calibration Cancel", "Waiting for Vehicle to response to Cancel. This may take a few seconds.", 0) } else { hideDialog() } } } Component { id: preCalibrationDialogComponent QGCViewDialog { id: preCalibrationDialog function accept() { if (preCalibrationDialogType == "gyro") { controller.calibrateGyro() } else if (preCalibrationDialogType == "accel") { controller.calibrateAccel() } else if (preCalibrationDialogType == "compass") { controller.calibrateCompass() } else if (preCalibrationDialogType == "airspeed") { controller.calibrateAirspeed() } preCalibrationDialog.hideDialog() } Column { anchors.fill: parent spacing: 10 QGCLabel { width: parent.width wrapMode: Text.WordWrap text: preCalibrationDialogHelp } QGCLabel { width: parent.width wrapMode: Text.WordWrap visible: preCalibrationDialogType != "airspeed" text: "Please check and/or update board rotation before calibrating." } FactComboBox { width: rotationColumnWidth model: rotations visible: preCalibrationDialogType != "airspeed" fact: Fact { name: "SENS_BOARD_ROT"; onFactMissing: showMissingFactOverlay(name) } } } } } Component { id: compassRotationDialogComponent QGCViewDialog { id: compassRotationDialog Column { anchors.fill: parent spacing: 10 QGCLabel { width: parent.width wrapMode: Text.WordWrap text: "Please check and/or update compass rotation(s)" } // Compass 0 rotation Component { id: compass0ComponentLabel QGCLabel { text: "Compass Orientation" } } Component { id: compass0ComponentCombo FactComboBox { id: compass0RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG0_ROT"; onFactMissing: showMissingFactOverlay(name) } } } Loader { sourceComponent: showCompass0Rot ? compass0ComponentLabel : null } Loader { sourceComponent: showCompass0Rot ? compass0ComponentCombo : null } // Compass 1 rotation Component { id: compass1ComponentLabel QGCLabel { text: "Compass 1 Orientation" } } Component { id: compass1ComponentCombo FactComboBox { id: compass1RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG1_ROT"; onFactMissing: showMissingFactOverlay(name) } } } Loader { sourceComponent: showCompass1Rot ? compass1ComponentLabel : null } Loader { sourceComponent: showCompass1Rot ? compass1ComponentCombo : null } // Compass 2 rotation Component { id: compass2ComponentLabel QGCLabel { text: "Compass 2 Orientation" } } Component { id: compass2ComponentCombo FactComboBox { id: compass1RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG2_ROT"; onFactMissing: showMissingFactOverlay(name) } } } Loader { sourceComponent: showCompass2Rot ? compass2ComponentLabel : null } Loader { sourceComponent: showCompass2Rot ? compass2ComponentCombo : null } } // Column } // QGCViewDialog } // Component - compassRotationDialogComponent Component { id: view QGCViewPanel { id: viewPanel Connections { target: rootQGCView onCompleted: { controller.factPanel = viewPanel controller.statusLog = statusTextArea controller.progressBar = progressBar controller.compassButton = compassButton controller.gyroButton = gyroButton controller.accelButton = accelButton controller.airspeedButton = airspeedButton controller.cancelButton = cancelButton controller.orientationCalAreaHelpText = orientationCalAreaHelpText } } QGCPalette { id: qgcPal; colorGroupEnabled: enabled } color: qgcPal.window Column { anchors.fill: parent QGCLabel { text: "SENSORS CONFIG" font.pointSize: ScreenTools.fontPointFactor * (20); } Item { height: 20; width: 10 } // spacer Row { readonly property int buttonWidth: 120 spacing: 20 QGCLabel { text: "Calibrate:"; anchors.baseline: compassButton.baseline } IndicatorButton { property Fact fact: Fact { name: "CAL_MAG0_ID" } id: compassButton width: parent.buttonWidth text: "Compass" indicatorGreen: fact.value != 0 onClicked: { preCalibrationDialogType = "compass" preCalibrationDialogHelp = compassHelp showDialog(preCalibrationDialogComponent, "Calibrate Compass", 50, StandardButton.Cancel | StandardButton.Ok) } } IndicatorButton { property Fact fact: Fact { name: "CAL_GYRO0_ID" } id: gyroButton width: parent.buttonWidth text: "Gyroscope" indicatorGreen: fact.value != 0 onClicked: { preCalibrationDialogType = "gyro" preCalibrationDialogHelp = gyroHelp showDialog(preCalibrationDialogComponent, "Calibrate Gyro", 50, StandardButton.Cancel | StandardButton.Ok) } } IndicatorButton { property Fact fact: Fact { name: "CAL_ACC0_ID" } id: accelButton width: parent.buttonWidth text: "Accelerometer" indicatorGreen: fact.value != 0 onClicked: { preCalibrationDialogType = "accel" preCalibrationDialogHelp = accelHelp showDialog(preCalibrationDialogComponent, "Calibrate Accelerometer", 50, StandardButton.Cancel | StandardButton.Ok) } } IndicatorButton { property Fact fact: Fact { name: "SENS_DPRES_OFF" } id: airspeedButton width: parent.buttonWidth text: "Airspeed" visible: controller.fixedWing