Skip to content

Q
qgroundcontrol
Commit 48fc19c0 authored by PX4BuildBot's avatar PX4BuildBot
Browse files
Options

Update PX4 Firmware metadata Wed May 27 05:53:56 UTC 2020

parent 48fc09ea
Hide whitespace changes
Inline Side-by-side
Showing with 22 additions and 18 deletions
src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
View file @ 48fc19c0
......@@ -4885,17 +4885,18 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<max>1.0</max>
<decimal>1</decimal>
</parameter>
<parameter default="0.01" name="MPC_XY_VEL_D" type="FLOAT">
<parameter default="0.2" name="MPC_XY_VEL_D_ACC" type="FLOAT">
<short_desc>Differential gain for horizontal velocity error. Small values help reduce fast oscillations. If value is too big oscillations will appear again</short_desc>
<min>0.005</min>
<max>0.1</max>
<long_desc>defined as correction acceleration in m/s^2 per m/s^2 velocity derivative</long_desc>
<min>0.1</min>
<max>2.0</max>
<decimal>3</decimal>
</parameter>
<parameter default="0.02" name="MPC_XY_VEL_I" type="FLOAT">
<parameter default="0.4" name="MPC_XY_VEL_I_ACC" type="FLOAT">
<short_desc>Integral gain for horizontal velocity error</short_desc>
<long_desc>Non-zero value allows to eliminate steady state errors in the presence of disturbances like wind.</long_desc>
<long_desc>defined as correction acceleration in m/s^2 per m velocity integral Non-zero value allows to eliminate steady state errors in the presence of disturbances like wind.</long_desc>
<min>0.0</min>
<max>3.0</max>
<max>60.0</max>
<decimal>3</decimal>
</parameter>
<parameter default="12.0" name="MPC_XY_VEL_MAX" type="FLOAT">
......@@ -4907,10 +4908,11 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<decimal>2</decimal>
<increment>1</increment>
</parameter>
<parameter default="0.09" name="MPC_XY_VEL_P" type="FLOAT">
<parameter default="1.8" name="MPC_XY_VEL_P_ACC" type="FLOAT">
<short_desc>Proportional gain for horizontal velocity error</short_desc>
<min>0.06</min>
<max>0.15</max>
<long_desc>defined as correction acceleration in m/s^2 per m/s velocity error</long_desc>
<min>1.2</min>
<max>3.0</max>
<decimal>2</decimal>
</parameter>
<parameter default="0.6" name="MPC_YAW_EXPO" type="FLOAT">
......@@ -4933,17 +4935,18 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<max>1.5</max>
<decimal>2</decimal>
</parameter>
<parameter default="0.0" name="MPC_Z_VEL_D" type="FLOAT">
<parameter default="0.0" name="MPC_Z_VEL_D_ACC" type="FLOAT">
<short_desc>Differential gain for vertical velocity error</short_desc>
<long_desc>defined as correction acceleration in m/s^2 per m/s^2 velocity derivative</long_desc>
<min>0.0</min>
<max>0.1</max>
<max>2.0</max>
<decimal>3</decimal>
</parameter>
<parameter default="0.1" name="MPC_Z_VEL_I" type="FLOAT">
<parameter default="2.0" name="MPC_Z_VEL_I_ACC" type="FLOAT">
<short_desc>Integral gain for vertical velocity error</short_desc>
<long_desc>Non zero value allows hovering thrust estimation on stabilized or autonomous takeoff.</long_desc>
<min>0.01</min>
<max>0.1</max>
<long_desc>defined as correction acceleration in m/s^2 per m velocity integral Non zero value allows hovering thrust estimation on stabilized or autonomous takeoff.</long_desc>
<min>0.2</min>
<max>2.0</max>
<decimal>3</decimal>
</parameter>
<parameter default="1.0" name="MPC_Z_VEL_MAX_DN" type="FLOAT">
......@@ -4961,10 +4964,11 @@ the setpoint will be capped to MPC_XY_VEL_MAX</short_desc>
<unit>m/s</unit>
<decimal>1</decimal>
</parameter>
<parameter default="0.2" name="MPC_Z_VEL_P" type="FLOAT">
<parameter default="4.0" name="MPC_Z_VEL_P_ACC" type="FLOAT">
<short_desc>Proportional gain for vertical velocity error</short_desc>
<min>0.1</min>
<max>0.4</max>
<long_desc>defined as correction acceleration in m/s^2 per m/s velocity error</long_desc>
<min>2.0</min>
<max>8.0</max>
<decimal>2</decimal>
</parameter>
<parameter default="0" name="WV_EN" type="INT32">
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment