diff --git a/translations/qgc_json_az_AZ.ts b/translations/qgc_json_az_AZ.ts index 60de1820817f5083c98ccfd775570ee52f7d543f..3c7476606ee82406962d13b9c43bc41ef413215b 100644 --- a/translations/qgc_json_az_AZ.ts +++ b/translations/qgc_json_az_AZ.ts @@ -1186,37 +1186,37 @@ .QGC.MetaData.Facts[CameraMode].shortDescription, Specify whether the camera should switch to Photo, Video or Survey mode - Specify whether the camera should switch to Photo, Video or Survey mode + Kameranın Foto, Video və ya Dolanma rejiminə keçib-keçməməyinizi təyin edin .QGC.MetaData.Facts[CameraPhotoIntervalTime].shortDescription, Specify the time between each photo - Specify the time between each photo + Hər fotoşəkil arasındakı vaxtı göstərin .QGC.MetaData.Facts[CameraMode].enumStrings, Photo,Video,Survey - Photo,Video,Survey + Foto,Video,Dolanma .QGC.MetaData.Facts[GimbalYaw].shortDescription, Gimbal yaw rotation. - Gimbal yaw rotation. + Gimbal yaw fırlanma. .QGC.MetaData.Facts[GimbalPitch].shortDescription, Gimbal pitch rotation. - Gimbal pitch rotation. + Gimbal pitch fırlanma. .QGC.MetaData.Facts[CameraAction].enumStrings, No change,Take photo,Take photos (time),Take photos (distance),Stop taking photos,Start recording video,Stop recording video - No change,Take photo,Take photos (time),Take photos (distance),Stop taking photos,Start recording video,Stop recording video + Dəyişiklik yoxdur,Şəkil çəkmək,Şəkil çəkmək (vaxt),Şəkil çəkmək (məsafə),Şəkil çəkməyi dayandırın,Videoya yazmağa başlayın,Video yazmağı dayandırın @@ -1225,37 +1225,37 @@ .QGC.MetaData.Facts[FrontalOverlap].shortDescription, Amount of overlap between images in the forward facing direction. - Amount of overlap between images in the forward facing direction. + İrəli yönəldilmiş istiqamətdə şəkillər arasında üst-üstə düşmə miqdarı. .QGC.MetaData.Facts[DistanceToSurface].shortDescription, Distance vehicle is away from surface. - Distance vehicle is away from surface. + Məsafəli nəqliyyat vasitəsi səthdən uzaqdır. .QGC.MetaData.Facts[ValueSetIsDistance].shortDescription, Value specified is distance to surface. - Value specified is distance to surface. + Göstərilən dəyər səthə məsafədir. .QGC.MetaData.Facts[SideOverlap].shortDescription, Amount of overlap between images in the side facing direction. - Amount of overlap between images in the side facing direction. + Yan tərəfə baxan istiqamətdə görünüşlər arasında üst-üstə düşmənin miqdarı. .QGC.MetaData.Facts[ImageDensity].shortDescription, Image desity at surface. - Image desity at surface. + Səthdəki şəkil sıxlığı. .QGC.MetaData.Facts[CameraName].shortDescription, Camera name. - Camera name. + Kamera adı. @@ -1264,1405 +1264,1405 @@ .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param7.label, Cut off - Cut off + Kəsinti .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].friendlyName, Path planning - Path planning + Yolun planlaşdırılması .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].friendlyName, Wait for distance - Wait for distance + Məsafəni gözləyin .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].friendlyName, Guided enable - Guided enable + Rəhbər etməyi aktiv etmək .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param1.label, Timeout - Timeout + Müddət .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].description, Change to/from inverted flight. - Change to/from inverted flight. + Tərs uçuşa\dan dəyişmək. .mavCmdInfo[MAV_CMD_DO_SET_ROI_NONE].description, Cancels the region of interest. - Cancels the region of interest. + Maraqlanılan bölgəni ləğv edir. .mavCmdInfo[MAV_CMD_DO_SET_RELAY].description, Set relay to a condition. - Set relay to a condition. + Relai vəziyyətə gətirin. .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].description, Set camera trigger distance. - Set camera trigger distance. + Kamera tətikləmək məsafəsini seçin. .mavCmdInfo[MAV_CMD_DO_GRIPPER].param1.label, Gripper id - Gripper id + Gripper id .mavCmdInfo[MAV_CMD_NAV_ALTITUDE_WAIT].friendlyName, Altitude wait - Altitude wait + Hündürlük gözləmək .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].friendlyName, Wait for altitude - Wait for altitude + Hündürlüyü gözləyin .mavCmdInfo[MAV_CMD_DO_SET_SERVO].description, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].description, Set servo to specified PWM value. - Set servo to specified PWM value. + Servonu müəyyən PWM dəyərinə təyin edin. .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].category, .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].category, .mavCmdInfo[MAV_CMD_DO_LAND_START].category, .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].category, Flight control - Flight control + Uçuş kontrolu .mavCmdInfo[MAV_CMD_PREFLIGHT_CALIBRATION].friendlyName, Calibration - Calibration + Kalibrasiya .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].param3.label, Photo count - Photo count + Şəkil sayı .mavCmdInfo[MAV_CMD_DO_SET_HOME].friendlyName, Set launch location - Set launch location + Başlanğıc yerini təyin edin .mavCmdInfo[MAV_CMD_CONDITION_YAW].param3.label, .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].param1.label, Direction - Direction + İstiqamət .mavCmdInfo[MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN].friendlyName, Reboot/Shutdown vehicle - Reboot/Shutdown vehicle + Aparatı yenidən başladın/söndürün .mavCmdInfo[MAV_CMD_DO_SET_SERVO].param1.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param1.label, Servo - Servo + Servo .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param4.label, Stabilize Yaw - Stabilize Yaw + Yaw sabitləşdirin .mavCmdInfo[MAV_CMD_DO_GRIPPER].param2.enumStrings, Release,Grab - Release,Grab + Buraxın, Tutun .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param3.label, Alt/Yaw - Alt/Yaw + Alt/Yaw .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param3.label, Step - Step + Addım .mavCmdInfo[MAV_CMD_CONDITION_GATE].param2.label, Ignore Alt - Ignore Alt + Alt'a məhəl qoyma .mavCmdInfo[MAV_CMD_DO_SET_HOME].param1.enumStrings, Vehicle position,Specified position - Vehicle position,Specified position + Aparatın mövqeyi, Müəyyən edilmiş mövqe .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].friendlyName, Loiter (altitude) - Loiter (altitude) + Loiter (hündürlük) .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param5.label, Exposure - Exposure + Məruz qalmaq .mavCmdInfo[MAV_CMD_DO_REPOSITION].friendlyName, Reposition - Reposition + Təkrar mövqe .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].description, Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command. - Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command. + Cari kursa davam edin və göstərilən hündürlüyə qalxın / enin. Hündürlüyə çatdıqda növbəti əmrə davam edin. .mavCmdInfo[MAV_CMD_NAV_TAKEOFF_LOCAL].friendlyName, Takeoff local - Takeoff local + Qalxış lokal .mavCmdInfo[MAV_CMD_NAV_DELAY].friendlyName, Delay until - Delay until + qədər gecikmə .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].param2.label, Status Frequency - Status Frequency + Vəziyyət Tezliyi .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param1.label, Turns - Turns + Döngələr .mavCmdInfo[MAV_CMD_DO_SET_RELAY].friendlyName, Set relay - Set relay + Releyi təyin edin .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].description, Travel to a position and Loiter around the specified radius indefinitely. - Travel to a position and Loiter around the specified radius indefinitely. + Pozisiyaya gedin və müəyyən olunmuş radius ətrafında qeyri-müəyyən bir vəziyyətdə Loiter edin. .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].friendlyName, Return To Launch - Return To Launch + Qalxış yerinə qayıt .mavCmdInfo[HomeRaw].param6.label, Longitude - Longitude + Uzunluq .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].param1.enumStrings, Hover Mode,Plane Mode - Hover Mode,Plane Mode + Hover rejimi, Plane rejimi .mavCmdInfo[MAV_CMD_DO_SET_ROI].friendlyName, Region of interest - Region of interest + Maraq dairəsi .mavCmdInfo[MAV_CMD_PAYLOAD_PREPARE_DEPLOY].friendlyName, Payload prepare deploy - Payload prepare deploy + Payload yerləşdirməyə hazırlayın .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].param1.enumStrings, Normal,Inverted - Normal,Inverted + Normal,Tərs .mavCmdInfo[MAV_CMD_DO_FOLLOW].friendlyName, Follow Me - Follow Me + Məni izləyin .mavCmdInfo[MAV_CMD_MISSION_START].friendlyName, Mission start - Mission start + Missiya başlanğıcı .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].friendlyName, VTOL Transition - VTOL Transition + VTOL keçidi .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].param1.enumStrings, Climb,Neutral,Descend - Climb,Neutral,Descend + Dırmanma,Neytral,Enmə .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].param1.label, Inverted - Inverted + Tərs .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].description, Travel to a position in 3D space using spline path. - Travel to a position in 3D space using spline path. + Spline yolundan istifadə edərək 3D məkanında bir yerə səyahət edin. .mavCmdInfo[MAV_CMD_DO_SET_MODE].param2.label, Custom Mode - Custom Mode + Xüsusi rejim .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param4.enumStrings, Center,Tangent - Center,Tangent + Mərkəz,Tangent .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].friendlyName, VTOL land - VTOL land + VTOL eniş .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].friendlyName, Cycle servo - Cycle servo + Döngü servo .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param2.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param3.label, Cycles - Cycles + Dövrlər .mavCmdInfo[MAV_CMD_DO_SET_MODE].param3.label, Sub Mode - Sub Mode + Alt rejimi .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].category, .mavCmdInfo[MAV_CMD_DO_PARACHUTE].category, Safety - Safety + Təhlükəsizlik .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].friendlyName, Start image capture - Start image capture + Şəkil çəkməyə başlayın .mavCmdInfo[MAV_CMD_DO_SET_RELAY].param1.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param1.label, Relay # - Relay # + Rele # .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].description, Travel to a position and Loiter around the specified radius for an amount of time. - Travel to a position and Loiter around the specified radius for an amount of time. + Bir mövqeyə səyahət edin və müəyyən bir müddət ərzində müəyyən bir radius ətrafında Loiter edin. .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param2.label, Shutter spd - Shutter spd + Shutter sürət .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param2.label, Full planning - Full planning + Full planlama .mavCmdInfo[MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS].friendlyName, Set sensor offsets - Set sensor offsets + Sensor offsetlərini təyin et .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].friendlyName, Camera trigger distance - Camera trigger distance + Kamera tətikləmə məsafəsi .mavCmdInfo[MAV_CMD_DO_JUMP].description, Mission will continue at the specified item. - Mission will continue at the specified item. + Missiya göstərilən maddədə davam edəcəkdir. .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].description, Travel to a position and Loiter around the specified radius for a number of turns. - Travel to a position and Loiter around the specified radius for a number of turns. + Pozisiyaya gedin və müəyyən olunmuş radius ətrafında bir neçə Loiter edin. .mavCmdInfo[MAV_CMD_NAV_DELAY].description, Delay unti the specified time is reached. - Delay unti the specified time is reached. + Göstərilən vaxt çatana qədər gecikdirin. .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI_NONE].category, .mavCmdInfo[MAV_CMD_DO_SET_ROI].category, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].category, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].category, .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].category, .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].category, .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].category, .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].category, .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].category, .mavCmdInfo[MAV_CMD_VIDEO_STOP_CAPTURE].category, Camera - Camera + Kamera .mavCmdInfo[MAV_CMD_NAV_LAND].param1.label, Abort Alt - Abort Alt + Abort Alt .mavCmdInfo[HomeRaw].param5.label, Latitude - Latitude + Enlik .mavCmdInfo[MAV_CMD_CONDITION_YAW].friendlyName, Wait for Yaw - Wait for Yaw + Yaw üçün gözləyin .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param1.label, Type - Type + Növ .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param3.label, PassThru - PassThru + Keçmək .mavCmdInfo[MAV_CMD_CONDITION_YAW].param4.enumStrings, .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param4.enumStrings, Relative,Absolute - Relative,Absolute + Nisbi,Mütləq .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].param1.label, .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].param1.label, .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].param2.label, Enable - Enable + Aktivləşdirin .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].param7.label, Yaw offset - Yaw offset + Yaw offset .mavCmdInfo[MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES].friendlyName, Get capabilities - Get capabilities + Bacarıqları əldə edin .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].friendlyName, Set moving direction - Set moving direction + Getmə istiqamətini təyin edin .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].description, Sets the region of interest to point towards the next waypoint with optional offsets. - Sets the region of interest to point towards the next waypoint with optional offsets. + İstəyəbağlı offsetlər ilə növbəti yol nöqtəsinə işarə etmək üçün maraq dairəsini təyin edir. .mavCmdInfo[MAV_CMD_START_RX_PAIR].friendlyName, Bind Spektrum receiver - Bind Spektrum receiver + Spektrum qəbuledicisini bağlayın .mavCmdInfo[MAV_CMD_DO_RALLY_LAND].friendlyName, Rally land - Rally land + Rally torpaq .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].param2.enumStrings, Enable,Disable - Enable,Disable + Aktivləşdir, deaktiv edin .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param1.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param1.label, .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].param1.label, .mavCmdInfo[MAV_CMD_NAV_DELAY].param1.label, .mavCmdInfo[MAV_CMD_CONDITION_DELAY].param1.label, Hold - Hold + Gözlət .mavCmdInfo[MAV_CMD_DO_TRIGGER_CONTROL].friendlyName, Trigger control - Trigger control + Tətik nəzarəti .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].category, .mavCmdInfo[MAV_CMD_DO_SET_MODE].category, .mavCmdInfo[MAV_CMD_DO_JUMP].category, .mavCmdInfo[MAV_CMD_DO_SET_HOME].category, .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].category, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].category, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].category, .mavCmdInfo[MAV_CMD_DO_GRIPPER].category, .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].category, Advanced - Advanced + Ətraflı .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].description, Travel to a position in 3D space. - Travel to a position in 3D space. + 3D məkanında bir yerə səyahət edin. .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param3.label, Throttle - Throttle + Throttle .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].friendlyName, Change Altitude - Change Altitude + Hündürlük dəyişdirin .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].description, .mavCmdInfo[MAV_CMD_DO_PARACHUTE].description, Enable/Disable geofence. - Enable/Disable geofence. + Geofensiyanı aktivləşdir/deaktiv edin. .mavCmdInfo[MAV_CMD_DO_SET_SERVO].friendlyName, Set servo - Set servo + Servo təyin edin .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].friendlyName, Takeoff - Takeoff + Qalxış .mavCmdInfo[MAV_CMD_DO_SET_RELAY].param2.label, Value - Value + Dəyər .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param2.label, Zoom - Zoom + Böyütmək .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param3.label, .mavCmdInfo[MAV_CMD_DO_PARACHUTE].param1.label, Trigger - Trigger + tətik .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param6.label, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param5.label, Command - Command + Əmr .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].description, Enable/Disabled guided mode. - Enable/Disabled guided mode. + Rəhbərlik edən rejimi aktivləşdir/deaktiv edin. .mavCmdInfo[MAV_CMD_NAV_LAND].description, Land vehicle at the specified location. - Land vehicle at the specified location. + Aparatı göstərilən yerə endirin. .mavCmdInfo[MAV_CMD_NAV_DELAY].param4.label, Sec (utc) - Sec (utc) + Saniyə (utc) .mavCmdInfo[MAV_CMD_DO_SET_ROI].param3.label, ROI Index - ROI Index + ROI Indeksi .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].friendlyName, Control Mount - Control Mount + Nəzarət Zirvəsi .mavCmdInfo[MAV_CMD_DO_INVERTED_FLIGHT].friendlyName, Inverted flight - Inverted flight + Tərs uçuş .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].description, .mavCmdInfo[MAV_CMD_DO_SET_ROI].description, Sets the region of interest for cameras. - Sets the region of interest for cameras. + Kameralar üçün maraq dairəsini təyin edir. .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].description, Stop taking photos. - Stop taking photos. + Şəkil çəkməyi dayandırın. .mavCmdInfo[MAV_CMD_PANORAMA_CREATE].friendlyName, Create panorama - Create panorama + Panorama yaradın .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].description, Delay the mission until the specified altitide is reached. - Delay the mission until the specified altitide is reached. + Göstərilən hündürlüyə çatana qədər missiyanı gecikdirin. .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param1.label, Session - Session + Sessiya .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param3.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param2.label, Radius - Radius + Radius .mavCmdInfo[MAV_CMD_PREFLIGHT_UAVCAN].friendlyName, UAVCAN configure - UAVCAN configure + UAVCAN konfiqurasiya .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param1.label, Heading wait - Heading wait + Səfər gözləmək .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].friendlyName, Spline waypoint - Spline waypoint + Əyri WP .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].description, Hover straight up to specified altitude, transition to fixed-wing and fly to the specified takeoff location. - Hover straight up to specified altitude, transition to fixed-wing and fly to the specified takeoff location. + Düzgün müəyyən hündürlüyə hover edin, sabit qanadlara keçin və göstərilən qalxış yerinə uçun. .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].category, VTOL - VTOL + VTOL .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].friendlyName, Set camera modes - Set camera modes + Kamera rejimlərini təyin edin .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param4.label, .mavCmdInfo[MAV_CMD_NAV_LAND].param4.label, .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param4.label, .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].param4.label, .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].param4.label, .mavCmdInfo[MAV_CMD_CONDITION_YAW].param1.label, Yaw - Yaw + Yaw .mavCmdInfo[MAV_CMD_PAYLOAD_CONTROL_DEPLOY].friendlyName, Payload control deploy - Payload control deploy + Yük kontrolu yerləşdirilməsi .mavCmdInfo[MAV_CMD_SET_MESSAGE_INTERVAL].friendlyName, Set message interval - Set message interval + Mesaj intervalını təyin edin .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].description, Loiter at specified position until altitude reached. - Loiter at specified position until altitude reached. + Hündürlüyə çatana qədər müəyyən bir vəziyyətdə loiter edin. .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].description, Change speed and/or throttle set points. - Change speed and/or throttle set points. + Sürəti və / və ya tənzimləmə nöqtəsini dəyişdirin. .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].friendlyName, Start video capture - Start video capture + Video çəkməyə başlayın .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param4.label, ISO - ISO + ISO .mavCmdInfo[MAV_CMD_DO_FLIGHTTERMINATION].friendlyName, Flight termination - Flight termination + Uçuş sonlandırılması .mavCmdInfo[HomeRaw].category, .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].category, .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].category, .mavCmdInfo[MAV_CMD_NAV_LAND].category, .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].category, .mavCmdInfo[MAV_CMD_NAV_SPLINE_WAYPOINT].category, .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].category, .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].category, .mavCmdInfo[MAV_CMD_CONDITION_DELAY].category, Basic - Basic + Əsas .mavCmdInfo[MAV_CMD_NAV_GUIDED_ENABLE].param1.enumStrings, Disable,Enable - Disable,Enable + Deaktiv/Aktiv et .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].friendlyName, AutoTune Enable - AutoTune Enable + AutoTune aktiv et .mavCmdInfo[MAV_CMD_CONDITION_YAW].description, Delay the mission until the specified yaw is reached. - Delay the mission until the specified yaw is reached. + Göstərilən yaw çatana qədər missiyanı gecikdirin. .mavCmdInfo[MAV_CMD_DO_JUMP].param2.label, Repeat - Repeat + Təkrarlamaq .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].description, Control onboard camera. - Control onboard camera. + Bortda olan kameranı kontrol et. .mavCmdInfo[MAV_CMD_CONDITION_GATE].description, Delay mission state machine until gate has been reached. - Delay mission state machine until gate has been reached. + Qapı çatana qədər missiya vəziyyət maşınını gecikdir. .mavCmdInfo[MAV_CMD_NAV_DELAY].param2.label, Hour (utc) - Hour (utc) + Saat (utc) .mavCmdInfo[MAV_CMD_DO_FOLLOW_REPOSITION].friendlyName, Vehicle reposition - Vehicle reposition + Aparatların yerləşdirilməsi .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].description, Set camera photo, video modes. - Set camera photo, video modes. + Kamera şəkli, video rejimlərini təyin edin. .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param4.label, Heading goal - Heading goal + Məqsədə səfər edilir .mavCmdInfo[MAV_CMD_DO_GRIPPER].description, Operate EPM gripper. - Operate EPM gripper. + EPM aparatını işləyin. .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].description, Configure the vehicle mount (e.g. gimbal). - Configure the vehicle mount (e.g. gimbal). + Vasitə quraşdırılmasını tənzimləyin (məsələn, gimbal). .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].param2.enumStrings, Take photos,Record video,Survey photo mode - Take photos,Record video,Survey photo mode + Şəkil çəkin, Video yazın, Dolanma foto rejimi .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].friendlyName, Enable geofence - Enable geofence + Geofensiyanı aktivləşdirin .mavCmdInfo[MAV_CMD_CONDITION_YAW].param4.label, .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param4.label, Offset - Offset + Ofset .mavCmdInfo[MAV_CMD_GET_HOME_POSITION].friendlyName, Get launch position - Get launch position + Başlatma mövqeyini alın .mavCmdInfo[MAV_CMD_IMAGE_STOP_CAPTURE].friendlyName, Stop image capture - Stop image capture + Şəkil çəkməyi dayandırın .mavCmdInfo[MAV_CMD_NAV_LAND].friendlyName, Land - Land + Eniş .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].description, Start taking one or more photos. - Start taking one or more photos. + Bir və ya daha çox şəkil çəkməyə başlayın. .mavCmdInfo[MAV_CMD_DO_GRIPPER].friendlyName, Gripper - Gripper + Gripper .mavCmdInfo[MAV_CMD_VIDEO_STOP_CAPTURE].friendlyName, Stop video capture - Stop video capture + Video çəkməyi dayandırın .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param2.label, Shutter - Shutter + Shutter .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].description, Perform flight mode transition. - Perform flight mode transition. + Uçuş rejiminə keçid edin. .mavCmdInfo[MAV_CMD_DO_PAUSE_CONTINUE].friendlyName, Pause/Continue - Pause/Continue + Fasilə / Davam et .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param1.enumStrings, .mavCmdInfo[MAV_CMD_CONDITION_GATE].param2.enumStrings, False,True - False,True + Yalnış, Doğru .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param1.label, Local planning - Local planning + Yerli planlaşdırma .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].param3.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param4.label, Time - Time + Vaxt .mavCmdInfo[MAV_CMD_DO_GRIPPER].param2.label, Action - Action + Hərəkət .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param2.label, Lon/Roll - Lon/Roll + Lon/Roll .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].category, .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].category, .mavCmdInfo[MAV_CMD_CONDITION_YAW].category, .mavCmdInfo[MAV_CMD_CONDITION_GATE].category, Conditionals - Conditionals + Şərtlər .mavCmdInfo[MAV_CMD_CONDITION_YAW].param3.enumStrings, Clockwise,Counter-Clockwise - Clockwise,Counter-Clockwise + Saat istiqamətində, saat yönünün əksinə .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].friendlyName, Guided limits - Guided limits + Rəhbər olan hədlər .mavCmdInfo[MAV_CMD_NAV_DELAY].param3.label, Min (utc) - Min (utc) + Dəq (utc) .mavCmdInfo[MAV_CMD_DO_LAND_START].description, Marker to indicate start of landing sequence. - Marker to indicate start of landing sequence. + Eniş ardıcıllığının başlanğıcını göstərən marker. .mavCmdInfo[MAV_CMD_DO_SET_ROI].param2.label, Mission Index - Mission Index + Missiya indeksi .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].friendlyName, Configure Mount - Configure Mount + Zirvəni tənzimləyin .mavCmdInfo[MAV_CMD_DO_AUTOTUNE_ENABLE].description, AutoTune Enable. - AutoTune Enable. + AutoTune et. .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].friendlyName, Change speed - Change speed + Sürəti dəyişdirin .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param1.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param7.enumStrings, Retract,Neutral,Mavlink Targeting,RC Targeting,GPS Point - Retract,Neutral,Mavlink Targeting,RC Targeting,GPS Point + Geri çək, neytral, Mavlink hədəfləmə, RC hədəfləmə, GPS nöqtəsi .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].description, Configure onboard camera controller. - Configure onboard camera controller. + Bortda olan kamera kontrollerini tənzimləyin. .mavCmdInfo[MAV_CMD_CONDITION_GATE].friendlyName, Condition Gate - Condition Gate + Vəziyyət qapısı .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].description, Launch from the ground and travel towards the specified takeoff position. - Launch from the ground and travel towards the specified takeoff position. + Yerdən başlayın və göstərilən uçuş mövqeyinə doğru səyahət edin. .mavCmdInfo[MAV_CMD_DO_PARACHUTE].param1.enumStrings, Disable,Enable,Release - Disable,Enable,Release + Deaktiv,Aktiv,Sərbəst buraxın .mavCmdInfo[MAV_CMD_DO_CONTROL_VIDEO].friendlyName, Control video - Control video + Videoya nəzarət edin .mavCmdInfo[MAV_CMD_OVERRIDE_GOTO].friendlyName, Override goto - Override goto + Goto ləğv et .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].description, Set moving direction to forward or reverse. - Set moving direction to forward or reverse. + Hərəkət istiqamətini irəli və ya tərsinə təyin edin. .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].description, Delay the mission until within the specified distance of the next waypoint. - Delay the mission until within the specified distance of the next waypoint. + Növbəti WP-ın göstərilən məsafəsinə qədər missiyanı təxirə salın. .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].friendlyName, ROI to next waypoint - ROI to next waypoint + Növbəti yol nöqtəsinə ROI .mavCmdInfo[MAV_CMD_CONDITION_DELAY].description, Delay the mission for the number of seconds. - Delay the mission for the number of seconds. + Missiyanı bir neçə saniyə gecikdirin. .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param3.label, Max Alt - Max Alt + Max Yüks .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param1.enumStrings, Disable,Enable,Enable+reset - Disable,Enable,Enable+reset + Deaktiv,Aktiv,Aktiv+Sıfırlamaq .mavCmdInfo[HomeRaw].description, Planned home position for mission. - Planned home position for mission. + Missiya üçün planlaşdırılan ev mövqeyi. .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].param2.label, Acceptance - Acceptance + Qəbul .mavCmdInfo[MAV_CMD_DO_GO_AROUND].friendlyName, Go around - Go around + ətrafına dolanmaq .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param2.label, Stabilize Roll - Stabilize Roll + Rollı sabitləşdirin .mavCmdInfo[MAV_CMD_CONDITION_DELAY].friendlyName, Delay - Delay + Gecikmə .mavCmdInfo[MAV_CMD_DO_SET_PARAMETER].friendlyName, Set Parameter - Set Parameter + Parametr təyin edin .mavCmdInfo[MAV_CMD_DO_SET_ROI_NONE].friendlyName, Cancel ROI - Cancel ROI + ROI ləğv edin .mavCmdInfo[HomeRaw].friendlyName, Home Position - Home Position + Ev mövqeyi .mavCmdInfo[MAV_CMD_NAV_WAYPOINT].friendlyName, Waypoint - Waypoint + İstiqamət nöqtəsi .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param3.enumStrings, No Trigger,Once Immediately - No Trigger,Once Immediately + Tətikçi yoxdur,dərhal .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].description, Cycle relay on/off for desired cycles/time. - Cycle relay on/off for desired cycles/time. + Dövrə relesini söndür/yandır. .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param2.label, Min Alt - Min Alt + Min Yüks .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param3.label, Stabilize Pitch - Stabilize Pitch + Pitchi sabitləşdirin .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param4.label, Focus lock - Focus lock + Fokus kilidi .mavCmdInfo[MAV_CMD_DO_FENCE_ENABLE].param1.enumStrings, Disable,Disable floor only,Enable - Disable,Disable floor only,Enable + Deaktiv, Yalnız mərtəbə deaktiv et, Aktiv .mavCmdInfo[MAV_CMD_DO_MOTOR_TEST].friendlyName, Motor test - Motor test + Motor test .mavCmdInfo[MAV_CMD_GET_MESSAGE_INTERVAL].friendlyName, Get message interval - Get message interval + Mesaj aralığı alın .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].param4.label, Exit loiter from - Exit loiter from + Loiterdan çıxın .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].friendlyName, Camera control - Camera control + Kamera nəzarəti .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].param6.label, Roll offset - Roll offset + Roll ofset .mavCmdInfo[MAV_CMD_DO_SET_REVERSE].param1.enumStrings, Forward,Reverse - Forward,Reverse + İrəli, tərs .mavCmdInfo[MAV_CMD_DO_PARACHUTE].friendlyName, Trigger parachute - Trigger parachute + Tətik paraşütü .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].param4.label, H Limit - H Limit + H Limit .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].description, Control the vehicle mount (e.g. gimbal). - Control the vehicle mount (e.g. gimbal). + Vasitə quraşdırılmasına nəzarət edin (məsələn, gimbal). .mavCmdInfo[MAV_CMD_DO_JUMP].param1.label, Item # - Item # + Element # .mavCmdInfo[MAV_CMD_PREFLIGHT_STORAGE].friendlyName, Store parameters - Store parameters + Depolamaq parametrləri .mavCmdInfo[MAV_CMD_NAV_VTOL_TAKEOFF].friendlyName, VTOL takeoff - VTOL takeoff + VTOL qalxış .mavCmdInfo[MAV_CMD_DO_SET_MODE].friendlyName, Set flight mode - Set flight mode + Uçuş rejimini təyin edin .mavCmdInfo[MAV_CMD_NAV_LAND_LOCAL].friendlyName, Land local - Land local + Lokal eniş .mavCmdInfo[MAV_CMD_CONDITION_DISTANCE].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_CAM_TRIGG_DIST].param1.label, Distance - Distance + Məsafə .mavCmdInfo[MAV_CMD_IMAGE_START_CAPTURE].param2.label, Interval - Interval + Interval .mavCmdInfo[MAV_CMD_DO_SET_ROI].param1.enumStrings, None,Next waypoint,Mission item,Location,ROI item - None,Next waypoint,Mission item,Location,ROI item + Heç biri, Növbəti istiqamət, Missiya elementi, Mövqe, ROI maddəsi .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].description, Control autonomous path planning. - Control autonomous path planning. + Avtonom yol planlamasına nəzarət edin. .mavCmdInfo[MAV_CMD_DO_REPEAT_RELAY].friendlyName, Cycle relay - Cycle relay + Döngü rölesi .mavCmdInfo[MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_MODE].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_HOME].param1.label, .mavCmdInfo[MAV_CMD_DO_SET_ROI].param1.label, .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param1.label, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param1.label, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param7.label, .mavCmdInfo[MAV_CMD_SET_CAMERA_MODE].param2.label, .mavCmdInfo[MAV_CMD_DO_VTOL_TRANSITION].param1.label, Mode - Mode + Rejim .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].friendlyName, Loiter (turns) - Loiter (turns) + Loiter (dönüş) .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].friendlyName, .mavCmdInfo[MAV_CMD_NAV_LOITER_UNLIM].category, .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].category, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].category, .mavCmdInfo[MAV_CMD_NAV_LOITER_TO_ALT].category, Loiter - Loiter + Loiter .mavCmdInfo[MAV_CMD_DO_SET_ROI_LOCATION].friendlyName, Region of interest (ROI) - Region of interest (ROI) + Maraq dairəsi (ROI) .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].param3.label, Aperture - Aperture + Diyafram .mavCmdInfo[MAV_CMD_DO_LAND_START].friendlyName, Land start - Land start + Eniş start .mavCmdInfo[MAV_CMD_DO_SET_SERVO].param2.label, .mavCmdInfo[MAV_CMD_DO_REPEAT_SERVO].param2.label, PWM - PWM + PWM .mavCmdInfo[MAV_CMD_VIDEO_STOP_CAPTURE].description, Stop video capture. - Stop video capture. + Video çəkməyi dayandırın. .mavCmdInfo[MAV_CMD_COMPONENT_ARM_DISARM].friendlyName, Arm/Disarm - Arm/Disarm + Başla/Söndür .mavCmdInfo[MAV_CMD_NAV_VTOL_LAND].description, Fly to specified location at current altitude, transition to multi-rotor and land. - Fly to specified location at current altitude, transition to multi-rotor and land. + Cari yüksəklikdə göstərilən yerə uçun, çox rotorluya keçin və eniş edin . .mavCmdInfo[MAV_CMD_NAV_PATHPLANNING].param2.enumStrings, Disable,Enable,Enable+reset,Enable+reset route only - Disable,Enable,Enable+reset,Enable+reset route only + Deaktiv et,Aktiv et,Aktiv et və sıfırla,Yalnız marşrutu deaktiv et, .mavCmdInfo[MAV_CMD_DO_GUIDED_LIMITS].description, Set limits for external control - Set limits for external control + Xarici nəzarət üçün məhdudiyyətlər təyin edin .mavCmdInfo[MAV_CMD_DO_SET_MODE].description, Set flight mode. - Set flight mode. + Uçuş rejimini təyin edin. .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONFIGURE].friendlyName, Camera config - Camera config + Kamera konfiqurasiya .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param2.label, Speed - Speed + Sürət .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param4.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param3.enumStrings, .mavCmdInfo[MAV_CMD_DO_MOUNT_CONFIGURE].param2.enumStrings, No,Yes - No,Yes + Xeyr,Bəli .mavCmdInfo[MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET].param5.label, Pitch offset - Pitch offset + Pitch ofset .mavCmdInfo[MAV_CMD_NAV_FOLLOW].friendlyName, Nav follow - Nav follow + Nav izlə .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].friendlyName, Loiter (time) - Loiter (time) + Loiter (vaxt) .mavCmdInfo[MAV_CMD_CONDITION_CHANGE_ALT].param1.label, .mavCmdInfo[MAV_CMD_CONDITION_YAW].param2.label, Rate - Rate + Dərəcə .mavCmdInfo[MAV_CMD_VIDEO_START_CAPTURE].description, Start video capture. - Start video capture. + Video çəkməyə başlayın. .mavCmdInfo[MAV_CMD_DO_MOUNT_CONTROL].param1.label, Lat/Pitch - Lat/Pitch + Enlik/Pitch .mavCmdInfo[MAV_CMD_NAV_TAKEOFF].param1.label, Pitch - Pitch + Pitch .mavCmdInfo[MAV_CMD_DO_SET_MODE].friendlyName, Set mode - Set mode + Rejimi təyin edin .mavCmdInfo[MAV_CMD_NAV_RETURN_TO_LAUNCH].description, Send the vehicle back to the launch position. - Send the vehicle back to the launch position. + Aparatı işə salma mövqeyinə göndərin. .mavCmdInfo[MAV_CMD_DO_JUMP].friendlyName, Jump to item - Jump to item + Elementə keçin .mavCmdInfo[MAV_CMD_DO_DIGICAM_CONTROL].param6.label, Id - Id + Id .mavCmdInfo[MAV_CMD_DO_CHANGE_SPEED].param1.enumStrings, Airspeed,Ground Speed - Airspeed,Ground Speed + Hava sürəti, yer sürəti .mavCmdInfo[MAV_CMD_DO_SET_HOME].description, Changes the launch location either to the current location or a specified location. - Changes the launch location either to the current location or a specified location. + Başlanğıc yerini ya cari yerə, ya da müəyyən edilmiş yerə dəyişdirir. @@ -2671,19 +2671,19 @@ .QGC.MetaData.Facts[GridAngle].shortDescription, Angle for parallel lines of grid. - Angle for parallel lines of grid. + Şəbəkənin paralel xətləri üçün bucaq. .QGC.MetaData.Facts[SplitConcavePolygons].shortDescription, Split mission concave polygons into separate regular, convex polygons. - Split mission concave polygons into separate regular, convex polygons. + Missiyanı konkav poliqonlarını ayrı-ayrı müntəzəm, konveks çoxbucaqlılara bölün. .QGC.MetaData.Facts[FlyAlternateTransects].shortDescription, Fly every other transect in each pass. - Fly every other transect in each pass. + Hər keçiddə bir-birinə keçin. @@ -2692,43 +2692,43 @@ .QGC.MetaData.Facts[CameraTriggerInTurnAround].shortDescription, Camera continues taking images in turn arounds. - Camera continues taking images in turn arounds. + Kamera dönüşlərdə şəkillər çəkməyə davam edir. .QGC.MetaData.Facts[Refly90Degrees].shortDescription, Refly the pattern at a 90 degree angle - Refly the pattern at a 90 degree angle + Nümunəni 90 dərəcə bir açı ilə geri uçun .QGC.MetaData.Facts[TurnAroundDistance].shortDescription, .QGC.MetaData.Facts[TurnAroundDistanceMultiRotor].shortDescription, Amount of additional distance to add outside the survey area for vehicle turn around. - Amount of additional distance to add outside the survey area for vehicle turn around. + Aparatların dönməsi üçün araşdırma sahəsindən kənarda əlavə ediləcək məsafənin miqdarı. .QGC.MetaData.Facts[HoverAndCapture].shortDescription, Stop and Hover at each image point before taking image - Stop and Hover at each image point before taking image + Şəkil çəkmədən əvvəl hər görüntü nöqtəsində dayandırın və hover edin .QGC.MetaData.Facts[TerrainAdjustMaxDescentRate].shortDescription, The maximum descent rate from one waypoint to another when adjusting for terrain. Set to 0 for no max. - The maximum descent rate from one waypoint to another when adjusting for terrain. Set to 0 for no max. + Ərazi üçün tənzimləmə zamanı bir yol nöqtəsindən digərinə maksimum enmə dərəcəsi. Maksimum olmayaraq 0-a təyin edin. .QGC.MetaData.Facts[TerrainAdjustMaxClimbRate].shortDescription, The maximum climb rate from one waypoint to another when adjusting for terrain. Set to 0 for no max. - The maximum climb rate from one waypoint to another when adjusting for terrain. Set to 0 for no max. + Ərazi üçün tənzimləmə zamanı bir yollu nöqtədən digərinə maksimum dırmaşma dərəcəsi. Maksimum olmayaraq 0-a təyin edin. .QGC.MetaData.Facts[TerrainAdjustTolerance].shortDescription, Additional waypoints within the transect will be added if the terrain altitude difference grows larger than this tolerance. - Additional waypoints within the transect will be added if the terrain altitude difference grows larger than this tolerance. + Ərazinin hündürlük fərqi bu tolerantlıqdan daha böyük böyüdükdə, keçidin daxilində əlavə nişan nöqtələri əlavə ediləcəkdir. @@ -2737,43 +2737,43 @@ .QGC.MetaData.Facts[LoiterAltitude].shortDescription, Aircraft will proceed to the loiter point and loiter downwards until it reaches this approach altitude. Once altitude is reached the aircraft will fly to land point at current altitude. - Aircraft will proceed to the loiter point and loiter downwards until it reaches this approach altitude. Once altitude is reached the aircraft will fly to land point at current altitude. + Təyyarə bu yanaşma hündürlüyünə çatana qədər loiter nöqtəsinə və aşağıya doğru irəliləyəcək. Hündürlüyə çatdıqdan sonra aparat cari yüksəklikdə eniş nöqtəsinə uçacaq. .QGC.MetaData.Facts[StopTakingPhotos].shortDescription, Stop taking photos - Stop taking photos + Şəkil çəkməyi dayandırın .QGC.MetaData.Facts[LoiterRadius].shortDescription, Loiter radius. - Loiter radius. + Loiter radius. .QGC.MetaData.Facts[LandingAltitude].shortDescription, Altitude for landing point on ground. - Altitude for landing point on ground. + Yerə enmə nöqtəsi üçün hündürlük. .QGC.MetaData.Facts[StopTakingVideo].shortDescription, Stop taking video - Stop taking video + Video çəkməyi dayandırın .QGC.MetaData.Facts[LandingDistance].shortDescription, Distance between landing and loiter points. - Distance between landing and loiter points. + Eniş və loiter nöqtələri arasındakı məsafə. .QGC.MetaData.Facts[LandingHeading].shortDescription, Heading from loiter point to land point. - Heading from loiter point to land point. + Loiterdən eniş nöqtəsinə səfər. @@ -2782,7 +2782,7 @@ .QGC.MetaData.Facts[Radius].shortDescription, Radius for geofence circle. - Radius for geofence circle. + Geofence dairəsi üçün radius. @@ -2791,37 +2791,37 @@ .QGC.MetaData.Facts[StartFromTop].shortDescription, Start scanning from top of structure. - Start scanning from top of structure. + Quruluşun başından tarama başlayın. .QGC.MetaData.Facts[Layers].shortDescription, Number of scan layers. - Number of scan layers. + Tarama qatlarının sayı. .QGC.MetaData.Facts[ScanBottomAlt].shortDescription, Altitude for the bottomost covered area of the scan. You can adjust this value such that the Bottom Layer Alt will fly above obstacles on the ground. - Altitude for the bottomost covered area of the scan. You can adjust this value such that the Bottom Layer Alt will fly above obstacles on the ground. + Taramanın alt örtüyü üçün hündürlük. Aşağıdakı Alt-ı yerdəki maneələrin üstündən uçması üçün bu dəyəri tənzimləyə bilərsiniz. .QGC.MetaData.Facts[EntranceAltitude].shortDescription, Vehicle will fly to/from the structure at this altitude. - Vehicle will fly to/from the structure at this altitude. + Aparat struktura/dan bu yüksəklidə uçacaq. .QGC.MetaData.Facts[GimbalPitch].shortDescription, Gimbal pitch rotation. - Gimbal pitch rotation. + Gimbal pitch fırlanması. .QGC.MetaData.Facts[StructureHeight].shortDescription, Height of structure being scanned. - Height of structure being scanned. + Struktur hündürlüyü skan edilir. @@ -2830,19 +2830,19 @@ .QGC.MetaData.Facts[Longitude].shortDescription, Longitude of rally point position - Longitude of rally point position + Ralli nöqtəsi mövqeyinin uzunluğu .QGC.MetaData.Facts[RelativeAltitude].shortDescription, Altitude of rally point position (home relative) - Altitude of rally point position (home relative) + Mitinq nöqtəsi mövqeyinin hündürlüyü (evə nisbi) .QGC.MetaData.Facts[Latitude].shortDescription, Latitude of rally point position - Latitude of rally point position + Ralli nöqtəsi mövqeyinin enliyi @@ -2851,19 +2851,19 @@ .QGC.MetaData.Facts[Longitude].shortDescription, Longitude of breach return point position - Longitude of breach return point position + Dönüş nöqtəsi mövqeyinin pozulma uzunluğu .QGC.MetaData.Facts[Altitude].shortDescription, Altitude of breach return point position (Rel) - Altitude of breach return point position (Rel) + Dönüş nöqtəsi mövqeyinin pozulma yüksəkliyi (nisbi) .QGC.MetaData.Facts[Latitude].shortDescription, Latitude of breach return point position - Latitude of breach return point position + Dönüş nöqtəsi mövqeyinin pozulma enliyi @@ -2872,13 +2872,13 @@ .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param4.enumStrings, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param4.enumStrings, Center,Tangent - Center,Tangent + Mərkəz, Tangent .mavCmdInfo[MAV_CMD_NAV_LOITER_TURNS].param4.label, .mavCmdInfo[MAV_CMD_NAV_LOITER_TIME].param4.label, Exit loiter from - Exit loiter from + Loiteri çıx @@ -2887,7 +2887,7 @@ .QGC.MetaData.Defines.StreamRateEnumStrings, Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz - Controlled By Vehicle,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz + Aparat ilə idarə olunur,0 hz,1 hz,2 hz,3 hz,4 hz,5 hz,6 hz,7 hz,8 hz,9 hz,10 hz,50 hz,100 hz @@ -2896,211 +2896,211 @@ .QGC.MetaData.Facts[showRecControl].longDescription, Show recording control in the UI. - Show recording control in the UI. + UI-də səs nəzarətini göstərin. .QGC.MetaData.Facts[rtspTimeout].longDescription, How long to wait before assuming RTSP link is gone. - How long to wait before assuming RTSP link is gone. + RTSP bağlantısının getməsini düşünmədən nə qədər gözləmək lazımdır. .QGC.MetaData.Facts[videoFit].shortDescription, Video Display Fit - Video Display Fit + Video Ekranı Fit .QGC.MetaData.Facts[udpPort].longDescription, UDP port to bind to for video stream. - UDP port to bind to for video stream. + Video stream bağlamaq üçün UDP portu. .QGC.MetaData.Facts[disableWhenDisarmed].longDescription, Disable Video Stream when disarmed. - Disable Video Stream when disarmed. + Aparat xoddan çıxarılanda Video streami deaktiv edin. .QGC.MetaData.Facts[rtspTimeout].shortDescription, RTSP Video Timeout - RTSP Video Timeout + RTSP Video Vaxtı .QGC.MetaData.Facts[videoSource].longDescription, Source for video. UDP, TCP, RTSP and UVC Cameras may be supported depending on Vehicle and ground station version. - Source for video. UDP, TCP, RTSP and UVC Cameras may be supported depending on Vehicle and ground station version. + Video üçün mənbə. UDP, TCP, RTSP və UVC kameralar aparat və yer stansiyasının versiyasından asılı olaraq dəstəklənə bilər. .QGC.MetaData.Facts[gridLines].enumStrings, Hide,Show - Hide,Show + Gizlət, Göstər .QGC.MetaData.Facts[disableWhenDisarmed].shortDescription, Video Stream Disnabled When Armed - Video Stream Disnabled When Armed + Xodda olan zaman video stream deaktiv edildi .QGC.MetaData.Facts[gridLines].shortDescription, Video Grid Lines - Video Grid Lines + Videonun grid xətləri .QGC.MetaData.Facts[aspectRatio].longDescription, Video Aspect Ratio (width / height). Use 0.0 to ignore it. - Video Aspect Ratio (width / height). Use 0.0 to ignore it. + Video aspekt nisbəti (en / boy). Bunu nəzərə almamaq üçün 0.0 istifadə edin. .QGC.MetaData.Facts[recordingFormat].longDescription, Video recording file format. - Video recording file format. + Video qeyd fayl formatı. .QGC.MetaData.Facts[tcpUrl].shortDescription, Video TCP Url - Video TCP Url + Video TCP Url .QGC.MetaData.Facts[videoFit].longDescription, Handle Video Aspect Ratio. - Handle Video Aspect Ratio. + Video aspekt nisbəti idarə edin. .QGC.MetaData.Facts[maxVideoSize].longDescription, Maximum amount of disk space used by video recording. - Maximum amount of disk space used by video recording. + Video qeydindən istifadə edilən disk boşluğunun maksimum miqdarı. .QGC.MetaData.Facts[gridLines].longDescription, Displays a grid overlaid over the video view. - Displays a grid overlaid over the video view. + Video görüntüsünün üstünə örtülmüş bir grid göstərir. .QGC.MetaData.Facts[udpPort].shortDescription, Video UDP Port - Video UDP Port + Video UDP Port .QGC.MetaData.Facts[tcpUrl].longDescription, TCP url address and port to bind to for video stream. Example: 192.168.143.200:3001 - TCP url address and port to bind to for video stream. Example: 192.168.143.200:3001 + TCP URL ünvanı və video stream üçün bağlanacaq port. Misal: 192.168.143.200:3001 .QGC.MetaData.Facts[maxVideoSize].shortDescription, Max Video Storage Usage - Max Video Storage Usage + Max Video yaddaş istifadəsi .QGC.MetaData.Facts[streamEnabled].shortDescription, Video Stream Enabled - Video Stream Enabled + Video stream aktivdir .QGC.MetaData.Facts[videoFit].enumStrings, Fit Width,Fit Height,Stretch - Fit Width,Fit Height,Stretch + Uyğunluğu doldur, genişliyi doldur,Dart .QGC.MetaData.Facts[rtspUrl].shortDescription, Video RTSP Url - Video RTSP Url + Video RTSP Url .QGC.MetaData.Facts[lowLatencyMode].shortDescription, Tweaks video for lower latency - Tweaks video for lower latency + Az gecikmə üçün video çarpın .QGC.MetaData.Facts[recordingFormat].shortDescription, Video Recording Format - Video Recording Format + Video Qeyd Formatı .QGC.MetaData.Facts[streamEnabled].longDescription, Start/Stop Video Stream. - Start/Stop Video Stream. + Video stream başlat / dayandırın. .QGC.MetaData.Facts[recordingFormat].enumStrings, mkv,mov,mp4 - mkv,mov,mp4 + mkv,mov,mp4 .QGC.MetaData.Facts[videoSource].shortDescription, Video source - Video source + Video mənbəyi .QGC.MetaData.Facts[videoSavePath].shortDescription, Video save directory - Video save directory + Video saxlamaq qovluğu .QGC.MetaData.Facts[enableStorageLimit].longDescription, When enabled, old video files will be auto-deleted when the total size of QGC-recorded video exceeds the maximum video storage usage. - When enabled, old video files will be auto-deleted when the total size of QGC-recorded video exceeds the maximum video storage usage. + Aktiv olduqda, köhnə video faylları QGC yazılmış videonun ümumi ölçüsü maksimum video saxlama istifadəsindən çox olduqda avtomatik silinəcəkdir. .QGC.MetaData.Facts[lowLatencyMode].longDescription, If this option is enabled, the rtpjitterbuffer is removed and the video sink is set to assynchronous mode, reducing the latency by about 200 ms. - If this option is enabled, the rtpjitterbuffer is removed and the video sink is set to assynchronous mode, reducing the latency by about 200 ms. + Bu seçim aktiv olarsa, rtpjitterbuffer çıxarılır və video sink asinxron rejimə qoyulur, gecikmə təxminən 200 ms azaldır. .QGC.MetaData.Facts[aspectRatio].shortDescription, Video Aspect Ratio - Video Aspect Ratio + Video aspekt nisbəti .QGC.MetaData.Facts[enableStorageLimit].shortDescription, Enable/Disable Limits on Storage Usage - Enable/Disable Limits on Storage Usage + Saxlama istifadəsində məhdudiyyətləri aktivləşdir / deaktiv edin .QGC.MetaData.Facts[showRecControl].shortDescription, Show Video Record Control - Show Video Record Control + Video Yazı Nəzarətini göstərin .QGC.MetaData.Facts[videoSavePath].longDescription, Directory to save videos to. - Directory to save videos to. + Videoları saxlamaq üçün qovluq. .QGC.MetaData.Facts[rtspUrl].longDescription, RTSP url address and port to bind to for video stream. Example: rtsp://192.168.42.1:554/live - RTSP url address and port to bind to for video stream. Example: rtsp://192.168.42.1:554/live + Video stream bağlamaq üçün RTSP URL ünvanı və port. Misal: rtsp: //192.168.42.1: 554 / canlı @@ -3109,109 +3109,110 @@ .QGC.MetaData.Facts[nmeaUdpPort].shortDescription, Udp port to receive NMEA streams - Udp port to receive NMEA streams + NMEA axınlarını qəbul etmək üçün Udp portu .QGC.MetaData.Facts[autoConnectSiKRadio].longDescription, If this option is enabled GroundControl will automatically connect to a vehicle which is detected on a SiK Radio communication link. - If this option is enabled GroundControl will automatically connect to a vehicle which is detected on a SiK Radio communication link. + Bu seçim aktivdirsə GroundControl avtomatik olaraq SIK Radio rabitə əlaqəsində aşkar edilmiş bir nəqliyyat vasitəsinə qoşulacaqdır. .QGC.MetaData.Facts[autoConnectRTKGPS].shortDescription, Automatically connect to an RTK GPS - Automatically connect to an RTK GPS + Avtomatik olaraq bir RTK GPS-ə qoşulun .QGC.MetaData.Facts[autoConnectUDP].longDescription, If this option is enabled GroundControl will automatically connect to a vehicle which is detected on a UDP communication link. - If this option is enabled GroundControl will automatically connect to a vehicle which is detected on a UDP communication link. + Bu seçim aktivdirsə GroundControl avtomatik olaraq bir UDP rabitə bağlantısında aşkar edilmiş bir aparata qoşulacaqdır. .QGC.MetaData.Facts[autoConnectPX4Flow].longDescription, If this option is enabled GroundControl will automatically connect to a PX4 Flow board which is connected via USB. - If this option is enabled GroundControl will automatically connect to a PX4 Flow board which is connected via USB. + Bu seçim aktivdirsə GroundControl avtomatik olaraq USB vasitəsilə birləşdirilmiş PX4 Flow board-a qoşulacaqdır. .QGC.MetaData.Facts[udpTargetHostPort].shortDescription, UDP target host port for autoconnect - UDP target host port for autoconnect + UDP hədəf bağlantısı avtokonnekt bağlantısı .QGC.MetaData.Facts[autoConnectLibrePilot].longDescription, If this option is enabled GroundControl will automatically connect to a LibrePilot board which is connected via USB. - If this option is enabled GroundControl will automatically connect to a LibrePilot board which is connected via USB. + Bu seçim aktivdirsə GroundControl avtomatik olaraq USB vasitəsilə birləşdirilmiş bir LibrePilot lövhəsinə qoşulacaqdır. .QGC.MetaData.Facts[autoConnectPixhawk].longDescription, If this option is enabled GroundControl will automatically connect to a Pixhawk board which is connected via USB. - If this option is enabled GroundControl will automatically connect to a Pixhawk board which is connected via USB. + Bu seçim aktivdirsə GroundControl avtomatik olaraq USB vasitəsilə qoşulmuş Pixhawk lövhəsinə qoşulacaqdır +. .QGC.MetaData.Facts[autoConnectNmeaPort].shortDescription, .QGC.MetaData.Facts[autoConnectNmeaPort].longDescription, NMEA GPS device for GCS position - NMEA GPS device for GCS position + GCS mövqeyi üçün NMEA GPS cihazı .QGC.MetaData.Facts[autoConnectSiKRadio].shortDescription, Automatically connect to a SiK Radio - Automatically connect to a SiK Radio + Avtomatik olaraq SIK Radio-ya qoşulun .QGC.MetaData.Facts[autoConnectUDP].shortDescription, Automatically open a connection over UDP - Automatically open a connection over UDP + Avtomatik olaraq UDP üzərindən bir əlaqə açın .QGC.MetaData.Facts[autoConnectNmeaBaud].shortDescription, .QGC.MetaData.Facts[autoConnectNmeaBaud].longDescription, NMEA GPS Baudrate - NMEA GPS Baudrate + NMEA GPS Baud dərəcəsi .QGC.MetaData.Facts[udpListenPort].shortDescription, UDP port for autoconnect - UDP port for autoconnect + Avtomatik əlaqə üçün UDP portu .QGC.MetaData.Facts[udpTargetHostIP].shortDescription, UDP target host IP for autoconnect - UDP target host IP for autoconnect + UDP hədəf avtokonnekt bağlantısı üçün IP .QGC.MetaData.Facts[autoConnectPX4Flow].shortDescription, Automatically connect to a P4 Flow - Automatically connect to a P4 Flow + Avtomatik olaraq bir PX4 axınına qoşulun .QGC.MetaData.Facts[autoConnectPixhawk].shortDescription, Automatically connect to a Pixhawk board - Automatically connect to a Pixhawk board + Avtomatik olaraq Pixhawk lövhəsinə qoşulun .QGC.MetaData.Facts[autoConnectLibrePilot].shortDescription, Automatically connect to a LibrePilot - Automatically connect to a LibrePilot + Avtomatik olaraq LibrePilot-a qoşulun .QGC.MetaData.Facts[autoConnectRTKGPS].longDescription, If this option is enabled GroundControl will automatically connect to an RTK GPS which is connected via USB. - If this option is enabled GroundControl will automatically connect to an RTK GPS which is connected via USB. + Bu seçim aktivdirsə GroundControl avtomatik olaraq USB vasitəsilə birləşdirilmiş bir RTK GPS-ə qoşulacaqdır. @@ -3220,19 +3221,19 @@ .QGC.MetaData.Facts[userBrandImageIndoor].shortDescription, .QGC.MetaData.Facts[userBrandImageOutdoor].shortDescription, User-selected brand image - User-selected brand image + İstifadəçi tərəfindən seçilmiş marka görüntüsü .QGC.MetaData.Facts[userBrandImageOutdoor].longDescription, Location in file system of user-selected brand image (outdoor) - Location in file system of user-selected brand image (outdoor) + İstifadəçi tərəfindən seçilmiş marka görüntüsünün fayl sistemindəki yeri (xarici) .QGC.MetaData.Facts[userBrandImageIndoor].longDescription, Location in file system of user-selected brand image (indoor) - Location in file system of user-selected brand image (indoor) + İstifadəçi tərəfindən seçilmiş marka görüntüsünün fayl sistemindəki yeri (daxili) @@ -3241,49 +3242,49 @@ .QGC.MetaData.Facts[guidedMinimumAltitude].shortDescription, Minimum altitude for guided actions altitude slider. - Minimum altitude for guided actions altitude slider. + Rəhbər hərəkətlər üçün minimum hündürlük sürüşmə. .QGC.MetaData.Facts[showAdditionalIndicatorsCompass].shortDescription, Show additional heading indicators on Compass - Show additional heading indicators on Compass + Compass-da əlavə indikator göstərin .QGC.MetaData.Facts[maxGoToLocationDistance].shortDescription, Maximum distance allowed for Go To Location. - Maximum distance allowed for Go To Location. + Go To yeri üçün icazə verilən maksimum məsafə. .QGC.MetaData.Facts[alternateInstrumentPanel].shortDescription, Use Vertical Instrument Panel instead of the default one - Use Vertical Instrument Panel instead of the default one + Standartın yerinə Şaquli Alətlər Panelindən istifadə edin .QGC.MetaData.Facts[keepMapCenteredOnVehicle].shortDescription, Keep map centered on vehicle - Keep map centered on vehicle + Xəritəni aparatın mərkəzində saxlayın .QGC.MetaData.Facts[guidedMaximumAltitude].shortDescription, Maximum altitude for guided actions altitude slider. - Maximum altitude for guided actions altitude slider. + Rəhbərli hərəkətlər üçün maksimum hündürlük sürüşməsi. .QGC.MetaData.Facts[lockNoseUpCompass].shortDescription, Lock Compass Nose-Up - Lock Compass Nose-Up + Kompas Nose-upı kilidlə .QGC.MetaData.Facts[showLogReplayStatusBar].shortDescription, Show/Hide Log Replay status bar - Show/Hide Log Replay status bar + Log təkrarı barını Göstər/Gizlə @@ -3292,25 +3293,25 @@ .QGC.MetaData.Facts[adsbServerConnectEnabled].shortDescription, Connect to ADSB SBS server - Connect to ADSB SBS server + ADSB SBS serverinə qoşulun .QGC.MetaData.Facts[adsbServerConnectEnabled].longDescription, Connect to ADSB SBS-1 server using specified address/port - Connect to ADSB SBS-1 server using specified address/port + Göstərilən adres / portdan istifadə edərək ADSB SBS-1 serverinə qoşulun .QGC.MetaData.Facts[adsbServerHostAddress].shortDescription, Host address - Host address + Host adresi .QGC.MetaData.Facts[adsbServerPort].shortDescription, Server port - Server port + Server portu @@ -3319,409 +3320,410 @@ .QGC.MetaData.Facts[offlineEditingDescentSpeed].longDescription, This value defines the cruising speed for multi-rotor vehicles for use in calculating mission duration. - This value defines the cruising speed for multi-rotor vehicles for use in calculating mission duration. + Bu dəyər missiya müddətinin hesablanmasında istifadə üçün çox rotorlu nəqliyyat vasitələrinin kruiz sürətini müəyyənləşdirir. .QGC.MetaData.Facts[saveCsvTelemetry].longDescription, If this option is enabled, all Facts will be written to a CSV file with a 1 Hertz frequency. - If this option is enabled, all Facts will be written to a CSV file with a 1 Hertz frequency. + Bu seçim aktiv olarsa, bütün faktlar 1 Hertz tezliyi olan CSV sənədinə yazılacaqdır. .QGC.MetaData.Facts[virtualJoystick].longDescription, If this option is enabled the virtual joystick will be shown on the Fly view. - If this option is enabled the virtual joystick will be shown on the Fly view. + Bu seçim effektivdirsə, virtual joystick uçuş görüntüsündə göstəriləcək. .QGC.MetaData.Facts[mapboxToken].shortDescription, Access token to Mapbox maps - Access token to Mapbox maps + Mapbox xəritələrinə giriş nişanı .QGC.MetaData.Facts[savePath].longDescription, Directory to which all data files are saved/loaded from - Directory to which all data files are saved/loaded from + Bütün məlumat fayllarının saxlanıldığı / yükləndiyi qovluq .QGC.MetaData.Facts[virtualJoystickAutoCenterThrottle].longDescription, If enabled the throttle stick will snap back to center when released. - If enabled the throttle stick will snap back to center when released. + Əgər işə salınsa, throttle çubuğu sərbəst buraxıldıqdan sonra yenidən mərkəzə yapışacaq. .QGC.MetaData.Facts[indoorPalette].enumStrings, Indoor,Outdoor - Indoor,Outdoor + İçəri,Bayır .QGC.MetaData.Facts[virtualJoystickAutoCenterThrottle].shortDescription, Auto-Center Throttle - Auto-Center Throttle + Avto-Mərkəz Throttle .QGC.MetaData.Facts[showLargeCompass].longDescription, Show large compass on instrument panel - Show large compass on instrument panel + Alət panelində böyük kompas göstərin .QGC.MetaData.Facts[followTarget].enumStrings, Never,Always,When in Follow Me Flight Mode - Never,Always,When in Follow Me Flight Mode + Heç vaxt, Həmişə, Uçuş rejimi məni izlədikdə .QGC.MetaData.Facts[offlineEditingVehicleType].shortDescription, Offline editing vehicle type - Offline editing vehicle type + Oflayn tənzimləmə vasitəsi növü .QGC.MetaData.Facts[autoLoadMissions].shortDescription, AutoLoad mission on vehicle connect - AutoLoad mission on vehicle connect + Aparata qoşulma üzrə AutoLoad missiyası .QGC.MetaData.Facts[language].enumStrings, System,български (Bulgarian),中文 (Chinese),Nederlands (Dutch),English,Suomi (Finnish),Français (French),Deutsche (German),Ελληνικά (Greek), עברית (Hebrew),Italiano (Italian),日本人 (Japanese),한국어 (Korean),Norsk (Norwegian),Polskie (Polish),Português (Portuguese),Pусский (Russian),Español (Spanish),Svenska (Swedish),Türk (Turkish) - System,български (Bulgarian),中文 (Chinese),Nederlands (Dutch),English,Suomi (Finnish),Français (French),Deutsche (German),Ελληνικά (Greek), עברית (Hebrew),Italiano (Italian),日本人 (Japanese),한국어 (Korean),Norsk (Norwegian),Polskie (Polish),Português (Portuguese),Pусский (Russian),Español (Spanish),Svenska (Swedish),Türk (Turkish) + System,български (Bulgarian),中文 (Chinese),Nederlands (Dutch),English,Suomi (Finnish),Français (French),Deutsche (German),Ελληνικά (Greek), עברית (Hebrew),Italiano (Italian),日本人 (Japanese),한국어 (Korean),Norsk (Norwegian),Polskie (Polish),Português (Portuguese),Pусский (Russian),Español (Spanish),Svenska (Swedish),Türk (Turkish) + .QGC.MetaData.Facts[checkInternet].shortDescription, Check Internet connection - Check Internet connection + İnternet bağlantısını yoxlayın .QGC.MetaData.Facts[enableMicrohard].shortDescription, .QGC.MetaData.Facts[enableMicrohard].longDescription, Enable Microhard Module Support - Enable Microhard Module Support + Microhard modulu dəstəyini aktiv edin .QGC.MetaData.Facts[telemetrySave].shortDescription, Save telemetry Log after each flight - Save telemetry Log after each flight + Hər uçuşdan sonra telemetriya Girişinə qənaət edin .QGC.MetaData.Facts[useChecklist].longDescription, If this option is enabled the preflight checklist will be used. - If this option is enabled the preflight checklist will be used. + Bu seçim aktiv olarsa, ön işıqfordan istifadə siyahısı istifadə olunur. .QGC.MetaData.Facts[gstDebugLevel].shortDescription, Video streaming debug - Video streaming debug + Video stream debug .QGC.MetaData.Facts[telemetrySave].longDescription, If this option is enabled a telemetry will be saved after each flight completes. - If this option is enabled a telemetry will be saved after each flight completes. + Bu seçim aktiv olarsa, hər bir uçuş başa çatdıqdan sonra bir telemetriya yaddaşda saxlanılnacaq. .QGC.MetaData.Facts[offlineEditingHoverSpeed].longDescription, This value defines the default speed for calculating mission statistics for multi-rotor vehicles or VTOL vehicle in multi-rotor mode. It does not modify the flight speed for a specific flight plan. - This value defines the default speed for calculating mission statistics for multi-rotor vehicles or VTOL vehicle in multi-rotor mode. It does not modify the flight speed for a specific flight plan. + Bu dəyər çox rotorlu aparat və ya VTOL aparatı üçün missiya statistikasını hesablamaq üçün standart sürəti təyin edir. Müəyyən bir uçuş planı üçün uçuş sürətini dəyişdirmir. .QGC.MetaData.Facts[language].shortDescription, Language - Language + Dil .QGC.MetaData.Facts[firstRunPromptIdsShown].shortDescription, Comma separated list of first run prompt ids which have already been shown. - Comma separated list of first run prompt ids which have already been shown. + Əvvəlcədən göstərilən ilk işə salma idlərinin vergüllə ayrılmış siyahısı. .QGC.MetaData.Facts[appFontPointSize].shortDescription, Application font size - Application font size + Tətbiq şriftinin ölçüsü .QGC.MetaData.Facts[telemetrySaveNotArmed].longDescription, If this option is enabled a telemtry log will be saved even if vehicle was never armed. - If this option is enabled a telemtry log will be saved even if vehicle was never armed. + Bu seçim işə salınarsa, vasitə heç vaxt xodda olmamış olsa belə telemetriya qeydləri yaddaşda saxlanılacaqdır. .QGC.MetaData.Facts[offlineEditingFirmwareType].shortDescription, Offline editing firmware type - Offline editing firmware type + Oflayn tənzimləmə firmvare növü .QGC.MetaData.Facts[defaultFirmwareType].shortDescription, Default firmware type for flashing - Default firmware type for flashing + Yanıb-sönmək üçün standart firmvare növü .QGC.MetaData.Facts[mapboxToken].longDescription, Your personal access token for Mapbox maps - Your personal access token for Mapbox maps + Mapbox xəritələri üçün şəxsi giriş imkanınız .QGC.MetaData.Facts[userBrandImageIndoor].longDescription, Location in file system of user-selected brand image (indoor) - Location in file system of user-selected brand image (indoor) + İstifadəçi tərəfindən seçilmiş marka görüntüsünün fayl sistemindəki yer (içəri) .QGC.MetaData.Facts[esriToken].shortDescription, Access token to Esri maps - Access token to Esri maps + Esri xəritələrinə giriş nişanı .QGC.MetaData.Facts[enforceChecklist].longDescription, If this option is enabled the preflight checklist must pass before arming. - If this option is enabled the preflight checklist must pass before arming. + Bu seçim aktivdirsə, uçuşöncəsi siyahı yoxlanılması xodlanmadan əvvəl keçməlidir. .QGC.MetaData.Facts[enforceChecklist].shortDescription, Preflight checklist must pass before arming - Preflight checklist must pass before arming + Əvvəlcədən yoxlama siyahısı xodlanmadan əvvəl keçməlidir .QGC.MetaData.Facts[defaultMissionItemAltitude].longDescription, This value specifies the default altitude for new items added to a mission. - This value specifies the default altitude for new items added to a mission. + Bu dəyər, bir missiyaya əlavə edilmiş yeni maddələr üçün standart hündürlüyü göstərir. .QGC.MetaData.Facts[showLargeCompass].shortDescription, Show large compass - Show large compass + Böyük kompas göstərin .QGC.MetaData.Facts[offlineEditingDescentSpeed].shortDescription, Offline editing descent speed - Offline editing descent speed + Oflayn tənzimləmə azalan sürəti .QGC.MetaData.Facts[esriToken].longDescription, Your personal access token for Esri maps - Your personal access token for Esri maps + Esri xəritələri üçün şəxsi giriş imkanınız .QGC.MetaData.Facts[usePairing].longDescription, Use Link Pairing. - Use Link Pairing. + Link qoşulma istifadə edin. .QGC.MetaData.Facts[userBrandImageIndoor].shortDescription, .QGC.MetaData.Facts[userBrandImageOutdoor].shortDescription, User-selected brand image - User-selected brand image + İstifadəçi tərəfindən seçilmiş marka görüntüsü .QGC.MetaData.Facts[savePath].shortDescription, Application save directory - Application save directory + Tətbiq saxlamaq qovluğu .QGC.MetaData.Facts[batteryPercentRemainingAnnounce].shortDescription, Announce battery remaining percent - Announce battery remaining percent + Batareyanın qalan faizini elan edin .QGC.MetaData.Facts[offlineEditingAscentSpeed].shortDescription, Offline editing ascent speed - Offline editing ascent speed + Oflayn tənzimləmə artan sürəti .QGC.MetaData.Facts[offlineEditingVehicleType].enumStrings, Fixed Wing,Multi-Rotor,VTOL,Rover,Sub - Fixed Wing,Multi-Rotor,VTOL,Rover,Sub + Sabit qanad, çox rotor, VTOL, Rover, Sub .QGC.MetaData.Facts[gstDebugLevel].longDescription, Sets the environment variable GST_DEBUG for all pipeline elements on boot. - Sets the environment variable GST_DEBUG for all pipeline elements on boot. + Yükləmə sistemindəki bütün pipeline elementləri üçün mühit dəyişkənliyini GST_DEBUG təyin edir. .QGC.MetaData.Facts[saveCsvTelemetry].shortDescription, Save CSV Telementry Logs - Save CSV Telementry Logs + CSV Telemetriya Qeydlərini qeyd edin .QGC.MetaData.Facts[defaultMissionItemAltitude].shortDescription, Default value for altitude - Default value for altitude + Hündürlük üçün standart dəyər .QGC.MetaData.Facts[enableTaisync].shortDescription, .QGC.MetaData.Facts[enableTaisync].longDescription, Enable Taisync Module Support - Enable Taisync Module Support + Taisync modulu dəstəyini aktiv edin .QGC.MetaData.Facts[apmStartMavlinkStreams].shortDescription, Request start of MAVLink telemetry streams (ArduPilot only) - Request start of MAVLink telemetry streams (ArduPilot only) + MAVLink telemetriya axınlarının başlamasını tələb edin (yalnız ArduPilot) .QGC.MetaData.Facts[disableAllPersistence].shortDescription, Disable all data persistence - Disable all data persistence + Bütün məlumatlar davamlılığını deaktiv edin .QGC.MetaData.Facts[batteryPercentRemainingAnnounce].longDescription, Announce the remaining battery percent when it falls below the specified percentage. - Announce the remaining battery percent when it falls below the specified percentage. + Qalan batareya faizləri göstərilən faizdən aşağı olduqda elan edin. .QGC.MetaData.Facts[indoorPalette].shortDescription, Application color scheme - Application color scheme + Tətbiq rəng sxemi .QGC.MetaData.Facts[offlineEditingCruiseSpeed].shortDescription, Offline editing cruise speed - Offline editing cruise speed + Oflayn tənzimləmə kruiz sürəti .QGC.MetaData.Facts[disableAllPersistence].longDescription, If this option is set, nothing will be saved to disk. - If this option is set, nothing will be saved to disk. + Bu seçim qoyulursa, heç bir şey diskdə saxlanılmayacaqdır. .QGC.MetaData.Facts[autoLoadMissions].longDescription, Automatically load a mission file named AutoLoad#.mission when a vehicle with id # connects. - Automatically load a mission file named AutoLoad#.mission when a vehicle with id # connects. + İd # nömrəli bir vasitə bağlandıqda AutoLoad#.mission adlı bir tapşırıq sənədini avtomatik olaraq yükləyin. .QGC.MetaData.Facts[audioMuted].shortDescription, Mute audio output - Mute audio output + Audio çıxışını səssizə al .QGC.MetaData.Facts[offlineEditingHoverSpeed].shortDescription, Offline editing hover speed - Offline editing hover speed + Oflayn tənzimləmə hover sürəti .QGC.MetaData.Facts[offlineEditingAscentSpeed].longDescription, This value defines the ascent speed for multi-rotor vehicles for use in calculating mission duration. - This value defines the ascent speed for multi-rotor vehicles for use in calculating mission duration. + Bu dəyər missiya müddətinin hesablanmasında istifadə