diff --git a/localization/qgc.ts b/localization/qgc.ts index b779377fc057a613ad262072b6a5ea4c83c88cae..25c9ba8c5fbb3fcee148585719d86be5bc899db1 100644 --- a/localization/qgc.ts +++ b/localization/qgc.ts @@ -41,12 +41,12 @@ APMAirframeComponentController - + Param file github json download failed: %1 - + Param file download failed: %1 @@ -902,58 +902,52 @@ APMSafetyComponentSub - + Failsafe Actions - - - Ground Station failsafe: - - - Leak failsafe: + GCS Heartbeat: - - GeoFence + + Leak: - - Depth GeoFence enabled -(report only) + + Battery: - - Max depth: + + EKF: - - Leak Detector + + Pilot Input: - - Pin: + + Internal Temperature: - - Logic (when dry): + + Internal Pressure: - + Arming Checks - + Warning: Turning off arming checks can lead to loss of Vehicle control. @@ -1128,64 +1122,53 @@ APMSafetyComponentSummarySub - + Arming Checks: - + Enabled - + Some disabled - + GCS failsafe: - + Leak failsafe: - - - Leak detector: - - - - - - GeoFence: - - - Disabled + Battery failsafe: - - Depth + + EKF failsafe: - - Circle + + Pilot Input failsafe: - - Depth,Circle + + Int. Temperature failsafe: - - Report only + + Int. Pressure failsafe: @@ -1498,6 +1481,17 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t (or vice-versa). The flight controller will need to be rebooted to apply changes. + + + + Load Vehicle Default Parameters + + + + + Select your vehicle to load the default parameters: + + APMSubFrameComponentSummary @@ -1816,7 +1810,12 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t ArduCopterFirmwarePlugin - + + Unable to takeoff: Vehicle failed to change to Guided mode. + + + + Unable to takeoff: Vehicle failed to arm. @@ -2014,30 +2013,40 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + Distance Interval - + Hardware Settings - + AUX Pin Assignment - + Trigger Pin Polarity - + Trigger Period + + + Camera Test + + + + + Trigger Camera + + Camera @@ -2689,36 +2698,31 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t FirmwarePlugin - Typhoon H CGO3+ - - - - Sony ILCE-QX1 - + Canon S100 PowerShot - + Canon G9 X PowerShot - + Canon SX260 HS PowerShot - + Canon EOS-M 22mm - + Sony a6000 16mm @@ -2736,131 +2740,131 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + Upgrade cancelled - + Found device - - + + PX4 Flight Stack - - + + Standard Version (stable) - + Beta Testing (beta) - + Developer Build (master) - - - + + + Custom firmware file... - + Standard Version - + Detected PX4 Flow board. You can select from the following firmware: - + Detected Pixhawk board. You can select from the following flight stacks: - + Press Ok to upgrade your vehicle. - + ArduPilot Flight Stack - + Advanced settings - + Select which version of the firmware you would like to install: - + Select which version of the above flight stack you would like to install: - + WARNING: BETA FIRMWARE. - + This firmware version is ONLY intended for beta testers. - + Although it has received FLIGHT TESTING, it represents actively changed code. - + Do NOT use for normal operation. - + WARNING: CONTINUOUS BUILD FIRMWARE. - + This firmware has NOT BEEN FLIGHT TESTED. - + It is only intended for DEVELOPERS. - + Run bench tests without props first. - + Do NOT fly this without additional safety precautions. - + Follow the mailing list actively when using it. @@ -2900,31 +2904,36 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - Flight complete + Flight Plan complete + + + + + %1 Images Taken - - Do you want to remove the mission from the vehicle? + + Remove plan from vehicle - + Single - + Multi-Vehicle (WIP) - + Fly - + Action @@ -2947,7 +2956,7 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t FlightDisplayViewVideo - + WAITING FOR VIDEO @@ -3126,16 +3135,6 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t Miscellaneous - - - Font size: - - - - - Color scheme: - - Map Provider: @@ -3186,24 +3185,34 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t Virtual Joystick + + + Font Size: + + + + + Color Scheme: + + - Default mission altitude: + Default Mission Altitude: - AutoLoad missions + AutoLoad Missions - File save path: + File Save Path: - + <not set> @@ -3268,12 +3277,12 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + Video Source: - + UDP Port: @@ -3283,22 +3292,37 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + Aspect Ratio: - + Grid Lines: - - Save path: + + Video Recording - + + Max Storage Usage: + + + + + Video File Format: + + + + + Save Path: + + + + %1 Version: %2 @@ -3674,7 +3698,12 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + + _activeVehicle(%1) _vehicleArmed(%2) guidedModeSupported(%3) _vehicleFlying(%4) _vehicleInRTLMode(%5) pauseVehicleSupported(%6) _vehiclePaused(%7) _flightMode(%8) + + + + Internal error: unknown actionCode @@ -3682,7 +3711,7 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t GuidedAltitudeSlider - + New Alt(rel) @@ -3896,111 +3925,111 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + LOG - - + + Set logarithmic scale for Y axis - - + + Sliding window size to calculate mean and variance - - + + Start to log curve data into a CSV or TXT file - + Start Logging - + Ground Time - - + + Overwrite timestamp of data from vehicle with ground receive time. Helps if the plots are not visible because of missing or invalid onboard time. - + No curves selected for logging. - + Please check all curves you want to log. Currently no data would be logged. Aborting the logging. - + Save Log File - + Log Files (*.log) - + Stop logging - + Starting Log Compression - + Should empty fields (e.g. due to packet drops) be filled with the previous value of the same variable (zero order hold)? - + Start logging - - + + Enable the curve in the graph window - - + + Current value of %1 in %2 units - - + + Unit of - - + + Arithmetic mean of %1 in %2 units - - + + Variance of %1 in (%2)^2 units @@ -4244,7 +4273,7 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t LogReplayLink - + Connect not allowed during Flight Data replay. @@ -4275,29 +4304,29 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t MAVLinkProtocol - - - + + + MAVLink Protocol - + There is a MAVLink Version or Baud Rate Mismatch. Please check if the baud rates of %1 and your autopilot are the same. - + MAVLink Logging failed. Could not write to file %1, logging disabled. - + MAVLink protocol - + Opening Flight Data file for writing failed. Unable to write to %1. Please choose a different file location. @@ -4676,29 +4705,29 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - + Mission item %1 is not an object - + Unsupported complex item type: %1 - + Unknown item type: %1 - + Could not find doJumpId: %1 - - - + + + Mission: %1 @@ -4788,89 +4817,71 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t MissionSettingsEditor - + Firmware - + Vehicle - + Mission Defaults - + Waypoint alt - + Flight speed - + RTL after mission end - + Vehicle Info - + Cruise speed - + Hover speed - + Planned Home Position - + Altitude - + Actual position set by vehicle at flight time. - + Set Home To Map Center - - MixersComponent - - - Lot of Qml code goes here... - - - - - Mixers - - - - - Mixers tuning is used to blah, blah, blah... [WIP] - - - MockLink @@ -4905,7 +4916,7 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t - Stop All MockLinks + Stop One MockLink @@ -5026,7 +5037,7 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t MultiVehicleManager - + Connected to Vehicle %1 @@ -5034,292 +5045,256 @@ propellers on the green thrusters and counter-clockwise propellers on the blue t OfflineMap - + Error Message - + Max Cache Disk Size (MB): - + Max Cache Memory Size (MB): - + Memory cache changes require a restart to take effect. - - MapBox Access Token + + Esri Access Token - - With an access token, you can use MapBox Maps. + + Mapbox Access Token - - Esri Access Token + + To enable Mapbox maps, enter your access token. - - With an access token, you can use Esri Maps. + + To enable Esri maps, enter your access token. - + This will delete all tiles INCLUDING the tile sets you have created yourself. Is this really what