Commit 000e0ef4 authored by Don Gagne's avatar Don Gagne

Remove the "Simulate" feature

parent 2f7fe9dd
...@@ -235,10 +235,6 @@ HEADERS += \ ...@@ -235,10 +235,6 @@ HEADERS += \
src/comm/LinkInterface.h \ src/comm/LinkInterface.h \
src/comm/LinkManager.h \ src/comm/LinkManager.h \
src/comm/MAVLinkProtocol.h \ src/comm/MAVLinkProtocol.h \
src/comm/MAVLinkSimulationLink.h \
src/comm/MAVLinkSimulationMAV.h \
src/comm/MAVLinkSimulationWaypointPlanner.h \
src/comm/MAVLinkSwarmSimulationLink.h \
src/comm/ProtocolInterface.h \ src/comm/ProtocolInterface.h \
src/comm/QGCFlightGearLink.h \ src/comm/QGCFlightGearLink.h \
src/comm/QGCHilLink.h \ src/comm/QGCHilLink.h \
...@@ -378,10 +374,6 @@ SOURCES += \ ...@@ -378,10 +374,6 @@ SOURCES += \
src/comm/LinkConfiguration.cc \ src/comm/LinkConfiguration.cc \
src/comm/LinkManager.cc \ src/comm/LinkManager.cc \
src/comm/MAVLinkProtocol.cc \ src/comm/MAVLinkProtocol.cc \
src/comm/MAVLinkSimulationLink.cc \
src/comm/MAVLinkSimulationMAV.cc \
src/comm/MAVLinkSimulationWaypointPlanner.cc \
src/comm/MAVLinkSwarmSimulationLink.cc \
src/comm/QGCFlightGearLink.cc \ src/comm/QGCFlightGearLink.cc \
src/comm/QGCJSBSimLink.cc \ src/comm/QGCJSBSimLink.cc \
src/comm/QGCXPlaneLink.cc \ src/comm/QGCXPlaneLink.cc \
......
...@@ -49,7 +49,6 @@ ...@@ -49,7 +49,6 @@
#include "QGCMessageBox.h" #include "QGCMessageBox.h"
#include "MainWindow.h" #include "MainWindow.h"
#include "UDPLink.h" #include "UDPLink.h"
#include "MAVLinkSimulationLink.h"
#include "SerialLink.h" #include "SerialLink.h"
#include "QGCSingleton.h" #include "QGCSingleton.h"
#include "LinkManager.h" #include "LinkManager.h"
......
...@@ -44,7 +44,6 @@ public: ...@@ -44,7 +44,6 @@ public:
TypeTcp, ///< TCP Link TypeTcp, ///< TCP Link
// TODO Below is not yet implemented // TODO Below is not yet implemented
#if 0 #if 0
TypeSimulation, ///< Simulation Link
TypeForwarding, ///< Forwarding Link TypeForwarding, ///< Forwarding Link
TypeXbee, ///< XBee Proprietary Link TypeXbee, ///< XBee Proprietary Link
TypeOpal, ///< Opal-RT Link TypeOpal, ///< Opal-RT Link
......
/*=====================================================================
QGroundControl Open Source Ground Control Station
(c) 2009, 2010 QGROUNDCONTROL PROJECT <http://www.qgroundcontrol.org>
This file is part of the QGROUNDCONTROL project
QGROUNDCONTROL is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
QGROUNDCONTROL is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with QGROUNDCONTROL. If not, see <http://www.gnu.org/licenses/>.
======================================================================*/
/**
* @file
* @brief Implementation of simulated system link
*
* @author Lorenz Meier <mavteam@student.ethz.ch>
*
*/
#include <cstdlib>
#include <cstdio>
#include <iostream>
#include <cmath>
#include <QTime>
#include <QImage>
#include <QDebug>
#include <QFileInfo>
#include "LinkManager.h"
#include "MAVLinkProtocol.h"
#include "MAVLinkSimulationLink.h"
#include "QGCMAVLink.h"
#include "QGC.h"
#include "MAVLinkSimulationMAV.h"
/**
* Create a simulated link. This link is connected to an input and output file.