indicatorGreen: fact.value != 0 onClicked: { preCalibrationDialogType = "airspeed" preCalibrationDialogHelp = airspeedHelp showDialog(preCalibrationDialogComponent, "Calibrate Airspeed", 50, StandardButton.Cancel | StandardButton.Ok) } } QGCButton { id: cancelButton text: "Cancel" enabled: false onClicked: controller.cancelCalibration() } } Item { height: 20; width: 10 } // spacer ProgressBar { id: progressBar width: parent.width - rotationColumnWidth } Item { height: 10; width: 10 } // spacer Item { readonly property int calibrationAreaHeight: 300 property int calDisplayAreaWidth: parent.width - rotationColumnWidth width: parent.width height: parent.height - y TextArea { id: statusTextArea width: parent.calDisplayAreaWidth height: parent.height readOnly: true frameVisible: false text: statusTextAreaDefaultText style: TextAreaStyle { textColor: qgcPal.text backgroundColor: qgcPal.windowShade } } Rectangle { id: orientationCalArea width: parent.calDisplayAreaWidth height: parent.height visible: controller.showOrientationCalArea color: qgcPal.windowShade QGCLabel { id: orientationCalAreaHelpText width: parent.width wrapMode: Text.WordWrap font.pointSize: ScreenTools.fontPointFactor * (17); } Flow { y: orientationCalAreaHelpText.height width: parent.width height: parent.height - orientationCalAreaHelpText.implicitHeight spacing: 5 VehicleRotationCal { visible: controller.orientationCalDownSideVisible calValid: controller.orientationCalDownSideDone calInProgress: controller.orientationCalDownSideInProgress calInProgressText: controller.orientationCalDownSideRotate ? "Rotate" : "Hold Still" imageSource: controller.orientationCalDownSideRotate ? "qrc:///qml/VehicleDownRotate.png" : "qrc:///qml/VehicleDown.png" } VehicleRotationCal { visible: controller.orientationCalUpsideDownSideVisible calValid: controller.orientationCalUpsideDownSideDone calInProgress: controller.orientationCalUpsideDownSideInProgress calInProgressText: "Hold Still" imageSource: "qrc:///qml/VehicleUpsideDown.png" } VehicleRotationCal { visible: controller.orientationCalNoseDownSideVisible calValid: controller.orientationCalNoseDownSideDone calInProgress: controller.orientationCalNoseDownSideInProgress calInProgressText: controller.orientationCalNoseDownSideRotate ? "Rotate" : "Hold Still" imageSource: controller.orientationCalNoseDownSideRotate ? "qrc:///qml/VehicleNoseDownRotate.png" : "qrc:///qml/VehicleNoseDown.png" } VehicleRotationCal { visible: controller.orientationCalTailDownSideVisible calValid: controller.orientationCalTailDownSideDone calInProgress: controller.orientationCalTailDownSideInProgress calInProgressText: "Hold Still" imageSource: "qrc:///qml/VehicleTailDown.png" } VehicleRotationCal { visible: controller.orientationCalLeftSideVisible calValid: controller.orientationCalLeftSideDone calInProgress: controller.orientationCalLeftSideInProgress calInProgressText: controller.orientationCalLeftSideRotate ? "Rotate" : "Hold Still" imageSource: controller.orientationCalLeftSideRotate ? "qrc:///qml/VehicleLeftRotate.png" : "qrc:///qml/VehicleLeft.png" } VehicleRotationCal { visible: controller.orientationCalRightSideVisible calValid: controller.orientationCalRightSideDone calInProgress: controller.orientationCalRightSideInProgress calInProgressText: "Hold Still" imageSource: "qrc:///qml/VehicleRight.png" } } } Column { x: parent.width - rotationColumnWidth QGCLabel { text: "Autpilot Orientation" } FactComboBox { id: boardRotationCombo width: rotationColumnWidth; model: rotations fact: Fact { name: "SENS_BOARD_ROT" } } // Compass 0 rotation Component { id: compass0ComponentLabel2 QGCLabel { text: "Compass Orientation" } } Component { id: compass0ComponentCombo2 FactComboBox { id: compass0RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG0_ROT" } } } Loader { sourceComponent: showCompass0Rot ? compass0ComponentLabel2 : null } Loader { sourceComponent: showCompass0Rot ? compass0ComponentCombo2 : null } // Compass 1 rotation Component { id: compass1ComponentLabel2 QGCLabel { text: "Compass 1 Orientation" } } Component { id: compass1ComponentCombo2 FactComboBox { id: compass1RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG1_ROT" } } } Loader { sourceComponent: showCompass1Rot ? compass1ComponentLabel2 : null } Loader { sourceComponent: showCompass1Rot ? compass1ComponentCombo2 : null } // Compass 2 rotation Component { id: compass2ComponentLabel2 QGCLabel { text: "Compass 2 Orientation" } } Component { id: compass2ComponentCombo2 FactComboBox { id: compass1RotationCombo width: rotationColumnWidth model: rotations fact: Fact { name: "CAL_MAG2_ROT" } } } Loader { sourceComponent: showCompass2Rot ? compass2ComponentLabel2 : null } Loader { sourceComponent: showCompass2Rot ? compass2ComponentCombo2 : null } } } } } // Rectangle } // Component - view }