you want? - + Delete %1 and all its tiles. Is this really what you want? - + System Wide Tile Cache - + Zoom Levels: - + Total: - + Unique: - + Downloaded: - + Error Count: - + Size: - - + + Tile Count: - + Resume Download - + Cancel Download - + Delete - + Confirm Delete - - - - - + + + Close - + Min Zoom: %1 - + Max Zoom: %1 - + Add New Set - + Name: - + Map type: - + Min/Max Zoom Levels - + Est Size: - + Too many tiles - + Download - - - + + + Cancel - + Add new set - + + Import - + + Export - + Options - + Offline Maps Options - + Select Tile Sets to Export - + Select All - + Select None - - Export to Disk - - - - - Export to Device - - - - + Tile Set Export Progress - + Tile Set Export Completed - + Map Tile Set Import - + Map Tile Set Import Progress - + Map Tile Set Import Completed - + Append to existing set - + Replace existing set - - - Import From Disk - - - - - Import From Device - - - - - Map Tile Set Import From Device - - - - - - NOT YET IMPLEMENTED - - - - - Map Tile Set Export To Device - - PX4AdvancedFlightModes @@ -5663,7 +5638,7 @@ Is this really what you want? - + Unable to start mission: Vehicle failed to arm. @@ -6114,27 +6089,27 @@ Is this really what you want? ParameterManager - + Parameter write failed: veh:%1 comp:%2 param:%3 - + Parameter read failed: veh:%1 comp:%2 param:%3 - + %1 was unable to retrieve the full set of parameters from vehicle %2. This will cause %1 to be unable to display its full user interface. If you are using modified firmware, you may need to resolve any vehicle startup errors to resolve the issue. If you are using standard firmware, you may need to upgrade to a newer version to resolve the issue. - + Vehicle %1 did not respond to request for parameters. This will cause %2 to be unable to display its full user interface. - + %1 key is not a json object @@ -6142,28 +6117,28 @@ Is this really what you want? PlanMasterController - + Error reading Plan file (%1). %2 - + Plan save error %1 : %2 - + Supported types (*.%1 *.%2 *.%3 *.%4) - - + + All Files (*.*) - + Plan Files (*.%1) @@ -6171,73 +6146,73 @@ Is this really what you want? PlanToolBar - + Selected Waypoint - + Alt diff: - + Azimuth: - - + + Distance: - + Gradient: - + Heading: - + Total Mission - + Max telem dist: - + Time: - + Battery - + Batteries required: - + Swap waypoint: - + Upload Required - + Upload @@ -6245,152 +6220,152 @@ Is this really what you want? PlanView - + Vehicle is currently armed. Do you want to upload the mission to the vehicle? - + Apply new alititude - + You have changed the default altitude for mission items. Would you like to apply that altitude to all the items in the current mission? - + Your vehicle is currently flying a mission. In order to upload a new or modified mission the current mission will be paused. - + After the mission is uploaded you can adjust the current waypoint and start the mission. - + Pause and Upload - + Plan Upload - + Select Plan File - + Save Plan - + Move the selected mission item to the be after following mission item: - + Plan - + Mission - + Fence - + Rally - + You have unsaved/unsent changes. Loading from the Vehicle will lose these changes. Are you sure you want to load from the Vehicle? - + You have unsaved/unsent changes. Loading from a file will lose these changes. Are you sure you want to load from a file? - + Are you sure you want to remove all items? - + This will also remove all items from the vehicle. - + Create complex pattern: - + Mission overwrite - + GeoFence overwrite - + Rally Points overwrite - + You have unsaved changes. You should upload to your vehicle, or save to a file: - + Sync: - + Upload - + Download - + Save To File... - + Load From File... - + Remove All - + Remove all @@ -6669,23 +6644,27 @@ sudo apt-get remove modemmanager - - + Telemetry save error - + Unable to save telemetry log. Error copying telemetry to '%1': '%2'. - + + Telemetry Save Error + + + + Unable to save telemetry log. Application save directory is not set. - + Unable to save telemetry log. Telemetry save directory "%1" does not exist. @@ -6728,7 +6707,7 @@ sudo apt-get remove modemmanager - + WARNING: You are about to enter Advanced Mode. If used incorrectly, this may cause your vehicle to malfunction thus voiding your warranty. You should do so only if instructed by customer support. Are you sure you want to enable Advanced Mode? @@ -7657,47 +7636,42 @@ Do you want to replace it? - - Coordinate is invalid: %1 - - - - + Incorrect value type - key:type:expected %1:%2:%3 - + enum strings/values count mismatch strings:values %1:%2 - + Incorrect file type key expected:%1 actual:%2 - + Incorrect type for version value, must be integer - + File version %1 is no longer supported - + File version %1 is newer than current supported version %2 - + value for coordinate array is not array - + Unknown type: %1 @@ -8019,119 +7993,119 @@ Do you want to replace it? SafetyComponent - + Low Battery Failsafe Trigger - - - + + + Failsafe Action: - + Battery Warn Level: - + Battery Failsafe Level: - + RC Loss Failsafe Trigger - + RC Loss Timeout: - + Data Link Loss Failsafe Trigger - + Data Link Loss Timeout: - + Geofence Failsafe Trigger - + Action on breach: - + Max radius: - + Max altitude: - + Return Home Settings - + Climb to altitude of: - + Return home, then: - + Land immediately - + Loiter and do not land - + Loiter and land after specified time - + Loiter Time - + Loiter Altitude - + Land Mode Settings - + Landing Descent Rate: - + Disarm After: @@ -8517,19 +8491,64 @@ Do you want to replace it? SetupView - This operation cannot be performed while vehicle is armed. + This operation cannot be performed while the vehicle is armed. - - Connect vehicle to your device and %1 will automatically detect it. + + missing message panel text - + + %1 does not currently support setup of your vehicle type. + + + + + Vehicle settings and info will display after connecting your vehicle. + + + + + You are currently connected to a vehicle but it did not return the full parameter list. + + + + + As a result, the full set of vehicle setup options are not available. + + + + Vehicle Setup + + + Summary + + + + + Firmware + + + + + PX4Flow + + + + + Joystick + + + + + Parameters + + SimpleItemEditor @@ -8606,12 +8625,12 @@ Do you want to replace it? - Frontal + Front Lap - Side + Side Lap @@ -8621,81 +8640,87 @@ Do you want to replace it? - + Grid - + Angle - - + + Turnaround dist - - + + + Entry + + + + + Refly at 90 degree offset - + Select one: - - + + Altitude - + Ground res - + Spacing - + Relative altitude - + Statistics - + Survey area - + Photo count - + Photo interval - + N/A - + secs @@ -8703,17 +8728,17 @@ Do you want to replace it? SurveyMissionItem - + %1 does not support this version of survey items - + %1 does not support loading this complex mission item type: %2:%3 - + %1 but %2 object is missing @@ -9053,199 +9078,199 @@ Do you want to replace it? Vehicle - + MAVLink Generic - + Fixed Wing - + Multi-Rotor - + VTOL - + Rover - + Sub - + Unknown - + %1 command temporarily rejected - + %1 command denied - + %1 command not supported - + %1 command failed - + AutoLoad%1.%2 - + Generic micro air vehicle - + Fixed wing aircraft - + Quadrotor - + Coaxial helicopter - + Normal helicopter with tail rotor. - + Ground installation - + Operator control unit / ground control station - + Airship, controlled - + Free balloon, uncontrolled - + Rocket - + Ground rover - + Surface vessel, boat, ship - + Submarine - + Hexarotor - - + + Octorotor - - + + Flapping wing - + Onboard companion controller - + Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter - + Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter - + Tiltrotor VTOL - + VTOL reserved 2 - + VTOL reserved 3 - + VTOL reserved 4 - + VTOL reserved 5 - + Onboard gimbal - + Onboard ADSB peripheral - + Vehicle did not respond to command: %1 @@ -9323,6 +9348,19 @@ Do you want to replace it? + + VideoReceiver + + + Unabled to record video. Video save path must be specified in Settings. + + + + + Invalid video format defined. + + + ViewWidget