Reference counting for LinkInterface, LinkConfiguration

Prevent shutdown ordering crashes

qgroundcontrol.pro

@@ -641,6 +641,7 @@ SOURCES += \
     src/VehicleSetup/JoystickConfigController.cc \
     src/audio/QGCAudioWorker.cpp \
     src/comm/LinkConfiguration.cc \
+    src/comm/LinkInterface.cc \
     src/comm/LinkManager.cc \
     src/comm/MAVLinkProtocol.cc \
     src/comm/QGCMAVLink.cc \

src/QmlControls/QGroundControlQmlGlobal.cc

@@ -155,8 +155,8 @@ void QGroundControlQmlGlobal::stopAllMockLinks(void)
 #ifdef QT_DEBUG
     LinkManager* linkManager = qgcApp()->toolbox()->linkManager();
 
-    for (int i=0; i<linkManager->links()->count(); i++) {
-        LinkInterface* link = linkManager->links()->value<LinkInterface*>(i);
+    for (int i=0; i<linkManager->links().count(); i++) {
+        LinkInterface* link = linkManager->links()[i];
         MockLink* mockLink = qobject_cast<MockLink*>(link);
 
         if (mockLink) {

src/Vehicle/MultiVehicleManager.cc

@@ -306,9 +306,9 @@ void MultiVehicleManager::setGcsHeartbeatEnabled(bool gcsHeartBeatEnabled)
 void MultiVehicleManager::_sendGCSHeartbeat(void)
 {
     // Send a heartbeat out on each link
-    QmlObjectListModel* links = _toolbox->linkManager()->links();
-    for (int i=0; i<links->count(); i++) {
-        LinkInterface* link = links->value<LinkInterface*>(i);
+    LinkManager* linkMgr = _toolbox->linkManager();
+    for (int i=0; i<linkMgr->links().count(); i++) {
+        LinkInterface* link = linkMgr->links()[i];
         if (link->isConnected()) {
             mavlink_message_t message;
             mavlink_msg_heartbeat_pack_chan(_mavlinkProtocol->getSystemId(),

src/Vehicle/Vehicle.cc

@@ -926,8 +926,9 @@ bool Vehicle::_containsLink(LinkInterface* link)
 void Vehicle::_addLink(LinkInterface* link)
 {
     if (!_containsLink(link)) {
-        _links += link;
         qCDebug(VehicleLog) << "_addLink:" << QString("%1").arg((ulong)link, 0, 16);
+        _links += link;
+        _updatePriorityLink();
         connect(qgcApp()->toolbox()->linkManager(), &LinkManager::linkInactive, this, &Vehicle::_linkInactiveOrDeleted);
         connect(qgcApp()->toolbox()->linkManager(), &LinkManager::linkDeleted, this, &Vehicle::_linkInactiveOrDeleted);
     }
@@ -938,6 +939,7 @@ void Vehicle::_linkInactiveOrDeleted(LinkInterface* link)
     qCDebug(VehicleLog) << "_linkInactiveOrDeleted linkCount" << _links.count();
 
     _links.removeOne(link);
+    _updatePriorityLink();
 
     if (_links.count() == 0 && !_allLinksInactiveSent) {
         qCDebug(VehicleLog) << "All links inactive";
@@ -983,26 +985,42 @@ void Vehicle::_sendMessageOnLink(LinkInterface* link, mavlink_message_t message)
     emit messagesSentChanged();
 }
 
-/// @return Direct usb connection link to board if one, NULL if none
-LinkInterface* Vehicle::priorityLink(void)
+void Vehicle::_updatePriorityLink(void)
 {
 #ifndef NO_SERIAL_LINK
-    foreach (LinkInterface* link, _links) {
+    LinkInterface* newPriorityLink = NULL;
+
+    // Note that this routine specificallty does not clear _priorityLink when there are no links remaining.
+    // By doing this we hold a reference on the last link as the Vehicle shuts down. Thus preventing shutdown
+    // ordering NULL pointer crashes where priorityLink() is still called during shutdown sequence.
+    for (int i=0; i<_links.count(); i++) {
+        LinkInterface* link = _links[i];
         if (link->isConnected()) {
             SerialLink* pSerialLink = qobject_cast<SerialLink*>(link);
             if (pSerialLink) {
-                LinkConfiguration* pLinkConfig = pSerialLink->getLinkConfiguration();
-                if (pLinkConfig) {
-                    SerialConfiguration* pSerialConfig = qobject_cast<SerialConfiguration*>(pLinkConfig);
+                LinkConfiguration* config = pSerialLink->getLinkConfiguration();
+                if (config) {
+                    SerialConfiguration* pSerialConfig = qobject_cast<SerialConfiguration*>(config);
                     if (pSerialConfig && pSerialConfig->usbDirect()) {
-                        return link;
+                        if (_priorityLink.data() != link) {
+                            newPriorityLink = link;
+                            break;
+                        }
+                        return;
                     }
                 }
             }
         }
     }
+
+    if (!newPriorityLink && !_priorityLink.data() && _links.count()) {
+        newPriorityLink = _links[0];
+    }
+
+    if (newPriorityLink) {
+        _priorityLink = qgcApp()->toolbox()->linkManager()->sharedLinkInterfacePointerForLink(newPriorityLink);
+    }
 #endif
-    return _links.count() ? _links[0] : NULL;
 }
 
 void Vehicle::setLatitude(double latitude)

src/Vehicle/Vehicle.h

@@ -416,8 +416,9 @@ public:
     MAV_TYPE vehicleType(void) const { return _vehicleType; }
     Q_INVOKABLE QString vehicleTypeName(void) const;
 
-    /// Returns the highest quality link available to the Vehicle
-    LinkInterface* priorityLink(void);
+    /// Returns the highest quality link available to the Vehicle. If you need to hold a refernce to this link use
+    /// LinkManager::sharedLinkInterfaceForGet to get QSharedPointer for link.
+    LinkInterface* priorityLink(void) { return _priorityLink.data(); }
 
     /// Sends a message to the specified link
     /// @return true: message sent, false: Link no longer connected
@@ -720,6 +721,7 @@ private:
     void _handleMavlinkLoggingDataAcked(mavlink_message_t& message);
     void _ackMavlinkLogData(uint16_t sequence);
     void _sendNextQueuedMavCommand(void);
+    void _updatePriorityLink(void);
 
 private:
     int     _id;                    ///< Mavlink system id
@@ -851,6 +853,8 @@ private:
     static const int    _lowBatteryAnnounceRepeatMSecs; // Amount of time in between each low battery announcement
     QElapsedTimer       _lowBatteryAnnounceTimer;
 
+    SharedLinkInterfacePointer _priorityLink;  // We always keep a reference to the priority link to manage shutdown ordering
+
     // FactGroup facts
 
     Fact _rollFact;

src/comm/LinkConfiguration.h

@@ -7,7 +7,6 @@
  *
  ****************************************************************************/
 
-
 #ifndef LINKCONFIGURATION_H
 #define LINKCONFIGURATION_H
 
@@ -37,7 +36,7 @@ public:
 
     // Property accessors
 
-    const QString   name(void)  { return _name; }
+    QString         name(void) const { return _name; }
     LinkInterface*  link(void)  { return _link; }
 
     void            setName(const QString name);
@@ -190,4 +189,6 @@ private:
     bool    _autoConnect;   ///< This connection is started automatically at boot
 };
 
