From 2e0fcbbd1280ed19c6edc7184d31c15d49004dc1 Mon Sep 17 00:00:00 2001
From: PX4BuildBot <bot@px4.io>
Date: Thu, 17 Oct 2019 15:36:32 +0000
Subject: [PATCH] Update PX4 Firmware metadata Thu Oct 17 15:36:32 UTC 2019

---
 .../PX4/PX4ParameterFactMetaData.xml          | 47 ++++++++++---------
 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml b/src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
index 797847a7b..004f0500d 100644
--- a/src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
+++ b/src/FirmwarePlugin/PX4/PX4ParameterFactMetaData.xml
@@ -4542,6 +4542,32 @@ default 1.5 turns per second</short_desc>
     </parameter>
   </group>
   <group name="Multicopter Position Control">
+    <parameter default="0.4" name="CP_DELAY" type="FLOAT">
+      <short_desc>Average delay of the range sensor message plus the tracking delay of the position controller in seconds</short_desc>
+      <long_desc>Only used in Position mode.</long_desc>
+      <min>0</min>
+      <max>1</max>
+      <unit>seconds</unit>
+    </parameter>
+    <parameter default="-1.0" name="CP_DIST" type="FLOAT">
+      <short_desc>Minimum distance the vehicle should keep to all obstacles</short_desc>
+      <long_desc>Only used in Position mode. Collision avoidance is disabled by setting this parameter to a negative value</long_desc>
+      <min>-1</min>
+      <max>15</max>
+      <unit>meters</unit>
+    </parameter>
+    <parameter default="0" name="CP_GO_NO_DATA" type="FLOAT">
+      <short_desc>Boolean to allow moving into directions where there is no sensor data (outside FOV)</short_desc>
+      <long_desc>Only used in Position mode.</long_desc>
+      <boolean />
+    </parameter>
+    <parameter default="30." name="CP_GUIDE_ANG" type="FLOAT">
+      <short_desc>Angle left/right from the commanded setpoint by which the collision prevention algorithm can choose to change the setpoint direction</short_desc>
+      <long_desc>Only used in Position mode.</long_desc>
+      <min>0</min>
+      <max>90</max>
+      <unit>[deg]</unit>
+    </parameter>
     <parameter default="3.0" name="MPC_ACC_DOWN_MAX" type="FLOAT">
       <short_desc>Maximum vertical acceleration in velocity controlled modes down</short_desc>
       <min>2.0</min>
@@ -4605,27 +4631,6 @@ the vehicle will accelerate at this rate until the normal position control speed
         <value code="1">Jerk-limited trajectory</value>
       </values>
     </parameter>
-    <parameter default="30." name="MPC_COL_PREV_CNG" type="FLOAT">
-      <short_desc>Angle left/right from the commanded setpoint by which the collision prevention algorithm can choose to change the setpoint direction</short_desc>
-      <long_desc>Only used in Position mode.</long_desc>
-      <min>0</min>
-      <max>90</max>
-      <unit>[deg]</unit>
-    </parameter>
-    <parameter default="-1.0" name="MPC_COL_PREV_D" type="FLOAT">
-      <short_desc>Minimum distance the vehicle should keep to all obstacles</short_desc>
-      <long_desc>Only used in Position mode. Collision avoidance is disabled by setting this parameter to a negative value</long_desc>
-      <min>-1</min>
-      <max>15</max>
-      <unit>meters</unit>
-    </parameter>
-    <parameter default="0.4" name="MPC_COL_PREV_DLY" type="FLOAT">
-      <short_desc>Average delay of the range sensor message plus the tracking delay of the position controller in seconds</short_desc>
-      <long_desc>Only used in Position mode.</long_desc>
-      <min>0</min>
-      <max>1</max>
-      <unit>seconds</unit>
-    </parameter>
     <parameter default="3.0" name="MPC_CRUISE_90" type="FLOAT">
       <short_desc>Cruise speed when angle prev-current/current-next setpoint
 is 90 degrees. It should be lower than MPC_XY_CRUISE</short_desc>
-- 
2.22.0