/** * \file PolygonArea.hpp * \brief Header for GeographicLib::PolygonAreaT class * * Copyright (c) Charles Karney (2010-2019) and licensed * under the MIT/X11 License. For more information, see * https://geographiclib.sourceforge.io/ **********************************************************************/ #if !defined(GEOGRAPHICLIB_POLYGONAREA_HPP) #define GEOGRAPHICLIB_POLYGONAREA_HPP 1 #include #include #include #include namespace GeographicLib { /** * \brief Polygon areas * * This computes the area of a polygon whose edges are geodesics using the * method given in Section 6 of * - C. F. F. Karney, * * Algorithms for geodesics, * J. Geodesy 87, 43--55 (2013); * DOI: * 10.1007/s00190-012-0578-z; * addenda: * * geod-addenda.html. * * Arbitrarily complex polygons are allowed. In the case self-intersecting * of polygons the area is accumulated "algebraically", e.g., the areas of * the 2 loops in a figure-8 polygon will partially cancel. * * This class lets you add vertices and edges one at a time to the polygon. * The sequence must start with a vertex and thereafter vertices and edges * can be added in any order. Any vertex after the first creates a new edge * which is the \e shortest geodesic from the previous vertex. In some * cases there may be two or many such shortest geodesics and the area is * then not uniquely defined. In this case, either add an intermediate * vertex or add the edge \e as an edge (by defining its direction and * length). * * The area and perimeter are accumulated at two times the standard floating * point precision to guard against the loss of accuracy with many-sided * polygons. At any point you can ask for the perimeter and area so far. * There's an option to treat the points as defining a polyline instead of a * polygon; in that case, only the perimeter is computed. * * This is a templated class to allow it to be used with Geodesic, * GeodesicExact, and Rhumb. GeographicLib::PolygonArea, * GeographicLib::PolygonAreaExact, and GeographicLib::PolygonAreaRhumb are * typedefs for these cases. * * @tparam GeodType the geodesic class to use. * * Example of use: * \include example-PolygonArea.cpp * * Planimeter is a command-line utility * providing access to the functionality of PolygonAreaT. **********************************************************************/ template class PolygonAreaT { private: typedef Math::real real; GeodType _earth; real _area0; // Full ellipsoid area bool _polyline; // Assume polyline (don't close and skip area) unsigned _mask; unsigned _num; int _crossings; Accumulator<> _areasum, _perimetersum; real _lat0, _lon0, _lat1, _lon1; static int transit(real lon1, real lon2) { // Return 1 or -1 if crossing prime meridian in east or west direction. // Otherwise return zero. // Compute lon12 the same way as Geodesic::Inverse. lon1 = Math::AngNormalize(lon1); lon2 = Math::AngNormalize(lon2); real lon12 = Math::AngDiff(lon1, lon2); // Treat 0 as negative in these tests. This balances +/- 180 being // treated as positive, i.e., +180. int cross = lon1 <= 0 && lon2 > 0 && lon12 > 0 ? 1 : (lon2 <= 0 && lon1 > 0 && lon12 < 0 ? -1 : 0); return cross; } // an alternate version of transit to deal with longitudes in the direct // problem. static int transitdirect(real lon1, real lon2) { // Compute exactly the parity of // int(ceil(lon2 / 360)) - int(ceil(lon1 / 360)) lon1 = Math::remainder(lon1, real(720)); lon2 = Math::remainder(lon2, real(720)); return ( (lon2 <= 0 && lon2 > -360 ? 1 : 0) - (lon1 <= 0 && lon1 > -360 ? 1 : 0) ); } void Remainder(Accumulator<>& a) const { a.remainder(_area0); } void Remainder(real& a) const { a = Math::remainder(a, _area0); } template void AreaReduce(T& area, int crossings, bool reverse, bool sign) const; public: /** * Constructor for PolygonAreaT. * * @param[in] earth the Geodesic object to use for geodesic calculations. * @param[in] polyline if true that treat the points as defining a polyline * instead of a polygon (default = false). **********************************************************************/ PolygonAreaT(const GeodType& earth, bool polyline = false) : _earth(earth) , _area0(_earth.EllipsoidArea()) , _polyline(polyline) , _mask(GeodType::LATITUDE | GeodType::LONGITUDE | GeodType::DISTANCE | (_polyline ? GeodType::NONE : GeodType::AREA | GeodType::LONG_UNROLL)) { Clear(); } /** * Clear PolygonAreaT, allowing a new polygon to be started. **********************************************************************/ void Clear() { _num = 0; _crossings = 0; _areasum = 0; _perimetersum = 0; _lat0 = _lon0 = _lat1 = _lon1 = Math::NaN(); } /** * Add a point to the polygon or polyline. * * @param[in] lat the latitude of the point (degrees). * @param[in] lon the longitude of the point (degrees). * * \e lat should be in the range [−90°, 90°]. **********************************************************************/ void AddPoint(real lat, real lon); /** * Add an edge to the polygon or polyline. * * @param[in] azi azimuth at current point (degrees). * @param[in] s distance from current point to next point (meters). * * This does nothing if no points have been added yet. Use * PolygonAreaT::CurrentPoint to determine the position of the new vertex. **********************************************************************/ void AddEdge(real azi, real s); /** * Return the results so far. * * @param[in] reverse if true then clockwise (instead of counter-clockwise) * traversal counts as a positive area. * @param[in] sign if true then return a signed result for the area if * the polygon is traversed in the "wrong" direction instead of returning * the area for the rest of the earth. * @param[out] perimeter the perimeter of the polygon or length of the * polyline (meters). * @param[out] area the area of the polygon (meters2); only set * if \e polyline is false in the constructor. * @return the number of points. * * More points can be added to the polygon after this call. **********************************************************************/ unsigned Compute(bool reverse, bool sign, real& perimeter, real& area) const; /** * Return the results assuming a tentative final test point is added; * however, the data for the test point is not saved. This lets you report * a running result for the perimeter and area as the user moves the mouse * cursor. Ordinary floating point arithmetic is used to accumulate the * data for the test point; thus the area and perimeter returned are less * accurate than if PolygonAreaT::AddPoint and PolygonAreaT::Compute are * used. * * @param[in] lat the latitude of the test point (degrees). * @param[in] lon the longitude of the test point (degrees). * @param[in] reverse if true then clockwise (instead of counter-clockwise) * traversal counts as a positive area. * @param[in] sign if true then return a signed result for the area if * the polygon is traversed in the "wrong" direction instead of returning * the area for the rest of the earth. * @param[out] perimeter the approximate perimeter of the polygon or length * of the polyline (meters). * @param[out] area the approximate area of the polygon * (meters2); only set if polyline is false in the * constructor. * @return the number of points. * * \e lat should be in the range [−90°, 90°]. **********************************************************************/ unsigned TestPoint(real lat, real lon, bool reverse, bool sign, real& perimeter, real& area) const; /** * Return the results assuming a tentative final test point is added via an * azimuth and distance; however, the data for the test point is not saved. * This lets you report a running result for the perimeter and area as the * user moves the mouse cursor. Ordinary floating point arithmetic is used * to accumulate the data for the test point; thus the area and perimeter * returned are less accurate than if PolygonAreaT::AddEdge and * PolygonAreaT::Compute are used. * * @param[in] azi azimuth at current point (degrees). * @param[in] s distance from current point to final test point (meters). * @param[in] reverse if true then clockwise (instead of counter-clockwise) * traversal counts as a positive area. * @param[in] sign if true then return a signed result for the area if * the polygon is traversed in the "wrong" direction instead of returning * the area for the rest of the earth. * @param[out] perimeter the approximate perimeter of the polygon or length * of the polyline (meters). * @param[out] area the approximate area of the polygon * (meters2); only set if polyline is false in the * constructor. * @return the number of points. **********************************************************************/ unsigned TestEdge(real azi, real s, bool reverse, bool sign, real& perimeter, real& area) const; /** \name Inspector functions **********************************************************************/ ///@{ /** * @return \e a the equatorial radius of the ellipsoid (meters). This is * the value inherited from the Geodesic object used in the constructor. **********************************************************************/ Math::real EquatorialRadius() const { return _earth.EquatorialRadius(); } /** * @return \e f the flattening of the ellipsoid. This is the value * inherited from the Geodesic object used in the constructor. **********************************************************************/ Math::real Flattening() const { return _earth.Flattening(); } /** * Report the previous vertex added to the polygon or polyline. * * @param[out] lat the latitude of the point (degrees). * @param[out] lon the longitude of the point (degrees). * * If no points have been added, then NaNs are returned. Otherwise, \e lon * will be in the range [−180°, 180°]. **********************************************************************/ void CurrentPoint(real& lat, real& lon) const { lat = _lat1; lon = _lon1; } /** * \deprecated An old name for EquatorialRadius(). **********************************************************************/ // GEOGRAPHICLIB_DEPRECATED("Use EquatorialRadius()") Math::real MajorRadius() const { return EquatorialRadius(); } ///@} }; /** * @relates PolygonAreaT * * Polygon areas using Geodesic. This should be used if the flattening is * small. **********************************************************************/ typedef PolygonAreaT PolygonArea; /** * @relates PolygonAreaT * * Polygon areas using GeodesicExact. (But note that the implementation of * areas in GeodesicExact uses a high order series and this is only accurate * for modest flattenings.) **********************************************************************/ typedef PolygonAreaT PolygonAreaExact; /** * @relates PolygonAreaT * * Polygon areas using Rhumb. **********************************************************************/ typedef PolygonAreaT PolygonAreaRhumb; } // namespace GeographicLib #endif // GEOGRAPHICLIB_POLYGONAREA_HPP