Skip to content

Q
qgroundcontrol
Commit 61cc29df authored by PX4 Jenkins's avatar PX4 Jenkins Committed by Daniel Agar
Browse files
Options

Update PX4 Firmware metadata Sun Feb 18 04:37:13 UTC 2018

parent c671b68d
Show whitespace changes
Inline Side-by-side
Showing with 123 additions and 28 deletions
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
View file @ 61cc29df
......@@ -3114,7 +3114,7 @@ but also ignore less noise</short_desc>
<min>0</min>
<max>300</max>
<unit>s</unit>
<scope>drivers/iridiumsbd</scope>
<scope>drivers/telemetry/iridiumsbd</scope>
</parameter>
</group>
<group name="Land Detector">
......@@ -3655,17 +3655,41 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<reboot_required>true</reboot_required>
<scope>modules/mavlink</scope>
</parameter>
<parameter default="1" name="MAV_TEST_PAR" type="INT32">
<short_desc>Test parameter</short_desc>
<long_desc>This parameter is not actively used by the system. Its purpose is to allow testing the parameter interface on the communication level.</long_desc>
<min>-1000</min>
<max>1000</max>
<scope>modules/mavlink</scope>
</parameter>
<parameter default="2" name="MAV_TYPE" type="INT32">
<short_desc>MAVLink airframe type</short_desc>
<min>1</min>
<max>27</max>
<scope>modules/mavlink</scope>
<values>
<value code="0">Generic micro air vehicle</value>
<value code="1">Fixed wing aircraft</value>
<value code="2">Quadrotor</value>
<value code="3">Coaxial helicopter</value>
<value code="4">Normal helicopter with tail rotor</value>
<value code="5">Ground installation</value>
<value code="6">Operator control unit / ground control station</value>
<value code="7">Airship, controlled</value>
<value code="8">Free balloon, uncontrolled</value>
<value code="9">Rocket</value>
<value code="10">Ground rover</value>
<value code="11">Surface vessel, boat, ship</value>
<value code="12">Submarine</value>
<value code="13">Hexarotor</value>
<value code="14">Octorotor</value>
<value code="15">Tricopter</value>
<value code="16">Flapping wing</value>
<value code="17">Kite</value>
<value code="18">Onboard companion controller</value>
<value code="19">Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter.</value>
<value code="20">Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter.</value>
<value code="21">Tiltrotor VTOL</value>
<value code="22">VTOL reserved 2</value>
<value code="23">VTOL reserved 3</value>
<value code="24">VTOL reserved 4</value>
<value code="25">VTOL reserved 5</value>
<value code="26">Onboard gimbal</value>
<value code="27">Onboard ADSB peripheral</value>
</values>
</parameter>
<parameter default="0" name="MAV_USEHILGPS" type="INT32">
<short_desc>Use/Accept HIL GPS message even if not in HIL mode</short_desc>
......@@ -3930,6 +3954,15 @@ Used to calculate increased terrain random walk nosie due to movement</short_des
<value code="6">Lockdown</value>
</values>
</parameter>
<parameter default="120.0" name="NAV_RCL_LT" type="FLOAT">
<short_desc>RC Loss Loiter Time (CASA Outback Challenge rules)</short_desc>
<long_desc>The amount of time in seconds the system should loiter at current position before termination. Only applies if NAV_RCL_ACT is set to 2 (CASA Outback Challenge rules). Set to -1 to make the system skip loitering.</long_desc>
<min>-1.0</min>
<unit>s</unit>
<decimal>1</decimal>
<increment>0.1</increment>
<scope>modules/navigator</scope>
</parameter>
<parameter default="1" name="NAV_TRAFF_AVOID" type="INT32">
<short_desc>Set traffic avoidance mode</short_desc>
<long_desc>Enabling this will allow the system to respond to transponder data from e.g. ADSB transponders</long_desc>
......@@ -4503,6 +4536,7 @@ the vehicle will accelerate at this rate until the normal position control speed
is 90 degrees. It should be lower than MPC_XY_CRUISE</short_desc>
<long_desc>Applies only in AUTO modes (includes also RTL / hold / etc.)</long_desc>
<min>1.0</min>
<max>20.0</max>
<unit>m/s</unit>
<decimal>2</decimal>
<increment>1</increment>
......@@ -5568,6 +5602,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC10_TRIM" type="FLOAT">
<short_desc>RC channel 10 trim</short_desc>
......@@ -5606,6 +5644,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC11_TRIM" type="FLOAT">
<short_desc>RC channel 11 trim</short_desc>
......@@ -5644,6 +5686,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC12_TRIM" type="FLOAT">
<short_desc>RC channel 12 trim</short_desc>
......@@ -5682,6 +5728,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC13_TRIM" type="FLOAT">
<short_desc>RC channel 13 trim</short_desc>
......@@ -5720,6 +5770,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC14_TRIM" type="FLOAT">
<short_desc>RC channel 14 trim</short_desc>
......@@ -5758,6 +5812,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC15_TRIM" type="FLOAT">
<short_desc>RC channel 15 trim</short_desc>
......@@ -5796,6 +5854,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC16_TRIM" type="FLOAT">
<short_desc>RC channel 16 trim</short_desc>
......@@ -5834,6 +5896,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC17_TRIM" type="FLOAT">
<short_desc>RC channel 17 trim</short_desc>
......@@ -5872,6 +5938,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC18_TRIM" type="FLOAT">