* The link sends one line at a time at the specified sendrate. The timing of
* the sendrate is free of drift, which means it is stable on the long run.
* However, small deviations are mixed in to vary the sendrate slightly
* in order to simulate disturbances on a real communication link.
*
* @param readFile The file with the messages to read (must be in ASCII format, line breaks can be Unix or Windows style)
* @param writeFile The received messages are written to that file
* @param rate The rate at which the messages are sent (in intervals of milliseconds)
**/
MAVLinkSimulationLink::MAVLinkSimulationLink(QString readFile, QString writeFile, int rate) :
readyBytes(0),
timeOffset(0)
{
this->rate = rate;
_isConnected = false;
onboardParams = QMap<QString, float>();
onboardParams.insert("PID_ROLL_K_P", 0.5f);
onboardParams.insert("PID_PITCH_K_P", 0.5f);
onboardParams.insert("PID_YAW_K_P", 0.5f);
onboardParams.insert("PID_XY_K_P", 100.0f);
onboardParams.insert("PID_ALT_K_P", 0.5f);
onboardParams.insert("SYS_TYPE", 1);
onboardParams.insert("SYS_ID", systemId);
onboardParams.insert("RC4_REV", 0);
onboardParams.insert("RC5_REV", 1);
onboardParams.insert("HDNG2RLL_P", 0.7f);
onboardParams.insert("HDNG2RLL_I", 0.01f);
onboardParams.insert("HDNG2RLL_D", 0.02f);
onboardParams.insert("HDNG2RLL_IMAX", 500.0f);
onboardParams.insert("RLL2SRV_P", 0.4f);
onboardParams.insert("RLL2SRV_I", 0.0f);
onboardParams.insert("RLL2SRV_D", 0.0f);
onboardParams.insert("RLL2SRV_IMAX", 500.0f);
// Comments on the variables can be found in the header file
simulationFile = new QFile(readFile, this);
if (simulationFile->exists() && simulationFile->open(QIODevice::ReadOnly | QIODevice::Text))
{
simulationHeader = simulationFile->readLine();
}
receiveFile = new QFile(writeFile, this);
lastSent = QGC::groundTimeMilliseconds();
if (simulationFile->exists())
{
this->name = "Simulation: " + QFileInfo(simulationFile->fileName()).fileName();
}
else
{
this->name = "MAVLink simulation link";
}
// Initialize the pseudo-random number generator
srand(QTime::currentTime().msec());
maxTimeNoise = 0;
LinkManager::instance()->_addLink(this);
}
MAVLinkSimulationLink::~MAVLinkSimulationLink()
{
//TODO Check destructor
// fileStream->flush();
// outStream->flush();
// Force termination, there is no
// need for cleanup since
// this thread is not manipulating
// any relevant data
terminate();
delete simulationFile;
}
void MAVLinkSimulationLink::run()
{
status.voltage_battery = 0;
status.errors_comm = 0;
system.base_mode = MAV_MODE_PREFLIGHT;
system.custom_mode = MAV_MODE_FLAG_MANUAL_INPUT_ENABLED | MAV_MODE_FLAG_SAFETY_ARMED;
system.system_status = MAV_STATE_UNINIT;
forever
{
static quint64 last = 0;
if (QGC::groundTimeMilliseconds() - last >= rate)
{
if (_isConnected)
{
mainloop();
readBytes();
}
else
{
// Sleep for substantially longer
// if not connected
QGC::SLEEP::msleep(500);
}
last = QGC::groundTimeMilliseconds();
}
QGC::SLEEP::msleep(3);
}
}
void MAVLinkSimulationLink::sendMAVLinkMessage(const mavlink_message_t* msg)
{
// Allocate buffer with packet data
uint8_t buf[MAVLINK_MAX_PACKET_LEN];
unsigned int bufferlength = mavlink_msg_to_send_buffer(buf, msg);
// Pack to link buffer
readyBufferMutex.lock();
for (unsigned int i = 0; i < bufferlength; i++)
{
readyBuffer.enqueue(*(buf + i));
}
readyBufferMutex.unlock();
}
void MAVLinkSimulationLink::enqueue(uint8_t* stream, uint8_t* index, mavlink_message_t* msg)
{
// Allocate buffer with packet data
uint8_t buf[MAVLINK_MAX_PACKET_LEN];
unsigned int bufferlength = mavlink_msg_to_send_buffer(buf, msg);
//add data into datastream
memcpy(stream+(*index),buf, bufferlength);
(*index) += bufferlength;
}
void MAVLinkSimulationLink::mainloop()
{
// Test for encoding / decoding packets
// Test data stream
streampointer = 0;
// Fake system values
static float fullVoltage = 4.2f * 3.0f;
static float emptyVoltage = 3.35f * 3.0f;
static float voltage = fullVoltage;
static float drainRate = 0.025f; // x.xx% of the capacity is linearly drained per second
mavlink_attitude_t attitude;
memset(&attitude, 0, sizeof(mavlink_attitude_t));
mavlink_raw_imu_t rawImuValues;
memset(&rawImuValues, 0, sizeof(mavlink_raw_imu_t));
uint8_t buffer[MAVLINK_MAX_PACKET_LEN];
int bufferlength;
mavlink_message_t msg;
// Timers
static unsigned int rate1hzCounter = 1;
static unsigned int rate10hzCounter = 1;
static unsigned int rate50hzCounter = 1;
static unsigned int circleCounter = 0;
// Vary values
// VOLTAGE
// The battery is drained constantly
voltage = voltage - ((fullVoltage - emptyVoltage) * drainRate / rate);
if (voltage < 3.550f * 3.0f) voltage = 3.550f * 3.0f;
static int state = 0;
if (state == 0)
{
state++;
}
// 50 HZ TASKS
if (rate50hzCounter == 1000 / rate / 40)
{
if (simulationFile->isOpen())
{
if (simulationFile->atEnd()) {
// We reached the end of the file, start from scratch
simulationFile->reset();
simulationHeader = simulationFile->readLine();
}
// Data was made available, read one line
// first entry is the timestamp
QString values = QString(simulationFile->readLine());
QStringList parts = values.split("\t");
QStringList keys = simulationHeader.split("\t");
//qDebug() << simulationHeader;
//qDebug() << values;
bool ok;
static quint64 lastTime = 0;
static quint64 baseTime = 0;
quint64 time = QString(parts.first()).toLongLong(&ok, 10);
// FIXME Remove multiplicaton by 1000
time *= 1000;
if (ok) {
if (timeOffset == 0) {
timeOffset = time;
baseTime = time;
}
if (lastTime > time) {
// We have wrapped around in the logfile
// Add the measurement time interval to the base time
baseTime += lastTime - timeOffset;
}
lastTime = time;
time = time - timeOffset + baseTime;
// Gather individual measurement values
for (int i = 1; i < (parts.size() - 1); ++i) {
// Get one data field
bool res;
double d = QString(parts.at(i)).toDouble(&res);
if (!res) d = 0;
if (keys.value(i, "") == "Accel._X") {
rawImuValues.xacc = d;
}
if (keys.value(i, "") == "Accel._Y") {
rawImuValues.yacc = d;
}
if (keys.value(i, "") == "Accel._Z") {
rawImuValues.zacc = d;
}
if (keys.value(i, "") == "Gyro_Phi") {
rawImuValues.xgyro = d;
attitude.rollspeed = ((d-29.000)/15000.0)*2.7-2.7-2.65;
}
if (keys.value(i, "") == "Gyro_Theta") {
rawImuValues.ygyro = d;
attitude.pitchspeed = ((d-29.000)/15000.0)*2.7-2.7-2.65;
}
if (keys.value(i, "") == "Gyro_Psi") {
rawImuValues.zgyro = d;
attitude.yawspeed = ((d-29.000)/3000.0)*2.7-2.7-2.65;
}
if (keys.value(i, "") == "roll_IMU") {
attitude.roll = d;
}
if (keys.value(i, "") == "pitch_IMU") {
attitude.pitch = d;
}
if (keys.value(i, "") == "yaw_IMU") {
attitude.yaw = d;
}
//Accel._X Accel._Y Accel._Z Battery Bottom_Rotor CPU_Load Ground_Dist. Gyro_Phi Gyro_Psi Gyro_Theta Left_Servo Mag._X Mag._Y Mag._Z Pressure Right_Servo Temperature Top_Rotor pitch_IMU roll_IMU yaw_IMU
}
// Send out packets
// ATTITUDE
attitude.time_boot_ms = time/1000;
// Pack message and get size of encoded byte string
mavlink_msg_attitude_encode(systemId, componentId, &msg, &attitude);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// IMU
rawImuValues.time_usec = time;
rawImuValues.xmag = 0;
rawImuValues.ymag = 0;
rawImuValues.zmag = 0;
// Pack message and get size of encoded byte string
mavlink_msg_raw_imu_encode(systemId, componentId, &msg, &rawImuValues);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
//qDebug() << "ATTITUDE" << "BUF LEN" << bufferlength << "POINTER" << streampointer;
//qDebug() << "REALTIME" << QGC::groundTimeMilliseconds() << "ONBOARDTIME" << attitude.msec << "ROLL" << attitude.roll;
}
}
rate50hzCounter = 1;
}
// 10 HZ TASKS
if (rate10hzCounter == 1000 / rate / 9) {
rate10hzCounter = 1;
double lastX = x;
double lastY = y;
double lastZ = z;
double hackDt = 0.1f; // 100 ms
// Move X Position
x = 12.0*sin(((double)circleCounter)/200.0);
y = 5.0*cos(((double)circleCounter)/200.0);
z = 1.8 + 1.2*sin(((double)circleCounter)/200.0);
double xSpeed = (x - lastX)/hackDt;
double ySpeed = (y - lastY)/hackDt;
double zSpeed = (z - lastZ)/hackDt;
circleCounter++;
// x = (x > 5.0f) ? 5.0f : x;
// y = (y > 5.0f) ? 5.0f : y;
// z = (z > 3.0f) ? 3.0f : z;
// x = (x < -5.0f) ? -5.0f : x;
// y = (y < -5.0f) ? -5.0f : y;
// z = (z < -3.0f) ? -3.0f : z;
mavlink_message_t ret;
// Send back new position
mavlink_msg_local_position_ned_pack(systemId, componentId, &ret, 0, x, y, -fabs(z), xSpeed, ySpeed, zSpeed);
bufferlength = mavlink_msg_to_send_buffer(buffer, &ret);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// // GPS RAW
// mavlink_msg_gps_raw_pack(systemId, componentId, &ret, 0, 3, 47.376417+(x*0.00001), 8.548103+(y*0.00001), z, 0, 0, 2.5f, 0.1f);
// bufferlength = mavlink_msg_to_send_buffer(buffer, &ret);
// //add data into datastream
// memcpy(stream+streampointer,buffer, bufferlength);
// streampointer += bufferlength;
// GLOBAL POSITION
mavlink_msg_global_position_int_pack(systemId, componentId, &ret, 0, (473780.28137103+(x))*1E3, (85489.9892510421+(y))*1E3, (z+550.0)*1000.0, (z+550.0)*1000.0-1, xSpeed, ySpeed, zSpeed, yaw);
bufferlength = mavlink_msg_to_send_buffer(buffer, &ret);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// GLOBAL POSITION VEHICLE 2
mavlink_msg_global_position_int_pack(systemId+1, componentId+1, &ret, 0, (473780.28137103+(x+0.00001))*1E3, (85489.9892510421+((y/2)+0.00001))*1E3, (z+550.0)*1000.0, (z+550.0)*1000.0-1, xSpeed, ySpeed, zSpeed, yaw);
bufferlength = mavlink_msg_to_send_buffer(buffer, &ret);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// // ATTITUDE VEHICLE 2
// mavlink_msg_attitude_pack(54, MAV_COMP_ID_IMU, &ret, 0, 0, 0, atan2((y/2)+0.3, (x+0.002)), 0, 0, 0);
// sendMAVLinkMessage(&ret);
// // GLOBAL POSITION VEHICLE 3
// mavlink_msg_global_position_int_pack(60, componentId, &ret, 0, (473780.28137103+(x/2+0.002))*1E3, (85489.9892510421+((y*2)+0.3))*1E3, (z+590.0)*1000.0, 0*100.0, 0*100.0, 0*100.0);
// bufferlength = mavlink_msg_to_send_buffer(buffer, &ret);
// //add data into datastream
// memcpy(stream+streampointer,buffer, bufferlength);
// streampointer += bufferlength;
static int rcCounter = 0;
if (rcCounter == 2) {
mavlink_rc_channels_t chan;
chan.time_boot_ms = 0;
chan.chan1_raw = 1000 + ((int)(fabs(x) * 1000) % 2000);
chan.chan2_raw = 1000 + ((int)(fabs(y) * 1000) % 2000);
chan.chan3_raw = 1000 + ((int)(fabs(z) * 1000) % 2000);
chan.chan4_raw = (chan.chan1_raw + chan.chan2_raw) / 2.0f;
chan.chan5_raw = (chan.chan3_raw + chan.chan4_raw) / 2.0f;
chan.chan6_raw = (chan.chan3_raw + chan.chan2_raw) / 2.0f;
chan.chan7_raw = (chan.chan4_raw + chan.chan2_raw) / 2.0f;
chan.chan8_raw = 0;
chan.rssi = 100;
mavlink_msg_rc_channels_encode(systemId, componentId, &msg, &chan);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
rcCounter = 0;
}
rcCounter++;
}
// 1 HZ TASKS
if (rate1hzCounter == 1000 / rate / 1) {
// STATE
static int statusCounter = 0;
if (statusCounter == 100) {
system.base_mode = (system.base_mode + 1) % MAV_MODE_ENUM_END;
statusCounter = 0;
}
statusCounter++;
static int detectionCounter = 6;
if (detectionCounter % 10 == 0) {
}
detectionCounter++;
status.voltage_battery = voltage * 1000; // millivolts
status.load = 33 * detectionCounter % 1000;
// Pack message and get size of encoded byte string
mavlink_msg_sys_status_encode(systemId, componentId, &msg, &status);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// Pack debug text message
mavlink_statustext_t text;
text.severity = 0;
strcpy((char*)(text.text), "Text message from system 32");
mavlink_msg_statustext_encode(systemId, componentId, &msg, &text);
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
memcpy(stream+streampointer, buffer, bufferlength);
streampointer += bufferlength;
/*
// Pack message and get size of encoded byte string
mavlink_msg_boot_pack(systemId, componentId, &msg, version);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;*/
// HEARTBEAT
static int typeCounter = 0;
uint8_t mavType;
if (typeCounter < 10)
{
mavType = MAV_TYPE_QUADROTOR;
}
else
{
mavType = typeCounter % (MAV_TYPE_GCS);
}
typeCounter++;
// Pack message and get size of encoded byte string
mavlink_msg_heartbeat_pack(systemId, componentId, &msg, mavType, MAV_AUTOPILOT_PIXHAWK, system.base_mode, system.custom_mode, system.system_status);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//qDebug() << "CRC:" << msg.ck_a << msg.ck_b;
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// Pack message and get size of encoded byte string
mavlink_msg_heartbeat_pack(systemId+1, componentId+1, &msg, mavType, MAV_AUTOPILOT_GENERIC, system.base_mode, system.custom_mode, system.system_status);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//qDebug() << "CRC:" << msg.ck_a << msg.ck_b;
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
// Send controller states
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
memcpy(stream+streampointer, buffer, bufferlength);
streampointer += bufferlength;
// Pack message and get size of encoded byte string
mavlink_msg_sys_status_encode(54, componentId, &msg, &status);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
rate1hzCounter = 1;
}
// FULL RATE TASKS
// Default is 50 Hz
/*
// 50 HZ TASKS
if (rate50hzCounter == 1000 / rate / 50)
{
//streampointer = 0;
// Attitude
// Pack message and get size of encoded byte string
mavlink_msg_attitude_pack(systemId, componentId, &msg, usec, roll, pitch, yaw, 0, 0, 0);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);
streampointer += bufferlength;
rate50hzCounter = 1;
}*/
readyBufferMutex.lock();
for (unsigned int i = 0; i < streampointer; i++) {
readyBuffer.enqueue(*(stream + i));
}
readyBufferMutex.unlock();
// Increment counters after full main loop
rate1hzCounter++;
rate10hzCounter++;
rate50hzCounter++;
}
void MAVLinkSimulationLink::writeBytes(const char* data, qint64 size)
{
// Parse bytes
mavlink_message_t msg;
mavlink_status_t comm;
uint8_t stream[2048];
int streampointer = 0;
uint8_t buffer[MAVLINK_MAX_PACKET_LEN];
int bufferlength = 0;
// Initialize drop count to 0 so it isn't referenced uninitialized when returned at the bottom of this function
comm.packet_rx_drop_count = 0;
// Output all bytes as hex digits
for (int i=0; i<size; i++)
{
if (mavlink_parse_char(getMavlinkChannel(), data[i], &msg, &comm))
{
// MESSAGE RECEIVED!
// qDebug() << "SIMULATION LINK RECEIVED MESSAGE!";
emit messageReceived(msg);
switch (msg.msgid)
{
// SET THE SYSTEM MODE
case MAVLINK_MSG_ID_SET_MODE:
{
mavlink_set_mode_t mode;
mavlink_msg_set_mode_decode(&msg, &mode);
// Set mode indepent of mode.target
system.base_mode = mode.base_mode;
}
break;
// EXECUTE OPERATOR ACTIONS
case MAVLINK_MSG_ID_COMMAND_LONG:
{
mavlink_command_long_t action;
mavlink_msg_command_long_decode(&msg, &action);
// qDebug() << "SIM" << "received action" << action.command << "for system" << action.target_system;
// FIXME MAVLINKV10PORTINGNEEDED
// switch (action.action) {
// case MAV_ACTION_LAUNCH:
// status.status = MAV_STATE_ACTIVE;
// status.mode = MAV_MODE_AUTO;
// break;
// case MAV_ACTION_RETURN:
// status.status = MAV_STATE_ACTIVE;
// break;
// case MAV_ACTION_MOTORS_START:
// status.status = MAV_STATE_ACTIVE;
// status.mode = MAV_MODE_LOCKED;
// break;
// case MAV_ACTION_MOTORS_STOP:
// status.status = MAV_STATE_STANDBY;
// status.mode = MAV_MODE_LOCKED;
// break;
// case MAV_ACTION_EMCY_KILL:
// status.status = MAV_STATE_EMERGENCY;
// status.mode = MAV_MODE_MANUAL;
// break;
// case MAV_ACTION_SHUTDOWN:
// status.status = MAV_STATE_POWEROFF;
// status.mode = MAV_MODE_LOCKED;
// break;
// }
}
break;
case MAVLINK_MSG_ID_PARAM_REQUEST_LIST:
{
// qDebug() << "GCS REQUESTED PARAM LIST FROM SIMULATION";
mavlink_param_request_list_t read;
mavlink_msg_param_request_list_decode(&msg, &read);
if (read.target_system == systemId)
{
// Output all params
// Iterate through all components, through all parameters and emit them
QMap<QString, float>::iterator i;
// Iterate through all components / subsystems
int j = 0;
for (i = onboardParams.begin(); i != onboardParams.end(); ++i) {
if (j != 5) {
// Pack message and get size of encoded byte string
mavlink_msg_param_value_pack(read.target_system, componentId, &msg, i.key().toStdString().c_str(), i.value(), MAV_PARAM_TYPE_REAL32, onboardParams.size(), j);
// Allocate buffer with packet data
bufferlength = mavlink_msg_to_send_buffer(buffer, &msg);
//add data into datastream
memcpy(stream+streampointer,buffer, bufferlength);