üçün çox rotorlu nəqliyyat vasitələrinin enmə sürətini müəyyənləşdirir. .QGC.MetaData.Facts[virtualJoystick].shortDescription, Show virtual joystick - Show virtual joystick + Virtual joystik göstərin .QGC.MetaData.Facts[appFontPointSize].longDescription, The point size for the default font used. - The point size for the default font used. + İstifadə olunan standart şrift üçün nöqtə ölçüsü. .QGC.MetaData.Facts[audioMuted].longDescription, If this option is enabled all audio output will be muted. - If this option is enabled all audio output will be muted. + Bu seçim işə düşsə, bütün səs çıxışı sönəcəkdir. .QGC.MetaData.Facts[userBrandImageOutdoor].longDescription, Location in file system of user-selected brand image (outdoor) - Location in file system of user-selected brand image (outdoor) + İstifadəçi tərəfindən seçilmiş marka görüntüsünün fayl sistemindəki yeri (xarici) .QGC.MetaData.Facts[checkInternet].longDescription, Check Internet connection before accessing Internet resources. - Check Internet connection before accessing Internet resources. + nternet resurslarına girmədən əvvəl İnternet bağlantısını yoxlayın. .QGC.MetaData.Facts[usePairing].shortDescription, Use Pairing - Use Pairing + Cütləşməni istifadə edin .QGC.MetaData.Facts[telemetrySaveNotArmed].shortDescription, Save telemetry log even if vehicle was not armed - Save telemetry log even if vehicle was not armed + Vasitə xodda olmayan vaxt telemetriya qeydlərini qeyd edin .QGC.MetaData.Facts[offlineEditingFirmwareType].enumStrings, ArduPilot,PX4 Pro,Mavlink Generic - ArduPilot,PX4 Pro,Mavlink Generic + ArduPilot,PX4 Pro,Mavlink Generic .QGC.MetaData.Facts[indoorPalette].longDescription, The color scheme for the user interface. - The color scheme for the user interface. + İstifadəçi interfeysi üçün rəng sxemi. .QGC.MetaData.Facts[followTarget].shortDescription, Stream GCS' coordinates to Autopilot - Stream GCS' coordinates to Autopilot + GCS'in Autopilot'a əlaqələndirilməsi .QGC.MetaData.Facts[offlineEditingCruiseSpeed].longDescription, This value defines the default speed for calculating mission statistics for vehicles which do not support hover or VTOL vehicles in fixed wing mode. It does not modify the flight speed for a specific flight plan. - This value defines the default speed for calculating mission statistics for vehicles which do not support hover or VTOL vehicles in fixed wing mode. It does not modify the flight speed for a specific flight plan. + Bu dəyər sabit qanad rejimində hover və ya VTOL nəqliyyat vasitələrini dəstəkləməyən nəqliyyat vasitələri üçün missiya statistikasını hesablamaq üçün standart sürəti müəyyənləşdirir. Müəyyən bir uçuş planı üçün uçuş sürətini dəyişdirmir. .QGC.MetaData.Facts[enableTaisyncVideo].shortDescription, .QGC.MetaData.Facts[enableTaisyncVideo].longDescription, Enable Taisync Video Support - Enable Taisync Video Support + Taisync Video Dəstəyi aktiv et .QGC.MetaData.Facts[useChecklist].shortDescription, Use preflight checklist - Use preflight checklist + Əvvəlcədən yoxlama siyahısından istifadə edin @@ -3730,85 +3732,85 @@ .QGC.MetaData.Facts[surveyInAccuracyLimit].shortDescription, Survey in accuracy (U-blox only) - Survey in accuracy (U-blox only) + Dəqiqliklə araşdırma (yalnız U-blox) .QGC.MetaData.Facts[useFixedBasePosition].longDescription, Specify the values for the RTK base position without having to do a survey in. - Specify the values for the RTK base position without having to do a survey in. + Sorğu etmədən RTK bazası mövqeyi üçün dəyərləri göstərin. .QGC.MetaData.Facts[fixedBasePositionLatitude].shortDescription, Base Position Latitude - Base Position Latitude + Baza Mövqe Enliyi .QGC.MetaData.Facts[surveyInMinObservationDuration].longDescription, Defines the minimum amount of observation time for the position calculation. - Defines the minimum amount of observation time for the position calculation. + Mövqe hesablanması üçün minimum müşahidə müddətini müəyyənləşdirir. .QGC.MetaData.Facts[fixedBasePositionAccuracy].shortDescription, Base Position Accuracy - Base Position Accuracy + Baza Mövqeyi Dəqiqliyi .QGC.MetaData.Facts[fixedBasePositionAltitude].shortDescription, Base Position Alt (WGS84) - Base Position Alt (WGS84) + Baza Mövqe Yüksəkliyi (WGS84) .QGC.MetaData.Facts[fixedBasePositionAltitude].longDescription, Defines the altitude of the fixed RTK base position. - Defines the altitude of the fixed RTK base position. + Sabit RTK baza mövqeyinin yüksəkliyini müəyyənləşdirir. .QGC.MetaData.Facts[surveyInAccuracyLimit].longDescription, The minimum accuracy value that Survey-In must achieve before it can complete. - The minimum accuracy value that Survey-In must achieve before it can complete. + Dolanma başa çatdırmadan əvvəl əldə etməli olduğu minimum dəqiqlik dəyəri. .QGC.MetaData.Facts[useFixedBasePosition].shortDescription, Use specified base position - Use specified base position + Müəyyən edilmiş baza mövqeyindən istifadə edin .QGC.MetaData.Facts[surveyInMinObservationDuration].shortDescription, Minimum observation time - Minimum observation time + Minimum müşahidə vaxtı .QGC.MetaData.Facts[fixedBasePositionLongitude].longDescription, Defines the longitude of the fixed RTK base position. - Defines the longitude of the fixed RTK base position. + Sabit RTK baza mövqeyinin uzunluğunu müəyyənləşdirir. .QGC.MetaData.Facts[fixedBasePositionLongitude].shortDescription, Base Position Longitude - Base Position Longitude + Baza mövqeyi uzunluq .QGC.MetaData.Facts[fixedBasePositionAccuracy].longDescription, Defines the accuracy of the fixed RTK base position. - Defines the accuracy of the fixed RTK base position. + Sabit RTK baza mövqeyinin düzgünlüyünü müəyyənləşdirir. .QGC.MetaData.Facts[fixedBasePositionLatitude].longDescription, Defines the latitude of the fixed RTK base position. - Defines the latitude of the fixed RTK base position. + Sabit RTK baza mövqeyinin enini müəyyənləşdirir. @@ -3817,13 +3819,13 @@ .QGC.MetaData.Facts[mapType].shortDescription, Currently selected map type for flight maps - Currently selected map type for flight maps + Uçuş xəritələri üçün hazırda seçilmiş xəritə növü .QGC.MetaData.Facts[mapProvider].shortDescription, Currently selected map provider for flight maps - Currently selected map provider for flight maps + Uçuş xəritələri üçün hazırda seçilmiş xəritə təminatçısıdır @@ -3832,19 +3834,19 @@ .QGC.MetaData.Facts[defaultFirmwareType].shortDescription, Default firmware type for flashing - Default firmware type for flashing + Yanıb-sönmək üçün standart firmaware növü .QGC.MetaData.Facts[apmVehicleType].enumStrings, Multi-Rotor,Helicopter,Plane,Rover,Sub - Multi-Rotor,Helicopter,Plane,Rover,Sub + Çox Rotor, Vertolyot, Təyyarə, Rover, Sub .QGC.MetaData.Facts[apmChibiOS].enumStrings, ChibiOS,NuttX - ChibiOS,NuttX + ChibiOS,NuttX @@ -3853,37 +3855,37 @@ .QGC.MetaData.Facts[displayPresetsTabFirst].shortDescription, Display the presets tab at start - Display the presets tab at start + Əvvəlcədən təyin edilmiş nişanları göstərin .QGC.MetaData.Facts[takeoffItemNotRequired].shortDescription, Allow missions to not require a takeoff item - Allow missions to not require a takeoff item + Missiyalara bir uçuş maddəsi tələb etməməsinə icazə verin .QGC.MetaData.Facts[showGimbalOnlyWhenSet].shortDescription, Show gimbal yaw visual only when set explicitly for the waypoint - Show gimbal yaw visual only when set explicitly for the waypoint + Gimbal yaw vizual olaraq yalnız yol nöqtəsi üçün dəqiq təyin edildikdə göstərin .QGC.MetaData.Facts[aboveTerrainWarning].shortDescription, Don't warn user about 'Above Terrain' usage - Don't warn user about 'Above Terrain' usage + İstifadəçini "Yuxarıdan yuxarı" istifadəsi barədə xəbərdar etmə .QGC.MetaData.Facts[showMissionItemStatus].shortDescription, Show/Hide the mission item status display - Show/Hide the mission item status display + Missiya maddə statusu görüntüsünü göstər / gizlə .QGC.MetaData.Facts[useConditionGate].shortDescription, Use MAV_CMD_CONDITION_GATE for pattern generation - Use MAV_CMD_CONDITION_GATE for pattern generation + Nümunə yaratmaq üçün MAV_CMD_CONDITION_GATE istifadə edin @@ -3892,19 +3894,19 @@ .QGC.MetaData.Facts[minZoomLevelDownload].shortDescription, Minimum zoom level for downloads. - Minimum zoom level for downloads. + Yükləmələr üçün minimum böyümə səviyyəsi. .QGC.MetaData.Facts[maxZoomLevelDownload].shortDescription, Maximum zoom level for downloads. - Maximum zoom level for downloads. + Yükləmələr üçün maksimum böyümə səviyyəsi. .QGC.MetaData.Facts[maxTilesForDownload].shortDescription, Maximum number of tiles for download. - Maximum number of tiles for download. + Yükləmə üçün maksimum sayda plitələr. @@ -3913,25 +3915,25 @@ .QGC.MetaData.Facts[Scale].shortDescription, Scale the RC range - Scale the RC range + RC diapazonunu genişləndirin .QGC.MetaData.Facts[MaxValue].shortDescription, Maximum parameter value - Maximum parameter value + Maksimum parametr dəyəri .QGC.MetaData.Facts[MinValue].shortDescription, Minimum parameter value - Minimum parameter value + Minimum parametr dəyəri .QGC.MetaData.Facts[CenterValue].shortDescription, Parameter value when RC output is 0 - Parameter value when RC output is 0 + RC çıxışı 0 olduqda parametr dəyəri @@ -3940,49 +3942,49 @@ .QGC.MetaData.Facts[Easting].shortDescription, Easting of item position - Easting of item position + Maddə mövqeyinin şərqlənməsi .QGC.MetaData.Facts[Latitude].shortDescription, Latitude of item position - Latitude of item position + Maddə mövqeyinin enliyi .QGC.MetaData.Facts[Northing].shortDescription, Northing of item position - Northing of item position + Maddə mövqeyinin şimallanması .QGC.MetaData.Facts[MGRS].shortDescription, MGRS coordinate - MGRS coordinate + MGRS kordinatı .QGC.MetaData.Facts[Zone].shortDescription, UTM zone - UTM zone + UTM zonası .QGC.MetaData.Facts[Hemisphere].shortDescription, Hemisphere for position - Hemisphere for position + Pozisiya üçün yarımkürə .QGC.MetaData.Facts[Hemisphere].enumStrings, North,South - North,South + Şimal,Cənub .QGC.MetaData.Facts[Longitude].shortDescription, Longitude of item position - Longitude of item position + Element mövqeyinin uzunluğu