+typedef QSharedPointer<LinkConfiguration> SharedLinkConfigurationPointer;
+
 #endif // LINKCONFIGURATION_H

src/comm/LinkInterface.cc

+/****************************************************************************
+ *
+ *   (c) 2009-2016 QGROUNDCONTROL PROJECT <http://www.qgroundcontrol.org>
+ *
+ * QGroundControl is licensed according to the terms in the file
+ * COPYING.md in the root of the source code directory.
+ *
+ ****************************************************************************/
+
+#include "LinkInterface.h"
+#include "QGCApplication.h"
+
+/// mavlink channel to use for this link, as used by mavlink_parse_char. The mavlink channel is only
+/// set into the link when it is added to LinkManager
+uint8_t LinkInterface::mavlinkChannel(void) const
+{
+    if (!_mavlinkChannelSet) {
+        qWarning() << "Call to LinkInterface::mavlinkChannel with _mavlinkChannelSet == false";
+    }
+    return _mavlinkChannel;
+}
+// Links are only created by LinkManager so constructor is not public
+LinkInterface::LinkInterface(SharedLinkConfigurationPointer& config)
+    : QThread(0)
+    , _config(config)
+    , _mavlinkChannelSet(false)
+    , _active(false)
+    , _enableRateCollection(false)
+{
+    _config->setLink(this);
+
+    // Initialize everything for the data rate calculation buffers.
+    _inDataIndex  = 0;
+    _outDataIndex = 0;
+
+    // Initialize our data rate buffers.
+    memset(_inDataWriteAmounts, 0, sizeof(_inDataWriteAmounts));
+    memset(_inDataWriteTimes,   0, sizeof(_inDataWriteTimes));
+    memset(_outDataWriteAmounts,0, sizeof(_outDataWriteAmounts));
+    memset(_outDataWriteTimes,  0, sizeof(_outDataWriteTimes));
+
+    QObject::connect(this, &LinkInterface::_invokeWriteBytes, this, &LinkInterface::_writeBytes);
+    qRegisterMetaType<LinkInterface*>("LinkInterface*");
+}
+
+/// This function logs the send times and amounts of datas for input. Data is used for calculating
+/// the transmission rate.
+///     @param byteCount Number of bytes received
+///     @param time Time in ms send occurred
+void LinkInterface::_logInputDataRate(quint64 byteCount, qint64 time) {
+    if(_enableRateCollection)
+        _logDataRateToBuffer(_inDataWriteAmounts, _inDataWriteTimes, &_inDataIndex, byteCount, time);
+}
+
+/// This function logs the send times and amounts of datas for output. Data is used for calculating
+/// the transmission rate.
+///     @param byteCount Number of bytes sent
+///     @param time Time in ms receive occurred
+void LinkInterface::_logOutputDataRate(quint64 byteCount, qint64 time) {
+    if(_enableRateCollection)
+        _logDataRateToBuffer(_outDataWriteAmounts, _outDataWriteTimes, &_outDataIndex, byteCount, time);
+}
+
+/**
+     * @brief logDataRateToBuffer Stores transmission times/amounts for statistics
+     *
+     * This function logs the send times and amounts of datas to the given circular buffers.
+     * This data is used for calculating the transmission rate.
+     *
+     * @param bytesBuffer[out] The buffer to write the bytes value into.
+     * @param timeBuffer[out] The buffer to write the time value into
+     * @param writeIndex[out] The write index used for this buffer.
+     * @param bytes The amount of bytes transmit.
+     * @param time The time (in ms) this transmission occurred.
+     */
+void LinkInterface::_logDataRateToBuffer(quint64 *bytesBuffer, qint64 *timeBuffer, int *writeIndex, quint64 bytes, qint64 time)
+{
+    QMutexLocker dataRateLocker(&_dataRateMutex);
+
+    int i = *writeIndex;
+
+    // Now write into the buffer, if there's no room, we just overwrite the first data point.
+    bytesBuffer[i] = bytes;
+    timeBuffer[i] = time;
+
+    // Increment and wrap the write index
+    ++i;
+    if (i == _dataRateBufferSize)
+    {
+        i = 0;
+    }
+    *writeIndex = i;
+}
+
+/**
+     * @brief getCurrentDataRate Get the current data rate given a data rate buffer.
+     *
+     * This function attempts to use the times and number of bytes transmit into a current data rate
+     * estimation. Since it needs to use timestamps to get the timeperiods over when the data was sent,
+     * this is effectively a global data rate over the last _dataRateBufferSize - 1 data points. Also note
+     * that data points older than NOW - dataRateCurrentTimespan are ignored.
+     *
+     * @param index The first valid sample in the data rate buffer. Refers to the oldest time sample.
+     * @param dataWriteTimes The time, in ms since epoch, that each data sample took place.
+     * @param dataWriteAmounts The amount of data (in bits) that was transferred.
+     * @return The bits per second of data transferrence of the interface over the last [-statsCurrentTimespan, 0] timespan.
+     */
+qint64 LinkInterface::_getCurrentDataRate(int index, const qint64 dataWriteTimes[], const quint64 dataWriteAmounts[]) const
+{
+    const qint64 now = QDateTime::currentMSecsSinceEpoch();
+
+    // Limit the time we calculate to the recent past
+    const qint64 cutoff = now - _dataRateCurrentTimespan;
+
+    // Grab the mutex for working with the stats variables
+    QMutexLocker dataRateLocker(&_dataRateMutex);
+
+    // Now iterate through the buffer of all received data packets adding up all values
+    // within now and our cutof.
+    qint64 totalBytes = 0;
+    qint64 totalTime = 0;
+    qint64 lastTime = 0;
+    int size = _dataRateBufferSize;
+    while (size-- > 0)
+    {
+        // If this data is within our cutoff time, include it in our calculations.
+        // This also accounts for when the buffer is empty and filled with 0-times.
+        if (dataWriteTimes[index] > cutoff && lastTime > 0) {
+            // Track the total time, using the previous time as our timeperiod.
+            totalTime += dataWriteTimes[index] - lastTime;
+            totalBytes += dataWriteAmounts[index];
+        }
+
+        // Track the last time sample for doing timespan calculations
+        lastTime = dataWriteTimes[index];
+
+        // Increment and wrap the index if necessary.
+        if (++index == _dataRateBufferSize)
+        {
+            index = 0;
+        }
+    }
+
+    // Return the final calculated value in bits / s, converted from bytes/ms.
+    qint64 dataRate = (totalTime != 0)?(qint64)((float)totalBytes * 8.0f / ((float)totalTime / 1000.0f)):0;
+
+    // Finally return our calculated data rate.
+    return dataRate;
+}
+
+/// Sets the mavlink channel to use for this link
+void LinkInterface::_setMavlinkChannel(uint8_t channel)
+{
+    Q_ASSERT(!_mavlinkChannelSet);
+    _mavlinkChannelSet = true;
+    _mavlinkChannel = channel;
+}

src/comm/LinkInterface.h

@@ -19,9 +19,9 @@
 #include <QDebug>
 
 #include "QGCMAVLink.h"
+#include "LinkConfiguration.h"
 
 class LinkManager;
-class LinkConfiguration;
 
 /**
 * The link interface defines the interface for all links used to communicate
@@ -35,18 +35,16 @@ class LinkInterface : public QThread
     // Only LinkManager is allowed to create/delete or _connect/_disconnect a link
     friend class LinkManager;
 
-public:
+public:    
+    ~LinkInterface() { _config->setLink(NULL); }
+
     Q_PROPERTY(bool active      READ active         WRITE setActive         NOTIFY activeChanged)
 
     // Property accessors
-    bool active(void)                       { return _active; }
-    void setActive(bool active)             { _active = active; emit activeChanged(active); }
+    bool active(void)           { return _active; }
+    void setActive(bool active) { _active = active; emit activeChanged(active); }
 
-    /**
-     * @brief Get link configuration
-     * @return A pointer to the instance of LinkConfiguration
-     **/
-    virtual LinkConfiguration* getLinkConfiguration() = 0;
+    LinkConfiguration* getLinkConfiguration(void) { return _config.data(); }
 
     /* Connection management */
 
@@ -116,13 +114,7 @@ public:
     
     /// mavlink channel to use for this link, as used by mavlink_parse_char. The mavlink channel is only
     /// set into the link when it is added to LinkManager
-    uint8_t mavlinkChannel(void) const
-    {
-        if (!_mavlinkChannelSet) {
-            qWarning() << "Call to LinkInterface::mavlinkChannel with _mavlinkChannelSet == false";
-        }
-        return _mavlinkChannel;
-    }
+    uint8_t mavlinkChannel(void) const;
 
     // These are left unimplemented in order to cause linker errors which indicate incorrect usage of
     // connect/disconnect on link directly. All connect/disconnect calls should be made through LinkManager.
@@ -192,43 +184,21 @@ signals:
 
 protected:
     // Links are only created by LinkManager so constructor is not public
-    LinkInterface() :
-        QThread(0)
-        , _mavlinkChannelSet(false)
-        , _active(false)
-        , _enableRateCollection(false)
-    {
-        // Initialize everything for the data rate calculation buffers.
-        _inDataIndex  = 0;
-        _outDataIndex = 0;
-        
-        // Initialize our data rate buffers.
-        memset(_inDataWriteAmounts, 0, sizeof(_inDataWriteAmounts));
-        memset(_inDataWriteTimes,   0, sizeof(_inDataWriteTimes));
-        memset(_outDataWriteAmounts,0, sizeof(_outDataWriteAmounts));
-        memset(_outDataWriteTimes,  0, sizeof(_outDataWriteTimes));
-        
-        QObject::connect(this, &LinkInterface::_invokeWriteBytes, this, &LinkInterface::_writeBytes);
-        qRegisterMetaType<LinkInterface*>("LinkInterface*");
-    }
+    LinkInterface(SharedLinkConfigurationPointer& config);
 
     /// This function logs the send times and amounts of datas for input. Data is used for calculating
     /// the transmission rate.
     ///     @param byteCount Number of bytes received
     ///     @param time Time in ms send occurred
-    void _logInputDataRate(quint64 byteCount, qint64 time) {
-        if(_enableRateCollection)
-            _logDataRateToBuffer(_inDataWriteAmounts, _inDataWriteTimes, &_inDataIndex, byteCount, time);
-    }
+    void _logInputDataRate(quint64 byteCount, qint64 time);
     
     /// This function logs the send times and amounts of datas for output. Data is used for calculating
     /// the transmission rate.
     ///     @param byteCount Number of bytes sent
     ///     @param time Time in ms receive occurred
-    void _logOutputDataRate(quint64 byteCount, qint64 time) {
-        if(_enableRateCollection)
-            _logDataRateToBuffer(_outDataWriteAmounts, _outDataWriteTimes, &_outDataIndex, byteCount, time);
-    }
+    void _logOutputDataRate(quint64 byteCount, qint64 time);
+
+    SharedLinkConfigurationPointer _config;
     
 private:
     /**
@@ -243,24 +213,7 @@ private:
      * @param bytes The amount of bytes transmit.
      * @param time The time (in ms) this transmission occurred.
      */
-    void _logDataRateToBuffer(quint64 *bytesBuffer, qint64 *timeBuffer, int *writeIndex, quint64 bytes, qint64 time)
-    {
-        QMutexLocker dataRateLocker(&_dataRateMutex);
-        
-        int i = *writeIndex;
-
-        // Now write into the buffer, if there's no room, we just overwrite the first data point.
-        bytesBuffer[i] = bytes;
-        timeBuffer[i] = time;
-
-        // Increment and wrap the write index
-        ++i;
-        if (i == _dataRateBufferSize)
-        {
-            i = 0;
-        }
-        *writeIndex = i;
-    }
+    void _logDataRateToBuffer(quint64 *bytesBuffer, qint64 *timeBuffer, int *writeIndex, quint64 bytes, qint64 time);
 
     /**
      * @brief getCurrentDataRate Get the current data rate given a data rate buffer.
@@ -275,48 +228,7 @@ private:
      * @param dataWriteAmounts The amount of data (in bits) that was transferred.
      * @return The bits per second of data transferrence of the interface over the last [-statsCurrentTimespan, 0] timespan.
      */
-    qint64 _getCurrentDataRate(int index, const qint64 dataWriteTimes[], const quint64 dataWriteAmounts[]) const
-    {
-        const qint64 now = QDateTime::currentMSecsSinceEpoch();
-
-        // Limit the time we calculate to the recent past
-        const qint64 cutoff = now - _dataRateCurrentTimespan;
-
-        // Grab the mutex for working with the stats variables
-        QMutexLocker dataRateLocker(&_dataRateMutex);
-
-        // Now iterate through the buffer of all received data packets adding up all values
-        // within now and our cutof.
-        qint64 totalBytes = 0;
-        qint64 totalTime = 0;
-        qint64 lastTime = 0;
-        int size = _dataRateBufferSize;
-        while (size-- > 0)
-        {
-            // If this data is within our cutoff time, include it in our calculations.
-            // This also accounts for when the buffer is empty and filled with 0-times.
-            if (dataWriteTimes[index] > cutoff && lastTime > 0) {
-                // Track the total time, using the previous time as our timeperiod.
-                totalTime += dataWriteTimes[index] - lastTime;
-                totalBytes += dataWriteAmounts[index];
-            }
-
-            // Track the last time sample for doing timespan calculations
-            lastTime = dataWriteTimes[index];
-
-            // Increment and wrap the index if necessary.
-            if (++index == _dataRateBufferSize)
-            {
-                index = 0;
-            }
-        }
-
-        // Return the final calculated value in bits / s, converted from bytes/ms.
-        qint64 dataRate = (totalTime != 0)?(qint64)((float)totalBytes * 8.0f / ((float)totalTime / 1000.0f)):0;
-
-        // Finally return our calculated data rate.
-        return dataRate;
-    }
+    qint64 _getCurrentDataRate(int index, const qint64 dataWriteTimes[], const quint64 dataWriteAmounts[]) const;
 
     /**
      * @brief Connect this interface logically
@@ -328,7 +240,7 @@ private:
     virtual void _disconnect(void) = 0;
     
     /// Sets the mavlink channel to use for this link
-    void _setMavlinkChannel(uint8_t channel) { Q_ASSERT(!_mavlinkChannelSet); _mavlinkChannelSet = true; _mavlinkChannel = channel; }
+    void _setMavlinkChannel(uint8_t channel);
     
     bool _mavlinkChannelSet;    ///< true: _mavlinkChannel has been set
     uint8_t _mavlinkChannel;    ///< mavlink channel to use for this link, as used by mavlink_parse_char
@@ -355,6 +267,6 @@ private:
     bool _enableRateCollection;
 };
 
-typedef QSharedPointer<LinkInterface> SharedLinkInterface;
+typedef QSharedPointer<LinkInterface> SharedLinkInterfacePointer;
 
 #endif // _LINKINTERFACE_H_

src/comm/LinkManager.h

@@ -67,19 +67,12 @@ public:
     Q_PROPERTY(bool autoconnectPX4Flow                  READ autoconnectPX4Flow                 WRITE setAutoconnectPX4Flow     NOTIFY autoconnectPX4FlowChanged)
     Q_PROPERTY(bool autoconnectRTKGPS                   READ autoconnectRTKGPS                  WRITE setAutoconnectRTKGPS      NOTIFY autoconnectRTKGPSChanged)
     Q_PROPERTY(bool autoconnectLibrePilot               READ autoconnectLibrePilot              WRITE setAutoconnectLibrePilot  NOTIFY autoconnectLibrePilotChanged)
-    Q_PROPERTY(bool isBluetoothAvailable                READ isBluetoothAvailable               CONSTANT)
-
-    /// LinkInterface Accessor
-    Q_PROPERTY(QmlObjectListModel*  links               READ links                              CONSTANT)
-    /// LinkConfiguration Accessor
-    Q_PROPERTY(QmlObjectListModel*  linkConfigurations  READ linkConfigurations                                                 NOTIFY linkConfigurationsChanged)
-    /// List of comm type strings
-    Q_PROPERTY(QStringList          linkTypeStrings     READ linkTypeStrings                    CONSTANT)
-    /// List of supported baud rates for serial links
-    Q_PROPERTY(QStringList          serialBaudRates     READ serialBaudRates                    CONSTANT)
-    /// List of comm ports display names
+    Q_PROPERTY(bool isBluetoothAvailable                READ isBluetoothAvailable                                               CONSTANT)
+
+    Q_PROPERTY(QmlObjectListModel*  linkConfigurations  READ _qmlLinkConfigurations                                             NOTIFY linkConfigurationsChanged)
+    Q_PROPERTY(QStringList          linkTypeStrings     READ linkTypeStrings                                                    CONSTANT)
+    Q_PROPERTY(QStringList          serialBaudRates     READ serialBaudRates                                                    CONSTANT)
     Q_PROPERTY(QStringList          serialPortStrings   READ serialPortStrings                                                  NOTIFY commPortStringsChanged)
-    /// List of comm ports
     Q_PROPERTY(QStringList          serialPorts         READ serialPorts                                                        NOTIFY commPortsChanged)
 
     // Create/Edit Link Configuration
@@ -100,12 +93,11 @@ public:
     bool autoconnectLibrePilot      (void)  { return _autoconnectLibrePilot; }
     bool isBluetoothAvailable       (void);
 
-    QmlObjectListModel* links               (void) { return &_links; }
-    QmlObjectListModel* linkConfigurations  (void) { return &_linkConfigurations; }
-    QStringList         linkTypeStrings     (void) const;
-    QStringList         serialBaudRates     (void);
-    QStringList         serialPortStrings   (void);
-    QStringList         serialPorts         (void);
+    QList<LinkInterface*> links                 (void);
+    QStringList         linkTypeStrings         (void) const;
+    QStringList         serialBaudRates         (void);
+    QStringList         serialPortStrings       (void);
+    QStringList         serialPorts             (void);
 
     void setAutoconnectUDP        (bool autoconnect);
     void setAutoconnectPixhawk    (bool autoconnect);
@@ -132,7 +124,7 @@ public:
 
     /// Creates, connects (and adds) a link  based on the given configuration instance.
     /// Link takes ownership of config.
-    Q_INVOKABLE LinkInterface* createConnectedLink(LinkConfiguration* config);
+    Q_INVOKABLE LinkInterface* createConnectedLink(SharedLinkConfigurationPointer& config);
 
     /// Creates, connects (and adds) a link  based on the given configuration name.
     LinkInterface* createConnectedLink(const QString& name);
@@ -165,6 +157,17 @@ public:
     // Override from QGCTool
     virtual void setToolbox(QGCToolbox *toolbox);
 
+    /// @return This mavlink channel is never assigned to a vehicle.
+    uint8_t reservedMavlinkChannel(void) { return 0; }
+
+    /// If you are going to hold a reference to a LinkInterface* in your object you must reference count it
+    /// by using this method to get access to the shared pointer.
+    SharedLinkInterfacePointer sharedLinkInterfacePointerForLink(LinkInterface* link);
+
+    bool containsLink(LinkInterface* link);
+
+    SharedLinkConfigurationPointer addConfiguration(LinkConfiguration* config);
+
 signals:
     void autoconnectUDPChanged        (bool autoconnect);
     void autoconnectPixhawkChanged    (bool autoconnect);
@@ -204,11 +207,13 @@ private slots:
 #endif
 
 private:
+    QmlObjectListModel* _qmlLinkConfigurations  (void) { return &_qmlConfigurations; }
     bool _connectionsSuspendedMsg(void);
     void _updateAutoConnectLinks(void);
     void _updateSerialPorts();
     void _fixUnnamed(LinkConfiguration* config);
     bool _setAutoconnectWorker(bool& currentAutoconnect, bool newAutoconnect, const char* autoconnectKey);
+    void _removeConfiguration(LinkConfiguration* config);
 
 #ifndef NO_SERIAL_LINK
     SerialConfiguration* _autoconnectConfigurationsContainsPort(const QString& portName);
@@ -223,9 +228,11 @@ private:
 
     MAVLinkProtocol*    _mavlinkProtocol;
 
-    QmlObjectListModel  _links;
-    QmlObjectListModel  _linkConfigurations;
-    QmlObjectListModel  _autoconnectConfigurations;
+
+    QList<SharedLinkInterfacePointer>       _sharedLinks;
+    QList<SharedLinkConfigurationPointer>   _sharedConfigurations;
+    QList<SharedLinkConfigurationPointer>   _sharedAutoconnectConfigurations;
+    QmlObjectListModel                      _qmlConfigurations;
 
     QMap<QString, int>  _autoconnectWaitList;   ///< key: QGCSerialPortInfo.systemLocation, value: wait count
     QStringList _commPortList;

src/comm/LogReplayLink.cc

@@ -64,12 +64,13 @@ QString LogReplayLinkConfiguration::logFilenameShort(void)
     return fi.fileName();
 }
 
-LogReplayLink::LogReplayLink(LogReplayLinkConfiguration* config) :
-    _connected(false),
-    _replayAccelerationFactor(1.0f)
+LogReplayLink::LogReplayLink(SharedLinkConfigurationPointer& config)
+    : LinkInterface(config)
+    , _logReplayConfig(qobject_cast<LogReplayLinkConfiguration*>(config.data()))
+    , _connected(false)
+    , _replayAccelerationFactor(1.0f)
 {
-    Q_ASSERT(config);
-    _config = config;
+    Q_ASSERT(_logReplayConfig);
     
     _readTickTimer.moveToThread(this);
     
@@ -184,7 +185,7 @@ quint64 LogReplayLink::_seekToNextMavlinkMessage(mavlink_message_t* nextMsg)
 bool LogReplayLink::_loadLogFile(void)
 {
     QString errorMsg;
-    QString logFilename = _config->logFilename();
+    QString logFilename = _logReplayConfig->logFilename();
     QFileInfo logFileInfo;
     int logDurationSecondsTotal;
     

src/comm/LogReplayLink.h

@@ -57,8 +57,6 @@ class LogReplayLink : public LinkInterface
     friend class LinkManager;
 
 public:
-    virtual LinkConfiguration* getLinkConfiguration() { return _config; }
-
     /// @return true: log is currently playing, false: log playback is paused
     bool isPlaying(void) { return _readTickTimer.isActive(); }
 
@@ -111,7 +109,7 @@ private slots:
 
 private:
     // Links are only created/destroyed by LinkManager so constructor/destructor is not public
-    LogReplayLink(LogReplayLinkConfiguration* config);
+    LogReplayLink(SharedLinkConfigurationPointer& config);
     ~LogReplayLink();
 
     void _replayError(const QString& errorMsg);
@@ -129,7 +127,7 @@ private:
     // Virtuals from QThread
     virtual void run(void);
 
-    LogReplayLinkConfiguration* _config;
+    LogReplayLinkConfiguration* _logReplayConfig;
 
     bool    _connected;
     QTimer _readTickTimer;      ///< Timer which signals a read of next log record

src/comm/MAVLinkProtocol.cc

@@ -159,7 +159,7 @@ void MAVLinkProtocol::receiveBytes(LinkInterface* link, QByteArray b)
     // Since receiveBytes signals cross threads we can end up with signals in the queue
     // that come through after the link is disconnected. For these we just drop the data
     // since the link is closed.
-    if (!_linkMgr->links()->contains(link)) {
+    if (!_linkMgr->containsLink(link)) {
         return;
     }
 

src/comm/MockLink.cc

@@ -44,8 +44,9 @@ const char* MockConfiguration::_vehicleTypeKey =    "VehicleType";
 const char* MockConfiguration::_sendStatusTextKey = "SendStatusText";
 const char* MockConfiguration::_failureModeKey =    "FailureMode";
 
-MockLink::MockLink(MockConfiguration* config)
-    : _missionItemHandler(this, qgcApp()->toolbox()->mavlinkProtocol())
+MockLink::MockLink(SharedLinkConfigurationPointer& config)
+    : LinkInterface(config)
+    , _missionItemHandler(this, qgcApp()->toolbox()->mavlinkProtocol())
     , _name("MockLink")
     , _connected(false)
     , _vehicleSystemId(_nextVehicleSystemId++)
@@ -67,14 +68,11 @@ MockLink::MockLink(MockConfiguration* config)
     , _logDownloadCurrentOffset(0)
     , _logDownloadBytesRemaining(0)
 {
-    _config = config;
-    if (_config) {
-        _firmwareType = config->firmwareType();
-        _vehicleType = config->vehicleType();
-        _sendStatusText = config->sendStatusText();
-        _failureMode = config->failureMode();
-        _config->setLink(this);
-    }
+    MockConfiguration* mockConfig = qobject_cast<MockConfiguration*>(_config.data());
+    _firmwareType = mockConfig->firmwareType();
+    _vehicleType = mockConfig->vehicleType();
+    _sendStatusText = mockConfig->sendStatusText();
+    _failureMode = mockConfig->failureMode();
 
     union px4_custom_mode   px4_cm;
 
@@ -1041,12 +1039,12 @@ void MockConfiguration::updateSettings()
 
 MockLink*  MockLink::_startMockLink(MockConfiguration* mockConfig)
 {
-    LinkManager* linkManager = qgcApp()->toolbox()->linkManager();
+    LinkManager* linkMgr = qgcApp()->toolbox()->linkManager();
 
     mockConfig->setDynamic(true);
-    linkManager->linkConfigurations()->append(mockConfig);
+    SharedLinkConfigurationPointer config = linkMgr->addConfiguration(mockConfig);
 
-    return qobject_cast<MockLink*>(linkManager->createConnectedLink(mockConfig));
+    return qobject_cast<MockLink*>(linkMgr->createConnectedLink(config));
 }
 
 MockLink*  MockLink::startPX4MockLink(bool sendStatusText, MockConfiguration::FailureMode_t failureMode)

src/comm/MockLink.h

@@ -90,8 +90,7 @@ class MockLink : public LinkInterface
     Q_OBJECT
 
 public:
-    // LinkConfiguration is optional for MockLink
-    MockLink(MockConfiguration* config = NULL);
+    MockLink(SharedLinkConfigurationPointer& config);
     ~MockLink(void);
 
     // MockLink methods
@@ -126,8 +125,6 @@ public:
     bool connect(void);
     bool disconnect(void);
 
-    LinkConfiguration* getLinkConfiguration() { return _config; }
-
     /// Sets a failure mode for unit testing
     ///     @param failureMode Type of failure to simulate
     void setMissionItemFailureMode(MockLinkMissionItemHandler::FailureMode_t failureMode);
@@ -216,7 +213,6 @@ private:
     uint32_t    _mavCustomMode;
     uint8_t     _mavState;
 
-    MockConfiguration*  _config;
     MAV_AUTOPILOT       _firmwareType;
     MAV_TYPE            _vehicleType;
 

src/comm/SerialLink.cc

@@ -30,19 +30,19 @@ QGC_LOGGING_CATEGORY(SerialLinkLog, "SerialLinkLog")
 
 static QStringList kSupportedBaudRates;
 
-SerialLink::SerialLink(SerialConfiguration* config)
+SerialLink::SerialLink(SharedLinkConfigurationPointer& config)
+    : LinkInterface(config)
+    , _port(NULL)
+    , _bytesRead(0)
+    , _stopp(false)
+    , _reqReset(false)
+    , _serialConfig(qobject_cast<SerialConfiguration*>(config.data()))
 {
-    _bytesRead = 0;
-    _port     = Q_NULLPTR;
-    _stopp    = false;
-    _reqReset = false;
-    Q_ASSERT(config != NULL);
-    _config = config;
-    _config->setLink(this);
-
-    qCDebug(SerialLinkLog) << "Create SerialLink " << config->portName() << config->baud() << config->flowControl()
-             << config->parity() << config->dataBits() << config->stopBits();
-    qCDebug(SerialLinkLog) << "portName: " << config->portName();
+    Q_ASSERT(_serialConfig);
+
+    qCDebug(SerialLinkLog) << "Create SerialLink " << _serialConfig->portName() << _serialConfig->baud() << _serialConfig->flowControl()
+             << _serialConfig->parity() << _serialConfig->dataBits() << _serialConfig->stopBits();
+    qCDebug(SerialLinkLog) << "portName: " << _serialConfig->portName();
 }
 
 void SerialLink::requestReset()
@@ -53,10 +53,10 @@ void SerialLink::requestReset()
 
 SerialLink::~SerialLink()
 {
-    // Disconnect link from configuration
-    _config->setLink(NULL);
     _disconnect();
-    if(_port) delete _port;
+    if (_port) {
+        delete _port;
+    }
     _port = NULL;
 }
 