<short_desc>RC channel 18 trim</short_desc>
......@@ -5911,6 +5981,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500.0" name="RC1_TRIM" type="FLOAT">
<short_desc>RC channel 1 trim</short_desc>
......@@ -5950,6 +6024,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500.0" name="RC2_TRIM" type="FLOAT">
<short_desc>RC channel 2 trim</short_desc>
......@@ -5989,6 +6067,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC3_TRIM" type="FLOAT">
<short_desc>RC channel 3 trim</short_desc>
......@@ -6028,6 +6110,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC4_TRIM" type="FLOAT">
<short_desc>RC channel 4 trim</short_desc>
......@@ -6066,6 +6152,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC5_TRIM" type="FLOAT">
<short_desc>RC channel 5 trim</short_desc>
......@@ -6104,6 +6194,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC6_TRIM" type="FLOAT">
<short_desc>RC channel 6 trim</short_desc>
......@@ -6142,6 +6236,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC7_TRIM" type="FLOAT">
<short_desc>RC channel 7 trim</short_desc>
......@@ -6180,6 +6278,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC8_TRIM" type="FLOAT">
<short_desc>RC channel 8 trim</short_desc>
......@@ -6218,6 +6320,10 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<min>-1.0</min>
<max>1.0</max>
<scope>modules/sensors</scope>
<values>
<value code="-1.0">Reverse</value>
<value code="1.0">Normal</value>
</values>
</parameter>
<parameter default="1500" name="RC9_TRIM" type="FLOAT">
<short_desc>RC channel 9 trim</short_desc>
......@@ -6243,14 +6349,14 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<scope>modules/sensors</scope>
</parameter>
<parameter default="10.0" name="RC_FLT_CUTOFF" type="FLOAT">
<short_desc>Cutoff frequency for the low pass filter on roll,pitch, yaw and throttle</short_desc>
<short_desc>Cutoff frequency for the low pass filter on roll, pitch, yaw and throttle</short_desc>
<long_desc>Does not get set unless below RC_FLT_SMP_RATE/2 because of filter instability characteristics.</long_desc>
<min>0.1</min>
<unit>Hz</unit>
<scope>modules/sensors</scope>
</parameter>
<parameter default="50.0" name="RC_FLT_SMP_RATE" type="FLOAT">
<short_desc>Sample rate of the remote control values for the low pass filter on roll,pitch, yaw and throttle</short_desc>
<short_desc>Sample rate of the remote control values for the low pass filter on roll, pitch, yaw and throttle</short_desc>
<long_desc>Has an influence on the cutoff frequency precision.</long_desc>
<min>1.0</min>
<unit>Hz</unit>
......@@ -6688,17 +6794,6 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<scope>modules/commander</scope>
</parameter>
</group>
<group name="Radio Signal Loss">
<parameter default="120.0" name="NAV_RCL_LT" type="FLOAT">
<short_desc>Loiter Time</short_desc>
<long_desc>The amount of time in seconds the system should loiter at current position before termination Set to -1 to make the system skip loitering</long_desc>
<min>-1.0</min>
<unit>s</unit>
<decimal>1</decimal>
<increment>0.1</increment>
<scope>modules/navigator</scope>
</parameter>
</group>
<group name="Radio Switches">
<parameter default="0.5" name="RC_ACRO_TH" type="FLOAT">
<short_desc>Threshold for selecting acro mode</short_desc>
......@@ -8080,14 +8175,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>LeddarOne rangefinder</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/leddar_one</scope>
</parameter>
<parameter default="0" name="SENS_EN_LL40LS" type="INT32">
<short_desc>Lidar-Lite (LL40LS)</short_desc>
<min>0</min>
<max>2</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/ll40ls</scope>
<values>
<value code="0">Disabled</value>
<value code="1">PWM</value>
......@@ -8098,14 +8193,14 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>Maxbotix Soanr (mb12xx)</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/mb12xx</scope>
</parameter>
<parameter default="0" name="SENS_EN_SF0X" type="INT32">
<short_desc>Lightware laser rangefinder (serial)</short_desc>
<min>0</min>
<max>4</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/sf0x</scope>
<values>
<value code="0">Disabled</value>
<value code="1">SF02</value>
......@@ -8120,7 +8215,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<min>0</min>
<max>5</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/sf1xx</scope>
<values>
<value code="0">Disabled</value>
<value code="1">SF10/a</value>
......@@ -8134,7 +8229,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<short_desc>Benewake TFmini laser rangefinder</short_desc>
<boolean />
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/tfmini</scope>
</parameter>
<parameter default="-1" name="SENS_EN_THERMAL" type="INT32">
<short_desc>Thermal control of sensor temperature</short_desc>
......@@ -8149,7 +8244,7 @@ This is used for gathering replay logs for the ekf2 module</short_desc>
<min>0</min>
<max>3</max>
<reboot_required>true</reboot_required>
<scope>modules/sensors</scope>
<scope>drivers/distance_sensor/teraranger</scope>
<values>
<value code="0">Disabled</value>
<value code="1">Autodetect</value>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment