// MESSAGE LOCAL_POSITION_SETPOINT_SET PACKING #define MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_SET 50 typedef struct __mavlink_local_position_setpoint_set_t { uint8_t target_system; ///< System ID uint8_t target_component; ///< Component ID float x; ///< x position float y; ///< y position float z; ///< z position float yaw; ///< Desired yaw angle } mavlink_local_position_setpoint_set_t; /** * @brief Pack a local_position_setpoint_set message * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param msg The MAVLink message to compress the data into * * @param target_system System ID * @param target_component Component ID * @param x x position * @param y y position * @param z z position * @param yaw Desired yaw angle * @return length of the message in bytes (excluding serial stream start sign) */ static inline uint16_t mavlink_msg_local_position_setpoint_set_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, uint8_t target_system, uint8_t target_component, float x, float y, float z, float yaw) { uint16_t i = 0; msg->msgid = MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_SET; i += put_uint8_t_by_index(target_system, i, msg->payload); // System ID i += put_uint8_t_by_index(target_component, i, msg->payload); // Component ID i += put_float_by_index(x, i, msg->payload); // x position i += put_float_by_index(y, i, msg->payload); // y position i += put_float_by_index(z, i, msg->payload); // z position i += put_float_by_index(yaw, i, msg->payload); // Desired yaw angle return mavlink_finalize_message(msg, system_id, component_id, i); } /** * @brief Pack a local_position_setpoint_set message * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param chan The MAVLink channel this message was sent over * @param msg The MAVLink message to compress the data into * @param target_system System ID * @param target_component Component ID * @param x x position * @param y y position * @param z z position * @param yaw Desired yaw angle * @return length of the message in bytes (excluding serial stream start sign) */ static inline uint16_t mavlink_msg_local_position_setpoint_set_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, uint8_t target_system, uint8_t target_component, float x, float y, float z, float yaw) { uint16_t i = 0; msg->msgid = MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_SET; i += put_uint8_t_by_index(target_system, i, msg->payload); // System ID i += put_uint8_t_by_index(target_component, i, msg->payload); // Component ID i += put_float_by_index(x, i, msg->payload); // x position i += put_float_by_index(y, i, msg->payload); // y position i += put_float_by_index(z, i, msg->payload); // z position i += put_float_by_index(yaw, i, msg->payload); // Desired yaw angle return mavlink_finalize_message_chan(msg, system_id, component_id, chan, i); } /** * @brief Encode a local_position_setpoint_set struct into a message * * @param system_id ID of this system * @param component_id ID of this component (e.g. 200 for IMU) * @param msg The MAVLink message to compress the data into * @param local_position_setpoint_set C-struct to read the message contents from */ static inline uint16_t mavlink_msg_local_position_setpoint_set_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_local_position_setpoint_set_t* local_position_setpoint_set) { return mavlink_msg_local_position_setpoint_set_pack(system_id, component_id, msg, local_position_setpoint_set->target_system, local_position_setpoint_set->target_component, local_position_setpoint_set->x, local_position_setpoint_set->y, local_position_setpoint_set->z, local_position_setpoint_set->yaw); } /** * @brief Send a local_position_setpoint_set message * @param chan MAVLink channel to send the message * * @param target_system System ID * @param target_component Component ID * @param x x position * @param y y position * @param z z position * @param yaw Desired yaw angle */ #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS static inline void mavlink_msg_local_position_setpoint_set_send(mavlink_channel_t chan, uint8_t target_system, uint8_t target_component, float x, float y, float z, float yaw) { mavlink_message_t msg; mavlink_msg_local_position_setpoint_set_pack_chan(mavlink_system.sysid, mavlink_system.compid, chan, &msg, target_system, target_component, x, y, z, yaw); mavlink_send_uart(chan, &msg); } #endif // MESSAGE LOCAL_POSITION_SETPOINT_SET UNPACKING /** * @brief Get field target_system from local_position_setpoint_set message * * @return System ID */ static inline uint8_t mavlink_msg_local_position_setpoint_set_get_target_system(const mavlink_message_t* msg) { return (uint8_t)(msg->payload)[0]; } /** * @brief Get field target_component from local_position_setpoint_set message * * @return Component ID */ static inline uint8_t mavlink_msg_local_position_setpoint_set_get_target_component(const mavlink_message_t* msg) { return (uint8_t)(msg->payload+sizeof(uint8_t))[0]; } /** * @brief Get field x from local_position_setpoint_set message * * @return x position */ static inline float mavlink_msg_local_position_setpoint_set_get_x(const mavlink_message_t* msg) { generic_32bit r; r.b[3] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t))[0]; r.b[2] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t))[1]; r.b[1] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t))[2]; r.b[0] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t))[3]; return (float)r.f; } /** * @brief Get field y from local_position_setpoint_set message * * @return y position */ static inline float mavlink_msg_local_position_setpoint_set_get_y(const mavlink_message_t* msg) { generic_32bit r; r.b[3] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float))[0]; r.b[2] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float))[1]; r.b[1] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float))[2]; r.b[0] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float))[3]; return (float)r.f; } /** * @brief Get field z from local_position_setpoint_set message * * @return z position */ static inline float mavlink_msg_local_position_setpoint_set_get_z(const mavlink_message_t* msg) { generic_32bit r; r.b[3] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float))[0]; r.b[2] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float))[1]; r.b[1] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float))[2]; r.b[0] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float))[3]; return (float)r.f; } /** * @brief Get field yaw from local_position_setpoint_set message * * @return Desired yaw angle */ static inline float mavlink_msg_local_position_setpoint_set_get_yaw(const mavlink_message_t* msg) { generic_32bit r; r.b[3] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float)+sizeof(float))[0]; r.b[2] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float)+sizeof(float))[1]; r.b[1] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float)+sizeof(float))[2]; r.b[0] = (msg->payload+sizeof(uint8_t)+sizeof(uint8_t)+sizeof(float)+sizeof(float)+sizeof(float))[3]; return (float)r.f; } /** * @brief Decode a local_position_setpoint_set message into a struct * * @param msg The message to decode * @param local_position_setpoint_set C-struct to decode the message contents into */ static inline void mavlink_msg_local_position_setpoint_set_decode(const mavlink_message_t* msg, mavlink_local_position_setpoint_set_t* local_position_setpoint_set) { local_position_setpoint_set->target_system = mavlink_msg_local_position_setpoint_set_get_target_system(msg); local_position_setpoint_set->target_component = mavlink_msg_local_position_setpoint_set_get_target_component(msg); local_position_setpoint_set->x = mavlink_msg_local_position_setpoint_set_get_x(msg); local_position_setpoint_set->y = mavlink_msg_local_position_setpoint_set_get_y(msg); local_position_setpoint_set->z = mavlink_msg_local_position_setpoint_set_get_z(msg); local_position_setpoint_set->yaw = mavlink_msg_local_position_setpoint_set_get_yaw(msg); }