@@ -70,7 +70,7 @@ bool SerialLink::_isBootloader()
     {
         qCDebug(SerialLinkLog) << "PortName    : " << info.portName() << "Description : " << info.description();
         qCDebug(SerialLinkLog) << "Manufacturer: " << info.manufacturer();
-        if (info.portName().trimmed() == _config->portName() &&
+        if (info.portName().trimmed() == _serialConfig->portName() &&
                 (info.description().toLower().contains("bootloader") ||
                  info.description().toLower().contains("px4 bl") ||
                  info.description().toLower().contains("px4 fmu v1.6"))) {
@@ -159,7 +159,7 @@ bool SerialLink::_hardwareConnect(QSerialPort::SerialPortError& error, QString&
         _port = NULL;
     }
 
-    qCDebug(SerialLinkLog) << "SerialLink: hardwareConnect to " << _config->portName();
+    qCDebug(SerialLinkLog) << "SerialLink: hardwareConnect to " << _serialConfig->portName();
 
     // If we are in the Pixhawk bootloader code wait for it to timeout
     if (_isBootloader()) {
@@ -181,7 +181,7 @@ bool SerialLink::_hardwareConnect(QSerialPort::SerialPortError& error, QString&
         }
     }
 
-    _port = new QSerialPort(_config->portName());
+    _port = new QSerialPort(_serialConfig->portName());
 
     QObject::connect(_port, static_cast<void (QSerialPort::*)(QSerialPort::SerialPortError)>(&QSerialPort::error),
                      this, &SerialLink::linkError);
@@ -219,17 +219,17 @@ bool SerialLink::_hardwareConnect(QSerialPort::SerialPortError& error, QString&
     _port->setDataTerminalReady(true);
 
     qCDebug(SerialLinkLog) << "Configuring port";
-    _port->setBaudRate     (_config->baud());
-    _port->setDataBits     (static_cast<QSerialPort::DataBits>     (_config->dataBits()));
-    _port->setFlowControl  (static_cast<QSerialPort::FlowControl>  (_config->flowControl()));
-    _port->setStopBits     (static_cast<QSerialPort::StopBits>     (_config->stopBits()));
-    _port->setParity       (static_cast<QSerialPort::Parity>       (_config->parity()));
+    _port->setBaudRate     (_serialConfig->baud());
+    _port->setDataBits     (static_cast<QSerialPort::DataBits>     (_serialConfig->dataBits()));
+    _port->setFlowControl  (static_cast<QSerialPort::FlowControl>  (_serialConfig->flowControl()));
+    _port->setStopBits     (static_cast<QSerialPort::StopBits>     (_serialConfig->stopBits()));
+    _port->setParity       (static_cast<QSerialPort::Parity>       (_serialConfig->parity()));
 
     emit communicationUpdate(getName(), "Opened port!");
     emit connected();
 
-    qCDebug(SerialLinkLog) << "Connection SeriaLink: " << "with settings" << _config->portName()
-             << _config->baud() << _config->dataBits() << _config->parity() << _config->stopBits();
+    qCDebug(SerialLinkLog) << "Connection SeriaLink: " << "with settings" << _serialConfig->portName()
+             << _serialConfig->baud() << _serialConfig->dataBits() << _serialConfig->parity() << _serialConfig->stopBits();
 
     return true; // successful connection
 }
@@ -281,7 +281,7 @@ bool SerialLink::isConnected() const
 
 QString SerialLink::getName() const
 {
-    return _config->portName();
+    return _serialConfig->portName();
 }
 
 /**
@@ -294,7 +294,7 @@ qint64 SerialLink::getConnectionSpeed() const
     if (_port) {
         baudRate = _port->baudRate();
     } else {
-        baudRate = _config->baud();
+        baudRate = _serialConfig->baud();
     }
     qint64 dataRate;
     switch (baudRate)
@@ -334,11 +334,11 @@ qint64 SerialLink::getConnectionSpeed() const
 void SerialLink::_resetConfiguration()
 {
     if (_port) {
-        _port->setBaudRate      (_config->baud());
-        _port->setDataBits      (static_cast<QSerialPort::DataBits>    (_config->dataBits()));
-        _port->setFlowControl   (static_cast<QSerialPort::FlowControl> (_config->flowControl()));
-        _port->setStopBits      (static_cast<QSerialPort::StopBits>    (_config->stopBits()));
-        _port->setParity        (static_cast<QSerialPort::Parity>      (_config->parity()));
+        _port->setBaudRate      (_serialConfig->baud());
+        _port->setDataBits      (static_cast<QSerialPort::DataBits>    (_serialConfig->dataBits()));
+        _port->setFlowControl   (static_cast<QSerialPort::FlowControl> (_serialConfig->flowControl()));
+        _port->setStopBits      (static_cast<QSerialPort::StopBits>    (_serialConfig->stopBits()));
+        _port->setParity        (static_cast<QSerialPort::Parity>      (_serialConfig->parity()));
     }
 }
 
@@ -349,11 +349,6 @@ void SerialLink::_emitLinkError(const QString& errorMsg)
     emit communicationError(tr("Link Error"), msg.arg(getName()).arg(errorMsg));
 }
 
-LinkConfiguration* SerialLink::getLinkConfiguration()
-{
-    return _config;
-}
-
 //--------------------------------------------------------------------------
 //-- SerialConfiguration
 

src/comm/SerialLink.h

@@ -133,7 +133,6 @@ class SerialLink : public LinkInterface
 public:
     // LinkInterface
 
-    LinkConfiguration* getLinkConfiguration();
     QString getName() const;
     void    requestReset();
     bool    isConnected() const;
@@ -168,7 +167,7 @@ private slots:
 
 private:
     // Links are only created/destroyed by LinkManager so constructor/destructor is not public
-    SerialLink(SerialConfiguration* config);
+    SerialLink(SharedLinkConfigurationPointer& config);
     ~SerialLink();
 
     // From LinkInterface
@@ -186,7 +185,7 @@ private:
     volatile bool        _reqReset;
     QMutex               _stoppMutex;      // Mutex for accessing _stopp
     QByteArray           _transmitBuffer;  // An internal buffer for receiving data from member functions and actually transmitting them via the serial port.
-    SerialConfiguration* _config;
+    SerialConfiguration* _serialConfig;
 
 signals:
     void aboutToCloseFlag();

src/comm/TCPLink.cc

@@ -24,16 +24,14 @@
 ///
 ///     @author Don Gagne <don@thegagnes.com>
 
-TCPLink::TCPLink(TCPConfiguration *config)
-    : _config(config)
+TCPLink::TCPLink(SharedLinkConfigurationPointer& config)
+    : LinkInterface(config)
+    , _tcpConfig(qobject_cast<TCPConfiguration*>(config.data()))
     , _socket(NULL)
     , _socketIsConnected(false)
 {
-    Q_ASSERT(_config != NULL);
-    // We're doing it wrong - because the Qt folks got the API wrong:
-    // http://blog.qt.digia.com/blog/2010/06/17/youre-doing-it-wrong/
+    Q_ASSERT(_tcpConfig);
     moveToThread(this);
-    //qDebug() << "TCP Created " << _config->name();
 }
 
 TCPLink::~TCPLink()
@@ -69,7 +67,7 @@ void TCPLink::_writeDebugBytes(const QByteArray data)
             ascii.append(219);
         }
     }
-    qDebug() << "Sent" << size << "bytes to" << _config->address().toString() << ":" << _config->port() << "data:";
+    qDebug() << "Sent" << size << "bytes to" << _tcpConfig->address().toString() << ":" << _tcpConfig->port() << "data:";
     qDebug() << bytes;
     qDebug() << "ASCII:" << ascii;
 }
@@ -148,7 +146,7 @@ bool TCPLink::_hardwareConnect()
     _socket = new QTcpSocket();
 
     QSignalSpy errorSpy(_socket, static_cast<void (QTcpSocket::*)(QAbstractSocket::SocketError)>(&QTcpSocket::error));
-    _socket->connectToHost(_config->address(), _config->port());
+    _socket->connectToHost(_tcpConfig->address(), _tcpConfig->port());
     QObject::connect(_socket, &QTcpSocket::readyRead, this, &TCPLink::readBytes);
 
     QObject::connect(_socket,static_cast<void (QTcpSocket::*)(QAbstractSocket::SocketError)>(&QTcpSocket::error),
@@ -189,7 +187,7 @@ bool TCPLink::isConnected() const
 
 QString TCPLink::getName() const
 {
-    return _config->name();
+    return _tcpConfig->name();
 }
 
 qint64 TCPLink::getConnectionSpeed() const

src/comm/TCPLink.h

@@ -121,7 +121,6 @@ class TCPLink : public LinkInterface
 
 public:
     QTcpSocket* getSocket(void) { return _socket; }
-    virtual LinkConfiguration* getLinkConfiguration() { return _config; }
 
     void signalBytesWritten(void);
 
@@ -160,7 +159,7 @@ protected:
 
 private:
     // Links are only created/destroyed by LinkManager so constructor/destructor is not public
-    TCPLink(TCPConfiguration* config);
+    TCPLink(SharedLinkConfigurationPointer& config);
     ~TCPLink();
 
     // From LinkInterface
@@ -174,7 +173,7 @@ private:
     void _writeDebugBytes(const QByteArray data);
 #endif
 
-    TCPConfiguration* _config;
+    TCPConfiguration* _tcpConfig;
     QTcpSocket*       _socket;
     bool              _socketIsConnected;
 

src/comm/UDPLink.cc

@@ -65,27 +65,22 @@ static QString get_ip_address(const QString& address)
     return QString("");
 }
 
-UDPLink::UDPLink(UDPConfiguration* config)
-    : _socket(NULL)
-    , _connectState(false)
-    #if defined(QGC_ZEROCONF_ENABLED)
+UDPLink::UDPLink(SharedLinkConfigurationPointer& config)
+    : LinkInterface(config)
+#if defined(QGC_ZEROCONF_ENABLED)
     , _dnssServiceRef(NULL)
-    #endif
+#endif
     , _running(false)
+    , _socket(NULL)
+    , _udpConfig(qobject_cast<UDPConfiguration*>(config.data()))
+    , _connectState(false)
 {
-    Q_ASSERT(config != NULL);
-    _config = config;
-    _config->setLink(this);
-
-    // We're doing it wrong - because the Qt folks got the API wrong:
-    // http://blog.qt.digia.com/blog/2010/06/17/youre-doing-it-wrong/
+    Q_ASSERT(_udpConfig);
     moveToThread(this);
 }
 
 UDPLink::~UDPLink()
 {
-    // Disconnect link from configuration
-    _config->setLink(NULL);
     _disconnect();
     // Tell the thread to exit
     _running = false;
@@ -121,17 +116,17 @@ void UDPLink::_restartConnection()
 
 QString UDPLink::getName() const
 {
-    return _config->name();
+    return _udpConfig->name();
 }
 
 void UDPLink::addHost(const QString& host)
 {
-    _config->addHost(host);
+    _udpConfig->addHost(host);
 }
 
 void UDPLink::removeHost(const QString& host)
 {
-    _config->removeHost(host);
+    _udpConfig->removeHost(host);
 }
 
 void UDPLink::_writeBytes(const QByteArray data)
@@ -143,7 +138,7 @@ void UDPLink::_writeBytes(const QByteArray data)
     // Send to all connected systems
     QString host;
     int port;
-    if(_config->firstHost(host, port)) {
+    if(_udpConfig->firstHost(host, port)) {
         do {
             QHostAddress currentHost(host);
             if(_socket->writeDatagram(data, currentHost, (quint16)port) < 0) {
@@ -162,10 +157,10 @@ void UDPLink::_writeBytes(const QByteArray data)
                 // unit sent by UDP.
                 _logOutputDataRate(data.size(), QDateTime::currentMSecsSinceEpoch());
             }
-        } while (_config->nextHost(host, port));
+        } while (_udpConfig->nextHost(host, port));
         //-- Remove hosts that are no longer there
         foreach (const QString& ghost, goneHosts) {
-            _config->removeHost(ghost);
+            _udpConfig->removeHost(ghost);
         }
     }
 }
@@ -194,7 +189,7 @@ void UDPLink::readBytes()
         // added to the list and will start receiving datagrams from here. Even a port scanner
         // would trigger this.
         // Add host to broadcast list if not yet present, or update its port
-        _config->addHost(sender.toString(), (int)senderPort);
+        _udpConfig->addHost(sender.toString(), (int)senderPort);
     }
     //-- Send whatever is left
     if(databuffer.size()) {
@@ -248,7 +243,7 @@ bool UDPLink::_hardwareConnect()
     QHostAddress host = QHostAddress::AnyIPv4;
     _socket = new QUdpSocket();
     _socket->setProxy(QNetworkProxy::NoProxy);
-    _connectState = _socket->bind(host, _config->localPort(), QAbstractSocket::ReuseAddressHint | QUdpSocket::ShareAddress);
+    _connectState = _socket->bind(host, _udpConfig->localPort(), QAbstractSocket::ReuseAddressHint | QUdpSocket::ShareAddress);
     if (_connectState) {
         //-- Make sure we have a large enough IO buffers
 #ifdef __mobile__
@@ -258,7 +253,7 @@ bool UDPLink::_hardwareConnect()
         _socket->setSocketOption(QAbstractSocket::SendBufferSizeSocketOption,    256 * 1024);
         _socket->setSocketOption(QAbstractSocket::ReceiveBufferSizeSocketOption, 512 * 1024);
 #endif
-        _registerZeroconf(_config->localPort(), kZeroconfRegistration);
+        _registerZeroconf(_udpConfig->localPort(), kZeroconfRegistration);
         QObject::connect(_socket, &QUdpSocket::readyRead, this, &UDPLink::readBytes);
         emit connected();
     } else {

src/comm/UDPLink.h

@@ -177,10 +177,7 @@ public:
     bool connect(void);
     bool disconnect(void);
 
-    LinkConfiguration* getLinkConfiguration() { return _config; }
-
 public slots:
-
     /*! @brief Add a new host to broadcast messages to */
     void addHost    (const QString& host);
     /*! @brief Remove a host from broadcasting messages to */
@@ -189,23 +186,11 @@ public slots:
     void readBytes();
 
 private slots:
-    /*!
-     * @brief Write a number of bytes to the interface.
-     *
-     * @param data Pointer to the data byte array
-     * @param size The size of the bytes array
-     **/
     void _writeBytes(const QByteArray data);
 
-protected:
-
-    QUdpSocket*         _socket;
-    UDPConfiguration*   _config;
-    bool                _connectState;
-
 private:
     // Links are only created/destroyed by LinkManager so constructor/destructor is not public
-    UDPLink(UDPConfiguration* config);
+    UDPLink(SharedLinkConfigurationPointer& config);
     ~UDPLink();
 
     // From LinkInterface
@@ -223,6 +208,9 @@ private:
 #endif
 
     bool                _running;
+    QUdpSocket*         _socket;
+    UDPConfiguration*   _udpConfig;
+    bool                _connectState;
 };
 
 #endif // UDPLINK_H

src/qgcunittest/LinkManagerTest.cc

@@ -57,29 +57,29 @@ void LinkManagerTest::cleanup(void)
 void LinkManagerTest::_add_test(void)
 {
     Q_ASSERT(_linkMgr);
-    Q_ASSERT(_linkMgr->links()->count() == 0);
+    Q_ASSERT(_linkMgr->links().count() == 0);
     
     _connectMockLink();
     
-    QCOMPARE(_linkMgr->links()->count(), 1);
-    QCOMPARE(_linkMgr->links()->value<MockLink*>(0), _mockLink);
+    QCOMPARE(_linkMgr->links().count(), 1);
+    QCOMPARE(_linkMgr->links().at(0), _mockLink);
 }
 
 void LinkManagerTest::_delete_test(void)
 {
     Q_ASSERT(_linkMgr);
-    Q_ASSERT(_linkMgr->links()->count() == 0);
+    Q_ASSERT(_linkMgr->links().count() == 0);
     
     _connectMockLink();
     _disconnectMockLink();
     
-    QCOMPARE(_linkMgr->links()->count(), 0);
+    QCOMPARE(_linkMgr->links().count(), 0);
 }
 
 void LinkManagerTest::_addSignals_test(void)
 {
     Q_ASSERT(_linkMgr);
-    Q_ASSERT(_linkMgr->links()->count() == 0);
+    Q_ASSERT(_linkMgr->links().count() == 0);
     Q_ASSERT(_multiSpy->checkNoSignals() == true);
     
     _connectMockLink();
@@ -99,7 +99,7 @@ void LinkManagerTest::_addSignals_test(void)
 void LinkManagerTest::_deleteSignals_test(void)
 {
     Q_ASSERT(_linkMgr);
-    Q_ASSERT(_linkMgr->links()->count() == 0);
+    Q_ASSERT(_linkMgr->links().count() == 0);
     Q_ASSERT(_multiSpy->checkNoSignals() == true);
     
     _connectMockLink();

src/qgcunittest/TCPLinkTest.cc

@@ -17,8 +17,7 @@
 #include "TCPLoopBackServer.h"
 
 TCPLinkTest::TCPLinkTest(void)
-    : _config(NULL)
-    , _link(NULL)
+    : _link(NULL)
     , _multiSpy(NULL)
 {
 
@@ -31,13 +30,12 @@ void TCPLinkTest::init(void)
     
     Q_ASSERT(_link == nullptr);
     Q_ASSERT(_multiSpy == nullptr);
-    Q_ASSERT(_config == nullptr);
 
-    _config = new TCPConfiguration("MockTCP");
-    _config->setAddress(QHostAddress::LocalHost);
-    _config->setPort(5760);
-    _link = new TCPLink(_config);
-    Q_ASSERT(_link != NULL);
+    TCPConfiguration* tcpConfig = new TCPConfiguration("MockTCP");
+    tcpConfig->setAddress(QHostAddress::LocalHost);
+    tcpConfig->setPort(5760);
+    _sharedConfig = SharedLinkConfigurationPointer(tcpConfig);
+    _link = new TCPLink(_sharedConfig);
 
     _rgSignals[bytesReceivedSignalIndex] = SIGNAL(bytesReceived(LinkInterface*, QByteArray));
     _rgSignals[connectedSignalIndex] = SIGNAL(connected(void));
@@ -55,7 +53,6 @@ void TCPLinkTest::cleanup(void)
 {
     Q_ASSERT(_multiSpy);
     Q_ASSERT(_link);
-    Q_ASSERT(_config);
 
     delete _multiSpy;
     _multiSpy = nullptr;
@@ -63,15 +60,13 @@ void TCPLinkTest::cleanup(void)
     delete _link;
     _link = nullptr;
 
-    delete _config;
-    _config = nullptr;
+    _sharedConfig.clear();
 
     UnitTest::cleanup();
 }
 
 void TCPLinkTest::_connectFail_test(void)
 {
-    Q_ASSERT(_config);
     Q_ASSERT(_link);
     Q_ASSERT(_multiSpy);
     Q_ASSERT(_multiSpy->checkNoSignals() == true);
@@ -110,7 +105,8 @@ void TCPLinkTest::_connectSucceed_test(void)
     Q_ASSERT(_multiSpy->checkNoSignals() == true);
 
     // Start the server side
-    TCPLoopBackServer* server = new TCPLoopBackServer(_config->address(), _config->port());
+    TCPConfiguration* tcpConfig = qobject_cast<TCPConfiguration*>(_sharedConfig.data());
+    TCPLoopBackServer* server = new TCPLoopBackServer(tcpConfig->address(), tcpConfig->port());
     Q_CHECK_PTR(server);
     
     // Connect to the server

src/qgcunittest/TCPLinkTest.h

@@ -60,11 +60,11 @@ private:
         //deleteLinkSignalMask =          1 << deleteLinkSignalIndex,
     };
     
-    TCPConfiguration*   _config;
-    TCPLink*            _link;
-    MultiSignalSpy*     _multiSpy;
-    static const size_t _cSignals = maxSignalIndex;
-    const char*         _rgSignals[_cSignals];
+    SharedLinkConfigurationPointer  _sharedConfig;
+    TCPLink*                        _link;
+    MultiSignalSpy*                 _multiSpy;
+    static const size_t             _cSignals = maxSignalIndex;
+    const char*                     _rgSignals[_cSignals];
 };
 
 #endif

src/ui/QGCMAVLinkLogPlayer.cc

@@ -85,7 +85,10 @@ void QGCMAVLinkLogPlayer::_selectLogFileForPlayback(void)
     linkConfig->setLogFilename(logFilename);
     linkConfig->setName(linkConfig->logFilenameShort());
     _ui->logFileNameLabel->setText(linkConfig->logFilenameShort());
-    _replayLink = (LogReplayLink*)qgcApp()->toolbox()->linkManager()->createConnectedLink(linkConfig);
+
+    LinkManager* linkMgr = qgcApp()->toolbox()->linkManager();
+    SharedLinkConfigurationPointer sharedConfig = linkMgr->addConfiguration(linkConfig);
+    _replayLink = (LogReplayLink*)qgcApp()->toolbox()->linkManager()->createConnectedLink(sharedConfig);
 
     connect(_replayLink, &LogReplayLink::logFileStats, this, &QGCMAVLinkLogPlayer::_logFileStats);
     connect(_replayLink, &LogReplayLink::playbackStarted, this, &QGCMAVLinkLogPlayer::_playbackStarted);